基于遗传神经网络的矿井通风机故障诊断研究

为了提高矿井通风机机械故障诊断的准确性,提出了一种基于遗传神经网络的矿井通风机故障诊断模型。利用BP神经网络的自学习、自适应、强容错性,并通过遗传算法优化BP神经网络的连接权重和阈值。弱化了故障诊断中的人为因素,提高了评价结果的准确性和权威性。仿真结果表明,该诊断方法具有准确度高、诊断速度快等优点,是一种实用的故障诊断方法。     

汽轮发电机组轴系突发性振动的消除

该文通过某电厂一台１５ＭＷ 汽轮发电机组轴系异常振动的测试分析,找到振动异常原因,指出由于轴系联轴节的不对中,导致轴瓦负荷减轻,轴瓦发生油膜涡动。当机组轴系重新找正后,机组振动恢复正常。     

Optimal allocation for estimating the mean of a bivariate polynomial

Suppose we wish to estimate the mean of some polynomial function of random variables from two independent Bernoulli populations, the parameters of which. rhemselves, are modeled as independent beta random variables. It. is assumed that the t.otal sample size for the experiment is fixed, but that the number of experimental units observed from each population may be random. This problem arises, ior example, when estimating the fault tolerance of a system by testing its compomentc individually. Using a decision theorebic approach, we seek to minimize the Bayes risk that arises from using a squared error loss function The Bayes estimator can lw detrmined in a straightforwardmanner, so the problem of optimal estimation rcduces. therefore, to a problem of optimallocatton of the samples between the two populatiorls. This can be solved via dynamic programming. Similar programming techniques are utilized to evaluate properties of a number of ad hoc allocation strategies that might also be collsidered for use in this problem.Two sample polynomials are analyzed along with a number of examples indicating the effects of different prior parameter settings. The effects of differences between prior pararueters used in the design and analysis stages of the experiment are also examined. For the polynomials considered, the adaptive strategies are found to be especially robust. We discuss computational techniques that facilitate such analyses by permitting rapid re-evaluation of strategies. Capabilities of this sort enrouragepeople to explorr designs more fully and to consider them from a number of different viewpuillts.     

卷绕控制总线的维护及改善

介绍了卷绕控制总线的框架,针对卷绕控制总线的通讯故障,对各种干扰因素和不合理项进行了治理。     

SA/CL-1-EP型阀门定位器的在线更换与思考

针对PV1021A阀门定位器SA/CL-1-EP更换过程中出现的问题,改变分析问题的思路,使故障得以处理,并总结了处理过程的经验教训。     

图像目标类别检测综述

随着移动设备与社交网络的迅速发展,数字图像的数据规模急剧增加,图像目标类别检测已经发展成为目前计算机视觉领域内的一个研究热点。对图像目标类别检测的关键问题进行了综述。首先对目标类别检测的研究背景进行了介绍;然后对目标类别检测技术进行了综述,其中包括外观模型、分类器和定位策略3个核心技术,以及数据集和评价标准;最后列出了目前目标类别检测算法的测试结果,并总结了目标类别检测的主要研究难点和发展方向。     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

分层多管理者网络故障监控策略

为了降低实时监控而增加的网络管理负担,提出一种分层多管理者网络故障监控策略．应用多代理马尔可夫决策过程,建立了一种新的多管理者网络故障监控机制,并给出了该机制下基于强化学习的轮询策略．采用这种基于多管理者的马尔可夫决策过程的分层网络故障管理技术,缩短了轮询次数,并能准确地发现网络故障,同时减少网络管理的信息开销．     

Complexity measures for assembly language programs

This paper presents the results of a study of the software complexity characteristics of a large real-time signal processing system for which there is a 6-yr maintenance history. The objective of the study was to compare values generated by software metrics to the maintenance history in order to determine which software complexity metrics would be most useful for estimating maintenance effort. The metrics that were analyzed were program size measures, software science measures, and control flow measures. During the course of the study two new software metrics were defined. The new metrics, maximum knot depth and knots per jump ratio, are both extensions of the knot count metric. When comparing the metrics to the maintenance data the control flow measures showed the strongest positive correlation.