2，6-萘二甲酸二甲酯在有机溶剂中溶解度的测定与关联

Solubility of dimethyl-2,6-naphthalene dicarboxylate in acetic acid, N,N-dimethylfonnamide, N,N-dimethyl acetamide, dimethyl sulphoxide, and N-methyl-2-ketopyrrolidine were determined using a dynamic method. The measured systems were correlated by UNIFAC group contribution method. A new main group （aromatic ester, ACCOO） was defined to express the activity coefficients of the aromatic ester. New interaction parameters of the ACCOO group were expressed as the first-order function of temperature and were determined from the experimental data. The calculated results for the new interaction parameters were satisfactory. The measured systems were also correlated with the Wilson and 2-h models, and the results were compared with those of the UNIFAC model.     

浅谈小型局域网的组建与应用

随着计算机应用技术与通讯技术的发展以及在实践中的广泛应用,智能化和网络化成为必然趋势,局域网的应用可以营造一个现代化的高效、快捷、安全的环境,也可以使计算机以及其他硬件的功能得到充分的发挥。     

Periodic surface modeling for computer aided nano design

Current solid and surface modeling methods based on Euclidean geometry in traditional computer aided design are not efficient in constructing a large number of atoms and particles. In this paper, we propose a periodic surface model for computer aided nano design such that geometry of atoms and molecules can be constructed parametrically. At the molecular scale, periodicity of the model allows thousands of particles to be built efficiently. At the meso scale, inherent porosity of the model represents natural morphology of polymer and macromolecule. Surface and volume operations are defined to support crystal and molecular model creation with loci and foci periodic surfaces. The ultimate goal is to enable computer assisted material and system design at atomic, molecular, and meso scales.     

Simulation of macroscopic material behavior for uniaxial fiber-matrix composites, using a DAE-approach

The macroscopic deformation behavior of a fiber-reinforced aluminum-boron composite is investigated. Different periodic and random arrangements of the microstructure are considered with macroscopic hardening behavior due to the evolution of plastic zones on the microscale being taken into account.

For the solution of the initial boundary value problem, a non-standard algorithm is applied. It consists of the direct solution of the whole set of equations, treating all variables as global quantities. Together with a higher order time integration method (BDF2), an automatic step size control is used in the FEM calculations.     

Study on the Intelligent System of Gear Pitch Deviation Measurement and Analysis

The intelligent controlling and data process of pitch error measurement is proposed. The whole system takes C++ as the development tool and takes advantages of object-oriented and visualization, having the advantages of easy operation and humanistic interface. In the meanwhile, the system can be complemented and improved according to the demand of user, having certain independence. The research of the system provides an efficient and reliable way to measure and analyze the gear pitch, which can be referenced in the future research.     

基于BCM3540的高清晰度数字电视机顶盒的硬件设计

介绍一种基于BCM3540的高清晰度数字电视机顶盒的硬件设计方案,该方案采用1块主芯片BCM3540及1块协处理器BCM7411,能够处理MPEG-2高清、标清以及H.264高清、标清信号,可以直接支持PCMCIA接口实现机卡分离,并具有32位PCI总线,可以很方便地进行功能扩展。     

Evaluate the performance of a stochastic-flow network with cost attribute in terms of minimal cuts

This paper proposes a performance index to measure the quality level of a stochastic-flow network in which each node has a designated capacity, which will have different lower levels due to various partial and complete failures. The performance index is the probability that the maximum flow of the network equals the demand d without exceeding the budget b. A simple algorithm in terms of minimal cuts is first proposed to generate all upper boundary points for (d, b), and then the probability that the maximum flow is less than or equal to d can be calculated in terms of such points. The upper boundary point for (d, b) is a maximal vector representing the capacity of each arc such that the maximum flow of the network under the budget b is d. The performance index can be calculated by repeating the proposed algorithm to obtain all upper boundary point for (d−1, b). A benchmark example is shown to illustrate the solution procedure.     

现场总线技术的特点及其在热电站的应用

阐述了现场总线技术的含义、主要特点和优点,对比了现场总线控制系统与DCS系统的区别,介绍了现场总线技术在洛阳石化分公司热电站的典型应用及其发展前景。     

Simultaneous HPLC quantification of total cholesterol,tocopherols and β-carotene in Barrosã-PDO veal

A simple, rapid and sensitive procedure for the simultaneous determination of total cholesterol, tocopherols and β-carotene in meat is described. The method involves a direct saponification of the meat, a single n-hexane extraction and the analysis of the extracted compounds by normal-phase HPLC, using fluorescence (tocopherols) and UV–Vis photodiode array (cholesterol and β-carotene) detections in tandem. Rates of recovery of spiked meat samples were 93% for cholesterol, 83–86% for (α-, β- and -γ) tocopherols and 89% for β-carotene. Repeatabilities were high (CV < 6%) for all determined compounds, except for δ-tocopherol. This tocopherol, which is not usually present in meat, showed a much lower recovery percentage (73%) and repeatability (12.8%). This methodology was applied for the quantification of total cholesterol, tocopherols and β-carotene in three muscles (longissimus thoracis, longissimus lumborum and semitendinosus) of the Portuguese traditional Barrosã-PDO veal, obtained from autochthonous calves fed extensively during summer (with the least abundant green pastures) and slaughtered in early autumn (October). Barrosã-PDO veal showed median contents of total cholesterol (0.50–0.56 mg/g) and, depending on the analysed muscle, moderate to high contents of α-tocopherol (3.3–3.9 μg/g) and β-carotene (0.07–0.09 μg/g), suggesting an high sensorial and hygienic quality.     

Comparative study of the elimination of toluene vapours in twin biotrickling filters using two microorganisms Bacillus cereus S1 and S2

BACKGROUND: To investigate the microbial degradation performance of organic pollutants in the atmosphere using a biotrickling filter, two microorganism strains, Bacillus cereus S1 and Bacillus cereus S2, were selected, identified and inoculated into a twin biotrickling filter for comparison. RESULTS: Both strains showed good performance towards the degradation of model organic pollutants when gas flow rates ranged from 100 to 600 L h⁻¹. For S1, the total maximum removal efficiency (RE) of toluene was maintained nearly 100% not only at gas flow rates of 100 L h⁻¹ corresponding to empty bed residence time (EBRT) 199.44 s, but also at gas flow rates of 200 L h⁻¹ (EBRT = 99.72 s) and 300 L h⁻¹ (EBRT = 66.48 s). However, S2 had a much lower degradation capability; near 100% removal efficiency was obtained only at the gas flow rate of 100 L h⁻¹ although both bacteria belong to the same Bacillus cereus. With further increase in gas flow rate, the total REs for both S1 and S2 decreased slightly at first and then dropped sharply to 46% and 35%, respectively, at an EBRT of 33.24 s, corresponding to a gas flow rate of 600 L h⁻¹. Starvation for between 2 and 10 days resulted in the re‐acclimation times of both strains ranging between 1.0 and 15.5 h. CONCLUSION: Strain S1 would be a better choice for inoculation into a biotrickling filter than strain S2, because of its much higher toluene removal capacity and rapid recovery to full performance. Copyright © 2008 Society of Chemical Industry