The effect of additives on the thermal stability of poly(vinyl chloride)

The effect of a range of organic additives on the thermal stability of poly(vinyl chloride), both with and without a chloroparaffin extender, was studied using a number of experimental techniques. Of the additives used the best overall balance was provided by pentaerythritol, which increased stability when the extender was present and had no effect when it was absent. The congo red test emerged as the most suitable technique, being consistent and inexpensive and able to screen several additives simultaneously. Isothermal differential thermal analysis correlated with the congo red test but required more expensive equipment, was time-consuming and demanded good mixing of the poly(vinyl chloride) compound to give reproducible results. Thermogravimetry was not sufficiently sensitive and the heat stability test was the least useful of all.     

瓦楞纸板用抗水淀粉胶配方及性能研究

简要分析了玉米淀粉胶的组成及对其质量的影响，重点对粘合剂的防水性进行了研究，叙述了瓦楞纸板用抗水粘合剂的配制及工艺过程，并与常规方法制备的粘合剂进行了性能比较，测定了抗水时间，得出了瓦楞纸板用抗水粘合剂的最佳配制比例。     

基于HOP的可调光编码／解码器的研究

提出了一种基于全息光处理器的可调光编码/解码器的实现方案。全息光处理器可以在空间进行编/解码，每个通信网络单元可以采用任意速率的数字或模拟的调制信号，它非常适合于多媒体的通信网络环境，通过对全息光处理器的折射率大小和位置的控制，当一个输入光脉冲经过光处理器中具有特定折射率的空间位置后，便可在处理器的输出端口得到合适的输出信号。本文给出了这种基于全息光处理器的可调光编码/解码器的仿真实验，结果是可行的，与以前文献中提出的结构相比，减小了硬件实现的复杂性，降低了成本和功耗，便于集成。     

由呼出气中的氡浓度估计铀矿工体内~(225)Ra的负荷量

本文测量了某铀矿不同工种的56名矿工下矿井作业前的呼出气中的~(222)Rn浓度,并由此估算了他们体内的~(226)Ra 负荷量。按不同工种的人数加权,呼出气中的~(222)Rn 浓度平均值为34.1Bqm~(-3),体内~(226)Ra 负荷量的均值为1.95kBq。同时还对9名休息了2天的和2名离开井下作业3—4年的矿工以及12名来下过矿井的本矿工人呼出气中氡浓度进行了测量,由此估算出其体内~(226)Ra 负荷量的均值分别为1.11、0.94和0.17kBq。     

Helicoseir as Shape of a Rotating String (I): 2D Theory and Simulation Using ANCF

A physically simple but mathematically cumbersome problem of rotating heavy string with one fixed top point was studied. A nonlinear equation of its two-dimensional shapes of relative equilibrium was obtained and solved numerically. A linear case of small displacements was analyzed in terms of Bessel functions. The qualitative and quantitative behavior of the problem is discussed with the help of a bifurcation diagram. Dynamics of the two-dimensional model near the equilibrium positions were studied with the help of a simulation using the absolute nodal coordinate formulation (ANCF); the equilibriums were found to be instable. The reason for instability is explained using a variational principle. The outlines for further full three-dimensional analysis are briefly proposed in this paper, and the full derivation will be explained in the next paper.     

偏振模色散统计特性的研究

利用动态方程研究了偏振模色散矢量的统计特性 ,分别用统计系综和频率系综两种方法进行数值模拟。数值结果表明 ,统计系综和频率系综两种方法的结果一致。在大归一化距离条件下 ,均方根时延的平方随归一化距离线性变化 ;偏振模色散矢量的各个分量服从高斯分布 ,差分群时延服从麦克斯韦分布 ;偏振模色散矢量弥散于整个邦加球     

Calorimetric determination of the enthalpy change for the binding of methyl orange to poly(vinylpyrrolidone) in aqueous solution

Thermodynamic parameters have been determined for the interaction of methyl orange and poly(vinylpyrrolidone) in aqueous solutions containing tris, tris and hydrochloric acid, or water only. Enthalpy changes were determined by use of a flow microcalorimeter. Free energy changes were calculated from the results of equilbrium dialysis studies. The results are interpreted in terms of the behaviour of poly(vinylpyrrolidone) in these systems. Analysis of data shows that the hydrophobic interactions in the systems are in the order: tris > wateronly > tris-HC1.     

Mechanical properties of poly(ether-ether-ketone) for engineering applications

An outline of the characteristics of PEEK and the versatility of its compositional forms (micro and macro composites) are given to illustrate its wide potential for success in engineering applications. Although it is necessary to have particular tabulations of mechanical properties for engineering design, these are seldom available and consequently it is argued that an understanding of stiffness, toughness and strength properties are required to fully exploit available manufacturer's data and thus develop the full potential of PEEK and its composites. Stiffness characteristics are considered in terms of a modulus function which is dependent on time under load and temperature. In its composite forms, whether reinforced with short or continuous fibres, stiffness anistropy can be both considerable and complex, but some empirical ground-rules are apparent. For continuous fibre composites even in the form of complex lay-ups, it is also possible to attempt some stiffness prediction from certain pseudo-elastic constants. Toughness of PEEK and its composites is described in terms of both comparative and intrinsic properties. Instrumented falling weight impact data, particularly as a function of temperature enable some insight into ductile-brittle transitions for the unreinforced material, but crack initiation and crack propagation processes for the various fibre reinforced forms. Intrinsic toughness is described in terms of linear elastic fracture mechanics theory. Strength properties are described for static and dynamic loading configurations. In particular, PEEK and its composites are evaluated for increasing test severities for strength characteristics; stress concentration, loading form and test temperature are considered.     

Thermal degradation of cinnamoylated poly(vinyl alcohol)

Thermogravimetry and pyrolysis in combination with gas chromatography and infrared spectroscopy were the experimental techniques applied to the thermal degradation of cinnamoylated poly(vinyl alcohol) samples, constituted from vinyl alcohol-vinyl cinnamate photocrosslinkable copolymers. The thermal decomposition products include gases, liquids and solids. The gases are formed from saturated and unsaturated volatile hydrocarbons C₁? C₄, carbon monoxide and carbon dioxide. The liquid fraction includes aromatic hydrocarbons and some oxygenated organic compounds. The solid product identified in the greatest amount was cinnamic acid. The content in the thermal decomposition products varies considerably both with copolymer composition and temperature.