Pyrolysed carbon supported cobalt porphyrin: a potent catalyst for oxidation of hydrogen sulfide

Pyrolysed carbon supported cobalt porphyrin, an electrocatalyst that is frequently used for oxygen reduction in fuel cells, is evaluated for catalytic oxidation of hydrogen sulfide by dissolved dioxygen. The catalyst performs best after heat treatment at 880 °C_, at pH 8. Analysis of the reaction products reveals that sulfur is the dominant product throughout the investigated pH range 5–10. The catalyst performs much better than powdered activated carbon, granular activated carbon and different other forms of unmodified carbon catalysts. This is as far as we know the first time that heat treated cobalt porphyrins are evaluated for non-electrocatalytic applications.     

Partial oxidation of ethane to synthesis gas over Co-loaded catalysts

Attention has been increasingly paid to the partial oxidation of lower alkanes to synthesis gas, due to its intrinsic energy saving process. We studied the partial oxidation of ethane (POE) on Co loaded on various supports. The POE performance varied as follows: Y₂O₃, CeO₂, ZrO₂, La₂O₃  SiO₂, Al₂O₃, TiO₂ > MgO. Comparing Y₂O₃ and CeO₂, the carbon deposition during the POE was negligible on CeO₂ and therefore CeO₂ was the most preferable support. By changing space velocity and O₂ partial pressure, reaction mechanism of POE was studied and it was revealed that two-step mechanism was prevailing; combustion of ethane to H₂O and CO₂ and subsequent reforming of ethane with H₂O and CO₂ to synthesis gas. Co/CeO₂ catalyst exhibited high and stable catalytic activity for 10 h; high ethane conversion of 18% (maximum ethane conversion 20% at O₂/C₂H₆ = 0.2) with H₂ and CO selectivities of 93 and 84%, respectively.     

环烷酸钴的制备

论述了以金属钴和环烷酸为原料合成环烷酸钴的工艺，考察了氯化钴合成工艺和处理工艺，氯化钴浓度，环烷酸酸值，碱浓度对环烷酸钴钴含量的影响，合成的氯化钴经处理达到国家标准要求，合成的氯化钴不经处理可直接用于合成环烷酸钴，产品环烷酸钴达到技术指标要求。     

Modeling of solid—liquid adsorption: Effects of adsorbent loads on model parameters

The adsorption of cobalt phthalocyanine dye onto activated carbon in a continuous stirred tank adsorber was studied. The variables investigated were: adsorbent mass, adsorbent particle size and fluid flowrate. Several models based on film, pore and surface diffusion were constructed and fitted to the experimental data. Experimental results showed: (i) the increasing importance of the film mass transfer resistance for increasing adsorbent loads; (ii) the increasing importance of the surface diffusion mechanism for increasing adsorbent loads; and (iii) the better discrimination among different models for higher adsorbent loads and lower flowrate.     

Self-assembled monolayers of a disulphide-derivatised cobalt-porphyrin on gold

A self-assembled monolayer (SAM) of a novel cobalt(II)porphyrin disulphide derivative was prepared on flat gold(1 1 1) electrode. Evidence for surface modification was provided by electrochemical reductive desorption of the monolayer and ellipsometry, consistent with a coverage of 2.5 × 10⁻¹⁰ mol cm⁻² and a thickness of 13 Å, respectively. Both results support the presence of SAMs where the molecules share an intermediate position between perpendicular and flat orientation. Scanning tunnelling microscopy have also proven the formation of CoPSS SAMs, however high-resolution images could only be obtained when the CoPSS molecules were diluted in an hexanethiol SAM. The electrocatalytic activity of the surface confined Co-porphyrin was evaluated for the oxygen reduction. Voltammetric data indicate that reaction involves two electrons consistent with the formation of hydrogen peroxide. Under similar experimental conditions the data obtained for an iron-porphyrin analogue points for a full reduction of dioxygen to water.     

Preparation and structural characterization of Co/Al2O3 catalysts for the ozonation of pyruvic acid

