活性污泥生物吸附性能的研究

探讨了活性污泥生物吸附作用的影响因素。吸附性能随温度升高而降低,在20~30min之间,可达到吸附平衡,且温度越高,达到吸附平衡的时间越长;活性污泥对悬浮性有机物的吸附性能高于对溶解性和胶体性有机物的吸附;对高浓度污水吸附性能高于低浓度污水的吸附性能;抑制剂对污泥的吸附作用有影响。     

时间最优开关控制的非线性规划方法

提出单输入非线性时间最优开关控制的非线性规划算法．针对不同的开关控制划分未知时间段，以时间段为变量建立与最优控制等价的非线性规划模型．构造每个未知时间段的等分龙格库塔格式，该格式不但不增加未知变量，而且可构造出不含导数的非线性规划算法．利用龙格库塔格式的收敛性和非线性规划的一阶最优性条件证明该方法的收敛性．最后以实例验证该算法．     

可变时滞系统的控制与仿真

炉温变化时硬质合金真空烧结炉的时滞常数变化很大，常规PID控制不能同时在高温段与低温段满足生产工艺提出的控制品质要求。本文在利用最小二乘法拟合出真空烧结炉时滞常数与炉温变化函数的基础上，PID参数采用经典的CHR整定算法随炉温变化实时整定，并利用MAT—LAB仿真软件对该控制算法在真空烧结炉中的应用进行了仿真研究，结果表明该算法能够实现对真空炉的有效控制，控制系统能够满意地跟踪设定的温度曲线。     

基于被动测试的web应用测量

提出一种新的基于被动测试的web应用测量方法,以便准确、快速的获取应用特征与状态信息。设计了web应用测量协议WMP,并对基于该协议的测量系统进行了设计与实现。实验表明该系统能够准确快速地对待测的应用协议交互部分进行测量,为应用管理提供丰富有效的信息。     

时间分解光谱技术在钢铁分析中的应用

研究了单火花光谱在不同采样时间段分析灵敏度与窗口的关系,P、S、Al、Ni、Ti、B、Mg、Sb、Pb、As、Bi、Ta、Sn应用TRS技术检出限明显降低,而C、Si、Mn、Cr、Mo、V、W、Co、Nb则不显著;合适的采样窗口能提高Sb的分析准确度,Mg则可减少背景波动带来的影响,Cu可扩大分析线性范围;采用TRS技术在诸有效元素中分析灵敏度可提高1.36～5.00倍,能更好地满足品种钢的研究开发与生产检验的需求.     

级数sum from n=1 to ∞(α(α-1)…(α-n+1)x~n/n!)在x=±1处的敛散性研究

用比较原则及莱布尼兹判别法对函数f(x)=(1+x)α的马克劳林级数在x=±1的敛散情形给予讨论.     

Note on filon-type integration for higher order exponential time differencing methods in stiff systems

The Filon-type quadrature is efficient for highly oscillatory functions — Fourier transforms. Based on Cox and Matthews’ ETD schemes, the higher order single step exponential time differencing schemes are presented based on the Filon-type integration and the A-stability of the two-order Adams-Bashforth exponential time differencing scheme is considered. The effectiveness and accuracy of the schemes is tested. Foundation item: Projects(02JJY2006, 03JJY2001) supported by Natural Science Foundation of Hunan Province; project supported by JSPS Fellowship Research Program     

a尺度Haar小波基的构造

对伸缩因子a为大于1的正整数的Haar小波基进行了统一构造，并给出了分解和重构算法。指出只需对一实对称矩阵求特征向量，便容易得到相应的a-1个母小波。     

Application of advanced core process monitoring procedures in German power reactors

The nuclear reactor core design and the nuclear fuel management have been changed remarkable during the last few years. This development was initiated by increasing costs for the fuel recycling and nuclear waste storage. The fuel material, the fuel pellet fabrication, the fuel assembly structure and the core composition have been varied to get an effective fuel exploitation. Based on advanced core process conditions the reactor power and the fuel burn-up have been increased at German plants in recent years. Improved dynamic process monitoring procedures are required to get more information about the varied core process behaviour during the reactor operation. Since several years ISTec has been performed investigations to the process monitoring based on process signal measurements in German nuclear power plants. Using the standard instrumentation of the plants process signals have been measured and analysed by means of the digital data acquisition system SIGMA. The measured time signals are influenced by core process transients, global and local process fluctuations and by signal line transfer functions. Advanced time series analysis methods have been applied to separate different process effects in the multiple signal matrix. The separation of different process influences can improve significantly the information about the process condition in the reactor core.     

99Tcm-PHY和113Inm-DTPA双核素胃排空显像检查

采用99Tcm-植酸钠(PHY)标记鸡肝(固相)和113Inm-DTPA(液相)混合餐作双核素显像检测受试者的胃半排空时间(T1/2),建立正常值;并对非胰岛素依赖性糖尿病、十二指肠溃疡、功能性消化不良、硬皮病等165例患者的胃排空时间进行检测与分析。结果表明:20例正常对照组液相食物T1/2为25.7～53.7min,平均41.2±9.1min;固相食物T1/2为50.5～100.3min,平均70.5±16.5min。正常上限:液相T1/2为60min,固相T1/2为104min。107例糖尿病患者中有固相食物排空延迟者达47例,占43.9%,并有液相食物延迟者19例,占17.8%。经西沙比利治疗后复查,均见有胃排空的明显改善。硬皮病患者的胃排空延迟最严重,且所占比率达82%。双核素胃排空显像检查尤其是固相食物检查为临床胃排空研究提供了灵敏可靠的检查方法。