无柱雨棚桩基托换技术的应用分析

结合某地铁区间无柱雨棚托换工程实例,介绍了托换体系的选择、被动托换体系的设计、施工及监测相关内容,以期为相关工程提供一定的借鉴。     

A simple parameterization of canopy reflectance using photon recollision probability

Information on the fractions of incident radiation reflected, transmitted and absorbed by a plant canopy is crucial in remote sensing of vegetation and modeling of canopy microclimate. Photon recollision probability p allows to calculate easily the spectral behavior of canopy scattering, i.e. the sum of canopy reflectance and transmittance. However, to divide the scattered radiation into reflected and transmitted fluxes, additional models are needed. In this paper, we present a simple formula to estimate the fraction of radiation scattered upwards by a canopy. The new method is semi-empirical, makes use of the concept of photon recollision probability, and is derived from an analysis of modeling results. Although a physical interpretation is given for the single additional parameter needed in the formula, the scattering asymmetry parameter q, the method is not strictly based on the radiative transfer equation. Our results indicate that the method is accurate for low to moderate leaf area index (LAI) values, and provides a reasonable approximation even at LAI = 8. In addition, we present a method to compute p using numerical radiative transfer models.     

Validation of the forest radiative transfer model FRT

The components of the forest radiative transfer model FRT developed at Tartu Observatory, Estonia are compared to the results of measurements of forest canopy downward radiance under forest canopy. Measurements were performed with a hemispheric-view imaging CCD-radiometer which was specially designed for this task. A thorough study of metrological properties of the radiometer was carried out and the respective preprocessing algorithms were created. The angular distribution of view probabilities and NIR radiances for tree crowns, trunks and canopy gaps are measured and compared to the model simulations for two coniferous and a broadleaf forests. Generally, the model reproduced the angular courses of component probabilities and NIR radiances rather well, however, in some cases problems with both the absolute levels of radiance and the angular course arose.     

A LiDAR-derived canopy density model for tree stem and crown mapping in Australian forests

The retrieval of tree and forest structural attributes from Light Detection and Ranging (LiDAR) data has focused largely on utilising canopy height models, but these have proved only partially useful for mapping and attributing stems in complex, multi-layered forests. As a complementary approach, this paper presents a new index, termed the Height-Scaled Crown Openness Index (HSCOI), which provides a quantitative measure of the relative penetration of LiDAR pulses into the canopy. The HSCOI was developed from small footprint discrete return LiDAR data acquired over mixed species woodlands and open forests near Injune, Queensland, Australia, and allowed individual trees to be located (including those in the sub-canopy) and attributed with height using relationships (r² = 0.81, RMSE = 1.85 m, n = 115; 4 outliers removed) established with field data. A threshold contour of the HSCOI surface that encompassed ∼ 90% of LiDAR vegetation returns also facilitated mapping of forest areas, delineation of tree crowns and clusters, and estimation of canopy cover. At a stand level, tree density compared well with field measurements (r² = 0.82, RMSE = 133 stems ha^− 1, n = 30), with the most consistent results observed for stem densities ≤ 700 stems ha^− 1. By combining information extracted from both the HSCOI and the canopy height model, predominant stem height (r² = 0.91, RMSE = 0.77 m, n = 30), crown cover (r² = 0.78, RMSE = 9.25%, n = 30), and Foliage & Branch Projective Cover (FBPC; r² = 0.89, RMSE = 5.49%, n = 30) were estimated to levels sufficient for inventory of woodland and open forest structural types. When the approach was applied to forests in north east Victoria, stem density and crown cover were reliably estimated for forests with a structure similar to those observed in Queensland, but less so for forests of greater height and canopy closure.     

Exploring LiDAR-RaDAR synergy—predicting aboveground biomass in a southwestern ponderosa pine forest using LiDAR, SAR and InSAR

Scanning Light Detecting and Ranging (LiDAR), Synthetic Aperture Radar (SAR) and Interferometric SAR (InSAR) were analyzed to determine (1) which of the three sensor systems most accurately predicted forest biomass, and (2) if LiDAR and SAR/InSAR data sets, jointly considered, produced more accurate, precise results relative to those same data sets considered separately. LiDAR ranging measurements, VHF-SAR cross-sectional returns, and X- and P-band cross-sectional returns and interferometric ranges were regressed with ground-estimated (from dbh) forest biomass in ponderosa pine forests in the southwestern United States. All models were cross-validated. Results indicated that the average canopy height measured by the scanning LiDAR produced the best predictive equation. The simple linear LiDAR equation explained 83% of the biomass variability (n = 52 plots) with a cross-validated root mean square error of 26.0 t/ha. Additional LiDAR metrics were not significant to the model. The GeoSAR P-band (λ = 86 cm) cross-sectional return and the GeoSAR/InSAR canopy height (X-P) captured 30% of the forest biomass variation with an average predictive error of 52.5 t/ha. A second RaDAR-FOPEN collected VHF (λ ∼ 7.8 m) and cross-polarized P-band (λ = 88 cm) cross-sectional returns, none of which proved useful for forest biomass estimation (cross-validated R² = 0.09, RMSE = 63.7 t/ha). Joint consideration of LiDAR and RaDAR measurements produced a statistically significant, albeit small improvement in biomass estimation precision. The cross-validated R² increased from 83% to 84% and the prediction error decreased from 26.0 t/ha to 24.9 t/ha when the GeoSAR X-P interferometric height is considered along with the average LiDAR canopy height. Inclusion of a third LiDAR metric, the 60th decile height, further increased the R² to 85% and decreased the RMSE to 24.1 t/ha. On this 11 km² ponderosa pine study area, LiDAR data proved most useful for predicting forest biomass. RaDAR ranging measurements did not improve the LiDAR estimates.     