A series of Co/Al₂O₃ catalysts were prepared by the incipient wetness impregnation method using γ-Al₂O₃ support and (CH₃COO)₂Co·4H₂O solutions, followed by calcination at 500–800 °C. Characterization of catalysts was accomplished by several techniques such as thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), physisorption of nitrogen, mercury and helium-based pycnometries, Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and pH of zero charge (PZC). Impregnation of support produced a moderate decrease of its surface area and pore volume and also led to minor changes of its PZC. Depending on preparation conditions (i.e., calcination atmosphere and temperature and metal loading), one or more of the following Co-containing compounds were identified: CoO, Co₃O₄ and CoAl₂O₄. The support and prepared Co/Al₂O₃ catalysts were tested to catalyze the ozonation of aqueous pyruvic acid at pH 2.5. Pyruvic acid was shown refractory towards single ozonation but the use of γ-Al₂O₃ and Co/Al₂O₃ catalysts resulted in 56–96% pyruvic acid conversion and 41–78% decrease in DOC after 2 h of ozonation of phosphate-buffered solutions. In the absence of the buffer, conversion rate was enhanced likely as a result of pH increase during the course of the process thus giving rise to the indirect way of ozonation through hydroxyl radicals. Acetic acid was found as the main by-product of pyruvic acid ozonation. Depending on the catalyst used, yield of acetic acid varied from 32 to 49%, values noticeably lower that that obtained from the control non-catalytic ozonation experiment (73%). Differences in catalytic activity amongst the various Co/Al₂O₃ catalysts investigated were attributed to the different Co active phases deposited on the γ-Al₂O₃ surface. The following sequence of increasing activity can be inferred from experimental results: CoO, CoAl₂O₄ and Co₃O₄. All the Co/Al₂O₃ catalysts prepared showed good stability as the percentage of cobalt leached out was rather low.     

近红外敏感的功能分离型有机光接受体系的光导性能研究Ⅱ．CGL／CTL界面能级匹配对体系光导性能的影响

功能分离型光接受体系是由载流子产生层（ＣＧＬ），载流子传输层（ＣＴＬ）和载流子阻挡层（ＵＣｔ）组Ａ成的一种多层光接受体系．本文合成了一系列载流子传输层材料，如吡唑啉、唑和腙的衍生物，并将上述ＣＴＬ材料与酞菁类ＣＧＬ材料，按一定涂布工艺制成近红外敏感（７８０～８３０ｎｍ）的多层光接受体系．通过对样品电照相性能的表征，着重讨论了ＣＧＬｌＣＴＬ界面能级匹配问题及其对体系光导性能的影响。     

Homogeneous Catalyzed Ozone Decomposition in the Presence of Co(II).

The homogeneous decomposition of ozone in the presence of a Co(II) catalyst has been investigated in aqueous solution. Under the conditions investigated (Co(II) concentration: 0.0 – 2.0?ppm, pH: 1.6- 8.4, O₃ concentration: 5 10^?5 – 2.0 10⁴?M) the process can be assumed to follow pseudo first order kinetics with respect to ozone. Cobalt concentration dependency also obeys first order kinetics although it may be considered to reach a steady state concentration. pH exerts a positive influence on the decomposition rate from 1.6 to 7.1, the process leveling off at pH 8.4. An Arrhenius analysis of the temperature effect gave a moderate activation energy of the global reaction (E=10917?cal mol^?1). A more detailed radical mechanism than a simple pseudo first order reaction can be postulated for simulation purposes. By numerical optimization of some unknown kinetic constants the influence of several operating variables can be adequately predicted.     

The electrochemical behavior of cobalt phthalocyanine/platinum as methanol-resistant oxygen-reduction electrocatalysts for DMFC

The electrochemical behavior of cobalt phthalocyanine/platinum as methanol-resistant oxygen-reduction electrocatalyst for DMFC was investigated. Platinum was chemically deposited on the carbon-supported cobalt phthalocyanine (CoPc), and then it was heat-treated in high purity nitrogen at 300 °C, 635 °C and 980 °C. In order to evaluate the electrocatalytic behavior of CoPc-Pt/C, the PtCo/C and Pt/C as reference catalysts were employed. TGA, XRD, EDAX, XPS and electrochemical experiments were used to study the thermal stability, crystal structure, physical characterization and electrochemical behavior of these catalysts. These catalysts exhibited similar electrocatalytic activity for oxygen reaction in 0.5 M H₂SO₄ solution. In methanol tolerance experiments, Pt/C, PtCo/C and CoPc-Pt/C heated at 980 °C were active for the methanol oxidation reaction (MOR). The presence of Co did not improve resistance to methanol poisoning. However, the CoPc-Pt/C after 300 °C or 635 °C heat-treatment demonstrated significant inactivity for MOR, hence they have a good ability to resist methanol poisoning. The current study indicated that the macrocyclic structure of phthalocyanine is the most important factor to improve the methanol tolerance of CoPc-Pt/C as the oxygen-reduction reaction (ORR) electrocatalyst. The CoPc-Pt based catalyst should be a good alternation for oxygen electro-reduction reaction in DMFC.     

磺化酞菁镓的二聚现象研究

采用分光光度法研究了磺化酞菁镓的二聚现象；测定了二聚常数Ｋｄ，讨论了ｐＨ值、离子强度、水、温度等因素对Ｋｄ的影响。研究结果表明：磺化酞菁镓的二聚反应可表示成： ２ＳＰｃＧａＯＨ→（ＳＰｃＧａ）２Ｏ＋Ｈ２Ｏ且磺化酞菁镓的二聚常数随着离子强度、磺酸基数目、水的浓度的增加而增加。