户内变电站三维设计应用研究

目前,户内变电站普遍采用二维设计,整个工程设计依靠设计人员的空间想象力和工程制图技能完成三维空间设计,这种方法缺乏对设计质量的有效控制,已难以适应目前各电网公司对设计精细化的需求。户内变电站三维设计具有直观、智能等特点,在适应了复杂的户内变电站设计、不断压缩的设计周期和设计资料的数字化移交等要求的同时,完善了工程设计人员充分表达设计思想的手段,是一种能提高项目质量的助推器,也是实现变电工程全寿命周期管理的有效工具,更是未来变电工程设计的发展趋势。     

基于SkyEye的嵌入式Linux移植仿真技术研究

在嵌入式系统开发中,经常需要硬件开发板来调测软件,不仅操作繁琐,硬件环境不稳定时问题也很难定位;有时还会遇到软件等待硬件调试,延误开发周期的情况。在PC桌面系统下,探讨了一种基于SkyEye虚拟硬件技术的嵌入式平台仿真技术,介绍如何建立仿真基础环境,编译嵌入式Linux内核,制作根文件系统,编译、配置SkyEye,以S3C6410X为目标机处理器,将Linux内核及文件系统移植到基于SkyEye虚拟的ARM体系架构下,为嵌入式系统的研发探索了一种新的途径。     

2-羟基-3-烯丙氧基丙磺酸钠的合成

采用新方法合成了2-羟基-3-烯丙氧基丙磺酸钠。先由环氧氯丙烷和亚硫酸氢钠合成中间体3-氯-2-羟基丙磺酸钠，然后中间体再与丙烯醇在氢氧化钠催化下生成目标产物2-羟基-3-烯丙氧基丙磺酸钠。2步反应总收率在70％左右，中间体和产物分别进行了光谱表征。     

Detonation velocity of BTNEN/Al

The effect of the addition of Al on the detonation velocity of bis(2,2,2-trinitroethyl) nitramine (BTNEN) was studied experimentally. It is shown that the dependence of the detonation velocity of BTNEN on the initial density is nearly linear, and a 75/25 BTNEN/Al mixture is characterized by an increase in the slope of the dependence with increasing density. The addition of Al decreases the detonation velocity of BTNEN. The density range characterized by a maximum decrease in the detonation velocity is determined. A comparison of experimental detonation velocities of BTNEN/Al mixtures with literature data obtained by calculations taking into account a possible change in the phase state of Al₂O₃ showed that the thermodynamic model used in the calculations needs to be improved. __________ Translated from Fizika Goreniya i Vzryva, Vol. 42, No. 4, pp. 125–130, July–August, 2006.     

移动视频通信业务的应用研究

移动视频通信业务是通过移动网络和移动终端为移动用户提供的一种新型通信服务。本文主要研究了基于3G和Vo LTE技术的移动视频通信业务的应用。分别从技术、资费、用户体验、互通性四个方面对两种移动视频通信业务进行了分析和对比。     

水中"一锅"合成7,7-二甲基-4-(3-氯苯基)-5-氧代-3,4,5,6,7,8-六氢香豆素的洁净方法

研究了四丁基溴化铵(TBAB)催化下的水介质中,3-氯苯甲醛、丙二酸亚异丙酯和5,5-二甲基-1,3-环己二酮三组分缩合,一步合成系列7,7-二甲基-4-(3-氯苯基)-5-氧代-3,4,5,6,7,8-六氢香豆素。产物的结构经IR和1HNMR进行了表征确证。该方法具有反应条件温和、操作简便、环境友好的优点。     

基于Flash 3D的在线虚拟漫游系统设计与实现

对目前虚拟漫游系统的瓶颈进行分析,提出并实现了一个基于Flash 3D的、优化了的在线虚拟旅游系统。系统对三维场景文件包括模型文件、材质文件及其构建步骤进行优化,并在实现了对多种媒体元素支持的基础上,设计了独创的热点系统,实现对三维场景按需进行加载和展示,以及游客在场景中的互动漫游。系统测试结果表明,该设计方案优化效果显著,系统性能得到了极大的提升。     

基于糊模ID3算法的高校学生流失数据挖掘研究

目前高校不断扩招,生源却逐渐减少,于是预防和减少学生流失正成为各高校必须面对的问题。通过对高校学生流失情况进行数据挖掘,可发现一些有价值的信息,为解决高校学生流失问题提供帮助。基于糊模理论提出了糊模ID3算法,并将该算法运用于分析高校学生流失原因之中。通过实验证明,该算法生成的决策树更加合理,分类速度更快,为解决高校学生流失问题提供了理论依据。     

4-乙基-2,3-双氧哌嗪酰氯的提取及分析

用双-三氯甲基碳酸酯(三光气)代替光气和4-乙基-2,3-双氧哌嗪发生酰氯化反应制备哌嗪酰氯(EOCP),反应液用硅醚提取,得到产品4-乙基-2,3-双氧哌嗪.反应收率可达92.28%,产品纯度为82.49%.     

The SMSI between supported platinum and CeO2–ZrO2–La2O3 mixed oxides in oxidative atmosphere

CeO₂–ZrO₂–La₂O₃ (CZL) mixed oxides were prepared by citric acid sol–gel method. The as-received gel was calcined at 500, 700, 900 and 1050 °C to obtain the so-called C5, C7, C9 and CK, respectively. The C5, C7 and C9 powders were impregnated with H₂PtCl₆ and then calcined at 500 °C to prepare P5C5, P5C7 and P5C9, respectively. The impregnated CK powders were calcined at 500, 700 and 900 °C to prepare P5CK, P7CK and P9CK, respectively. The XRD and XPS analyses show that the surface distribution of Pt is evidently influenced by the structural and textural properties of the support. The CO adsorption followed by FTIR reveals that the dispersion and the chemisorption sites of Pt are reduced as the calcination temperature of CZL support increases. The chemisorption ability of the CK samples is even completely deactivated. The encapsulation mechanism, which has been applied to explain the so-called strong metal–support interaction (SMSI) after reductive treatment, is introduced here to demonstrate the abnormal observations though the samples were prepared in oxidative atmosphere. The HRTEM results also confirm this explanation. The effects of oxygen vacancies, the chemisorption sites on the Pt surface and Pt/Ce interfacial sites on the three-way catalytic activities are discussed.