离子膜烧碱扩建中高低压配电系统的改造

介绍了在新增1万t／a离子膜烧碱扩建工程中的高低压配电系统的改造方法低压配电系统可以实现自动联络，能最大限度地满足工艺要求。     

智能化建筑的广播音响系统原理及系统集成设计

本根据相关的火灾自动报警系统设计规范，就智能化建筑的广播音响系统的设计及其工作原理、如何集成背景音乐和紧急广播这两个系统，提出了一种方案，以供探讨。     

LIGA工艺在工程中的两类应用

本文从LIGA工艺的工程应用角度，简要介绍微小型安全密码锁机构、微小型加速开关结构的基本设计问题和工艺问题，初步分析了这两类组件制造对LIGA工艺的需求与要求。     

新型强功率毫微秒脉冲源—光导开关的研制

本文概述强功率毫微秒脉冲源在军事方面的意义,并报导一项重掺杂硅光导开关的研制成果:在直流偏置条件下50Ω负载上获得脉宽为10ns,1kV的脉冲输出。     

单通道液压开关及其应用

通过对液压换向同的开关特性分析，提出了单通道液压开关这一新概念．这一种新概念指出，液压开关控制的实质是以单通道液压开关为基本元件的逻辑控制．并据此建立了各种换向阀的单通道液压开关模型．     

CM303双二选一模拟开关电路

本文主要介绍CM303双二选一模拟开关电路的基本结构,包括从电路的版图设计、工艺设计原则,以及采用埋层外延技术,本电路以实现消除闭锁现象为目的。给出了制造工艺条件对外延材料的选择关系,最后给出了电路的性能指标。     

A Fully Integrated Current-Steering 10-b CMOS D/A Converter with a Self-Calibrated Current Bias Circuit

A fully integrated current-steering 10-b CMOS Digital-to-Analog Converter with internal termination resistors is presented. In order to improve the device-mismatching problem of internal termination resistors, a self-calibrated current bias circuit is designed. With the self-calibrated current bias circuit, the gain error of the output voltage swing is reduced within 0.5%. For the purpose of reducing glitch noises, further, a novel current switch based on a deglitching circuit is proposed. The prototype circuit has been fabricated with a 3 V 0.35 μm 2-poly 3-metal CMOS technology, and it occupies 1350 × 750 μm silicon area with 45 mW power consumption. The measured INL and DNL are within 0.5 LSB, respectively. The measured SFDR is about 65 dB, when an input signal is about 8 MHz at 100 MHz clock frequency.     

基于开关状态组合的直流接地故障检测方法

提出了一种高精度检测电力系统直流接地电阻的新方法,利用两个可控开关,控制产生3种有效电路状态,利用3种状态下的电量关系,无须高精度电流、电压传感器,只使用一个模拟输入通道和几个廉价的电阻元件,即可实现直流接地电阻的低成本、高精度检测,克服了使用非线性检测元件造成的每台仪器必须单独编程、元件不能互换、仪器维护困难、难以批量生产等问题,进一步提高了检测精度,大大简化了生产过程。基于新检测方法的直流接地故障检测仪,具有对直流系统无任何不良影响、检测结果不受分布电容的影响、检测电路简单、检测精度高、仪器一致性好、价格低廉等显著优点。     

The optical crossbar switch for signal routeing on board communication satellites

A switch matrix operating on baseband or microwave signals is a critical element of communications satellites employing multiple beam antennas and on-board switching. Optical switching by spatial light modulators (SLMs) offers a means of implementing large and highly flexible switch arrays capable of routeing signals at baseband or microwave frequencies. This approach offers potential mass, power and size advantages compared to alternative technologies. The paper reviews the essential features of optical crossbar switch architectures based on SLMs and discusses options for the lasers, SLMs, interface optics and photodetectors. Proof-of-concept demonstrators for optical crossbar switches operating on both baseband and microwave signals are described. Finally, an outline design for a compact switch module is described and the critical component developments needed to realize this are identified.     

蜂房分组交换移动通信网的网络结构

本文给出以光纤城域网为基础的蜂房分组交换移动通信网的原理和网络结构，并给出该网络的容量和能支持的移动用户数。