后桥壳的可靠性优化设计

该文讨论了后桥壳的可靠性优化设计问题.在基本随机变量的概率特性已知的情况下,应用随机摄动法和约束随机方向法对后桥壳进行可靠性优化设计,并编制了实用的计算机程序,可以迅速准确地得到后桥壳的可靠性设计参数.     

Influence of load and speed on wear characteristics of grey cast iron in dry sliding — selection for minimum wear

The wear of grey cast iron in dry sliding conditions has been studied with the aims of (1) finding the influence of working conditions on the wear rate, and (2) determining the region of speed and load where low wear is accomplished. Grey cast iron with flake and nodular graphite was submitted to investigation using a pin-on-disc machine. The results indicate that the flake graphite cast iron is more suitable for applications at speeds greater than 4 m s⁻¹ and lower loads, while nodular cast iron has greater wear resistance at lower speeds in the range of loads investigated - from 50 N cm⁻² to 200 N cm⁻²     

活动式水冷撇渣器的设计及应用

活动式水冷撇渣器是根据高炉冷却壁的工作原理设计的。第一台活动式水冷撇渣器于１９９３年２月２７日在安钢４号高炉投入运行，使用寿命长达１７个月零１８天，通铁量达到４０万ｔ。这种活动式水冷撇渣器具有投产少，收益高，维修方便，安全可靠等优点。     

基于OTA的多功能电压模滤波器及其仿真

本文采用信号流图法设计了一种基于ＯＴＡ的三输入一输出多功能电压模滤波器新电路，该电路由五个ＯＴＡ和两个接地电容构成，合理选择输入电压可实现低通、高通、带通、带阻及全通滤波功能。文章还对电路进行了ＭＯＳ管级的计算机仿真，其结果表明所提出的电路方案正确有效。     

计算机辅助设计中浓淡曲线的设计

本文介绍利用Super Frame软件进行色彩浓淡设计的原理、方法和步骤。据此原理和方法,使用C语言设计开发出了应用实例——折线浓淡分布曲线。     

对高炉冷却壁设计参数的探讨

通过炉衬、冷却壁、炉壳等与炉内温度之间的传热计算，对冷却壁的设计参数进行了搪塞分析，并提出了推荐的冷却壁设计参数。     

凸轮进给式双管平头倒棱机

研制的凸轮进给式双管平头倒棱机可自动完成上料→夹紧→平头倒棱→松开→退料动作循环，同步准确，可靠性高，平头倒棱质量好。介绍了该装置的工作原理、工作程序、技术性能、设备组成以及刀具和夹具的特点。     

Planning the GMAW process by constraint propagation

Although the gas metal arc welding (GMAW) process is widely used for joining metals, its planning is still a cumbersome task. The planning procedure involves many complex interrelationships among the process variables and depends heavily on empirical knowledge. Therefore, a solution method that allows a convenient way to represent the domain knowledge and evaluate the process variable relationships is needed. Further, the lack of a strong domain theory to quantify these interrelationships is a deficiency in the planning of the GMAW process. This paper presents a solution method that overcomes this deficiency and introduces a convenient knowledge representation scheme. The solution method considers the planning procedure to be a constraint satisfaction problem (CSP). The AC-4 algorithm is used to obtain arc consistency among nodes in the constraint network and the PC-4 algorithm is applied to obtain path consistency in the network. A modified version of the AC-4 algorithm is developed to reduce the search space and correspondingly reduce the computation time. An example is presented to demonstrate the capability of the method and its potential to reduce lead time.     

反击式粉碎机除尘装置的设计与改造

通过对反击式粉碎机粉尘产生的原因进行分析,引入非均相物系重力沉降分离原理,设计了大同煤预粉碎工程的除尘装置,取得了良好的使用效果.