A novel technique to prepare LiNbO3 at low temperature

Fresh niobium hydroxide was first precipitated from NbF₅ solution using an aqueous ammonium hydroxide under basic conditions. Then a simple procedure of mixing lithium and niobium hydroxides together and heating at a low temperature (400 °C) produced pure ultrafine single phase LiNbO₃ (LN). In the literature, this is the lowest temperature so far reported on the formation of LN. The phase content and lattice parameters are determined by X-ray diffraction (XRD). The average particle size and morphology were studied by transmission electron microscopy (TEM).     

Ion implantation effect on atomic structure of deformed Si, Ir, W, Ni and Cu

It has been revealed, that in Ir subjected to severe plastic deformation, an ultrafine grained structure (UFG) is formed (the grain size of 20-30 nm). Practically no defects have been detected within the grains, while, in the case of Ar⁺ implantation, the subgrain structure with characteristic sizes of about 3-5 nm is formed; defects have been detected within subgrains.The subgrain structure was also revealed in UFG Ni and Cu after severe plastic deformation (SPD) (subgrain size of 3-15 nm), but in the latter case the observed boundary region is broader and subgrain is highly disoriented.     

Structure modification of rapidly solidified Al-11 wt% Si alloy by the addition of 2 wt% Fe

An investigation of the structure formation of as-cast Al-11 wt% Si (AlSi11) and Al-11 wt% Si-2 wt% Fe (AlSi11Fe2) rapidly solidified (RS) ribbons is performed. Ribbon samples are examined in detail using Auger electron spectroscopy (AES) and transmission electron microscopy (TEM). A nanoscale thickness layer of Si-precipitations, at both Al-grains boundary and oxide/Al-matrix interface, is found to be characteristic for “pure” AlSi11 ribbons. For Fe-doped ribbons, this layer comprises Fe-containing phase also, which appears to possess amorphous nature and is situated between the Si-grains and Al-matrix. A possible mechanism of altering the thermally activated volume diffusion of elements, due to the effect of Fe on the structure modification, is speculated based on the obtained results.     

Use of a neural network to link AFM etch patterns to plasma parameters

Plasmas play a critical role in depositing thin films or etching fine patterns while manufacturing integrated circuits. A new model for plasma diagnosis is presented. This was accomplished by linking atomic force microscopy (AFM) to plasma parameters using a neural network. Experimental AFM data were collected during the etching of silicon oxynitride films in C₂F₆ inductively coupled plasma. Surface roughness of etched patterns was characterized by means of discrete wavelet transformation. This led to the construction of three vertical (type I), diagonal (type II), and horizontal (type III) wavelet coefficient-based models. The performance of diagnosis models was evaluated in terms of the prediction and recognition accuracies. Both accuracies were optimized as a function of the number of hidden neurons. Comparisons revealed that the type I model yielded the largest recognition and the smallest prediction error. This was demonstrated even under stricter monitoring conditions. More improved diagnosis is expected by enhancing AFM resolution.     

Non-linear current–voltage characteristics related to native defects in SrTiO3 and ZnO bicrystals

SrTiO₃ and ZnO bicrystals with various types of boundaries were fabricated in order to examine their current–voltage characteristics across single grain boundaries. Their grain boundary structures were also investigated by high-resolution transmission electron microscopy. In Nb-doped SrTiO₃, electron transport behaviors depend on the type of boundaries. Random type boundaries exhibit highly non-linear current–voltage characteristics, while low angle boundaries show a slight non-linearity. On the contrary, undoped ZnO does not exhibit non-linear current–voltage characteristics in any type of boundaries including random ones. It is suggested that the differences observed in current–voltage properties between the two systems are mainly due to the difference in the accumulation behavior of acceptor-like native defects at grain boundaries. A clear non-linearity is obtained by means of Co-doping even for the highly coherent Σ1 boundary in a ZnO bicrystal. This is considered to result from the production of acceptor-like native defects by Co-doping.     

基于SPM技术的纳米信息存储薄膜的研究进展

扫描探针显微技术SPM可以在原子或分子尺度上对表面进行表征和修饰，应用SPM技术可以在薄膜表面形成纳米级的信息点阵，特别适合发展超高密度的信息存储，是一种非常有希望代替传统磁存储，光存储的纳米级存储技术，本文介绍了纳米信息存储薄膜的研究进展，并对其制备技术和读写机制进行了初步的探讨。     

A study of the large strain deformation and failure behaviour of mixed biopolymer gels via in situ ESEM

A mixed biopolymer gel, consisting of a protein (gelatin) and polysaccharide (maltodextrin) mixture has been investigated. By controlling the composition it was possible to construct an ‘emulsion-like’ structure, with included spherical particles of one phase (maltodextrin) within a continuous matrix of the second (gelatin). Large strain deformation and failure behaviour of this system has been examined via in situ environmental scanning electron microscopy (ESEM). ESEM has been employed to explore the changes in the structure of the material, whilst allowing the sample to stay hydrated as it was subjected to tensile strain, thereby allowing simultaneous imaging and determination of stress-strain data of the native sample. Ductile behaviour was observed, which has been attributed to the stretching, tearing and fracture of gelatin ligaments and debonding at the interface between the maltodextrin particles and continuous gelatin matrix. Deformation and fracture of the maltodextrin particles during tensile testing was also observed. The interfacial fracture energy of the composite has been calculated following an elastomer composite-debonding model, although there are several limitations to this approach for the mixed gel. It was found in samples tested after different ageing times that the debonding stress and strain was decreasing with ageing leading to a lower interfacial fracture energy. Samples were also tested after successive loading cycles, which resulted in a mechanical strength decrease after each cycle.     

Combined PIXE and SEM study of the behaviour of trace elements in gel formed around implant coated with bioactive glass

Bioactive glasses are used as coating biomaterials to facilitate anchorage of metallic prostheses implanted into the body. The aim of this work is to study the behavior of gel formed in contact with alloys and BVA and BVH bioactive glasses implanted. Cylinders of metallic implants composed by Ti, Al and V, are coated with bioactive glass. Three sheep were implanted for different time length: 3, 6 and 12 months in the femoral epiphysis. Results obtained with particle induced X-ray emission and scanning electron microscopy show that BVA coating induces a better contact between the metallic implant and bone. On the other hand, BVH coating prevents corrosion from the metallic implant.     

Observation of atomic steps on CaCO3 crystal surface

By using scanning polarization force microscopy,the deliquescence process and the atomic steps on the cleavage surface of CaCO3 in air were studied in situ.Under an exposure to medium umidity(-57%),the sloiw step movement has been observed.     

Growth structure investigation of MgF2 and NdF3 films grown by molecular beam deposition on CaF2(111) substrates

The growth structure of MgF₂ and NdF₃ films grown on polished CaF₂(111) substrates deposited by molecular beam deposition has been investigated using transmission electron microscopy (TEM) of microfractographical and surface replications as well as cross-sectional TEM, atomic force microscopy, packing density, and absorption measurements. It has been shown that by taking advantage of ultrahigh vacuum environments and a special stratification property of MgF₂ and NdF₃ films, the preparation of nanocrystalline films of high packing density and low optical absorption is possible at a substrate temperature of 425 K.