旧貌换新颜 --漫谈东方花园酒店的改造设计

结合实例，探讨把老办公楼改造为五星级涉外宾馆的过程中遇到的问题及其解决方法。     

A geometry-based error estimation for cross-ratios

For choosing specific cross-ratios as 2D projective coordinates in various computer vision applications, a reasonable error analysis model is usually required. This investigation adopts the assumption of normal distribution for positioning errors of point features in an image to formulate the error variances of cross-ratios. Based on a geometry-based error analysis, a straightforward way of identifying the cross-ratios with minimum error variances is proposed. Simulation results show that the proposed approach, as well as a further simplified alternative, yield much better estimations of minimum error variances in terms of accuracy, cost, and stability compared with some other methods, e.g., the one based on the rule given by Georis et al. (IEEE Trans. Pattern Anal. Mach. Intell. 20 (4) (1998) 366). Some causes of the performance differences in the estimations are explained using a special configuration of point features.     

A tolerant approach to reconstruct topology from unorganized trimmed surfaces

Presented in this paper is a topology reconstruction algorithm from a set of unorganized trimmed surfaces. Error-prone small geometric elements are handled to give proper topological information. It gives complete topology to topologically complete models, and it is also tolerant to incomplete models. The proposed algorithm is vertex-based in that clues for topological information are searched from the set of vertices first, not from that of edges.     

链条锅炉的节能改造

本文针对株洲硬质合金厂SHL20—13—AII型20t蒸汽链条锅炉存在的问题，进行了节能改造，取得了显著的成效。     

连铸净化加压站改造

因攀钢动力厂连铸加压站的高压焦炉煤气供应不能满足生产需要，对它进行了相应改造。使工艺更加完善，煤气净化质量得到提高，并解决了生产中的一些问题。     

高能 X 射线工业 CT 技术的研究进展

目的 研究分析了国内外高能X射线工业CT技术的进展情况，方法 通过有关文献资料，对目前国际上主要的高能X射线工业CT技术及设备进行评述。结果和结论 对美国、德国等发达国家的高能X射线工业CT设备、线阵探测器、面陈探测器及重建算法进行了分析。     

一种放射CT重建的鲁棒估计算法

放射CT的重建问题可以归结为一种基于泊松分布的最大似然估计（MuxnimumLikelihood,ML），其中最著名的如EM算法[1]，这种算法存在的问题是鲁棒性不强，当观测数据中存在一些出格点（outlier）（如2％）时，EM算法的性能就变得很差。本文分析了算法性能变差的原因，将泊松分布近似为高斯分布后，仿照鲁律估计中的M-估计，构造了一种鲁棒性很强的EM改进算法。实验结果表明，即使在投影数据中混有10％的出格点，仍能重建出满意的结果来。     

Ruins and Revival: Paris in the Aftermath of the Second World War

Although many devastated European cities have been studied, the bombing and reconstruction of key industrial sites and certain suburban residential zones in greater Paris have received little scholarly attention. Using archival sources, this article explores both destruction and reconstruction, and traces how homeless families shared apartments or endured years of 'temporary' accommodation in huts and other shelters. Post-war economic planning in France privileged the restoration of industrial and commercial sites; rebuilding of housing by the state, by housing co-operatives and by individual property owners received less support and progressed far more slowly. Today, the visual legacy of reconstruction is easily confused with that of completely new post-war apartments; however its origin, if not its architecture, is distinctively different and merits recognition in its own right.     

基于注塑件收缩率预测的模具型腔尺寸生成方法研究

针对注射模具CAD/CAM系统普遍采用平均收缩率来计算模具型腔尺寸所存在的不足，提出基于注塑件的收缩率预测结果生成模具成型尺寸的方法，并给出注塑件尺寸与模具成型尺寸之间的换算方法。最后通过反求工程中的曲面重构技术完成模具型腔表面的造型。     

带有长测量电缆的电容分压器的传输特性

该文研究了z_3=z_0,z_4=∞情况下电容分压器测量系统的传输特性,得出了U_(in)(s)=G(s)~(-1)U_0(s)在时间域的解析解及其差分形式,此解正可用于进行波形重建。给出了波形畸变与分压器、电缆及被测波形参数间的定量关系。