Reflectance seasonality and its relation to the canopy leaf area index in an eastern Siberian larch forest: Multi-satellite data and radiative transfer analyses

Reliable monitoring of seasonality in the forest canopy leaf area index (LAI) in Siberian forests is required to advance the understanding of climate-forest interactions under global environmental change and to develop a forest phenology model within ecosystem modeling. Here, we compare multi-satellite (AVHRR, MODIS, and SPOT/VEGETATION) reflectance, normalized difference vegetation index (NDVI), enhanced vegetation index (EVI), and LAI with aircraft-based spectral reflectance data and field-measured forest data acquired from April to June in 2000 in a larch forest near Yakutsk, Russia. Field data in a 30 × 30-m study site and aircraft data observed around the field site were used. Larch is a dominant forest type in eastern Siberia, but comparison studies that consider multi-satellite data, aircraft-based reflectance, and field-based measurement data are rarely conducted. Three-dimensional canopy radiative transfer calculations, which are based on Antyufeev and Marshak's [Antyufeev, V.S., & Marshak, A.L. (1990). Monte Carlo method and transport equation in plant canopies, Remote Sensing of Environment, 31, 183-191] Monte Carlo photon transport method combined with North's [North, P.R. (1996). Three-dimensional forest light interaction model using a Monte Carlo method, IEEE Transactions on Geoscience and Remote Sensing, 34(4), 946-956] geometric-optical hybrid forest canopy scene, helped elucidate the relationship between canopy reflectance and forest structural parameters, including several forest floor conditions. Aircraft-based spectral measurements and the spectral response functions of all satellite sensors confirmed that biases in reflectance seasonality caused by differences in spectral response functions among sensors were small. However, some reflectance biases occur among the near infrared (NIR) reflectance data from satellite products; these biases were potentially caused by absolute calibration errors or cloud/cloud shadow contamination. In addition, reflectance seasonality in AVHRR-based NIR data was very small compared to other datasets, which was partially due to the spring-to-summer increase in the amount of atmospheric water vapor. Radiative transfer simulations suggest that bi-directional reflectance effects were small for the study site and observation period; however, changes in tree density and forest floor conditions affect the absolute value of NIR reflectance, even if the canopy leaf area condition does not change. Reliable monitoring of canopy LAI is achieved by minimizing these effects through the use of NIR reflectance difference, i.e., the difference in reflectance on the observation day from the reflectance on a snow-free/pre-foliation day. This may yield useful and robust parameters for multi-satellite monitoring of the larch canopy LAI with less error from intersensor biases and forest structure/floor differences. Further validation with field data and combined use of other index (e.g. normalized difference water index, NDWI) data will enable an extension of these findings to all Siberian deciduous forests.     

Direct retrieval of the shape of leaf spectral albedo from multiangular hyperspectral Earth observation data

Physically-based retrieval of vegetation canopy properties from remote sensing data presumes a knowledge of the spectral albedo of the basic scattering unit, i.e. leaf. In this paper, we present a novel method to directly retrieve the spectral dependence of leaf single-scattering albedo of a closed broadleaf forest canopy from multiangular hyperspectral satellite imagery. The new algorithm is based on separating the reflected signal into a linear (first-order) and non-linear (diffuse) reflectance component. A limitation of the proposed algorithm is that the leaf single-scattering albedo ω(λ) is retrieved with an accuracy of a structural parameter (called a₀) which, in turn, depends on canopy bidirectional gap probability, ratio of leaf reflectance to transmittance, and distribution of leaf normals. The structural parameter (a₀) was found to depend on tree-level structural parameters, such as tree height and volume of a single crown, but not the amount of leaf area.     

基于Canopy聚类的噪声自适应模糊C-均值算法

针对局部空间信息的模糊C-均值算法（WFLICM）中空间影响因子容易受到噪声影响出现错误标识的问题,提出一种融合局部和非局部空间信息的模糊C-均值聚类图像分割算法(NLWFLICM),在WFLICM算法的模糊影响因子中引入非局部空间信息,根据噪声程度自适应地设置局部和非局部信息权重,并重新标记中心点的模糊影响因子。实验结果表明,NLWFLICM算法具有比WFLICM算法更强的鲁棒性和自适应性,并在一定程度上提高了WFLICM算法对含有大量噪声图像进行分割的鲁棒性,同时保留了图像的纹理。为了提高算法的聚类性能和收敛速度,结合Canopy算法能够快速对数据进行粗聚类的优点,提出基于Canopy聚类与非局部空间信息的FCM图像分割改进算法（Canopy-NLWFLICM）,可以在NLWFLICM算法聚类前,对聚类中心进行预处理,从而提高收敛速度和图像分割精度。     

基于图嵌入的用户加权Slope One算法

针对传统Slope One推荐算法在稀疏数据集上预测准确率较低的问题,提出一种基于图嵌入的加权Slope One算法。本文算法首先以融合时间信息的用户相似度为边权建立用户关联图,对该图进行图嵌入得到用户特征向量,然后基于Canopy聚类对用户进行类内加权Slope One推荐。另外,为优化算法性能,本文算法基于Spark计算框架实现。实验结果表明,对比传统的加权Slope One,本文算法在稀疏数据集和显式、隐式评分数据集上的推荐效果和评分预测准确率都更优。