Thermal activation approaches to deformation mechanisms for high Nb containing TiAl base alloys

The deformation mechanisms in a wide temperature rnage from room temperature to 1200K were investigated by thermal activation approach.Using observed instantaneous stress response to the strain rate jump (Δσtr),the activation volume Vs,then the activation enthalpy ΔH,activation free enthalpy ΔG and activation entropy ΔS were calculated.The apparent activation energy of high temperature deformation is estimated to be 3.66eV,which is larger than the self-diffusion coefficient of binary TiAl(3.01eV).The dislocations at 1173K are generally curved or bowed,even helical-shaped dislocations.The climb of ordinary dislocations as well as twinning has grealty contributed to the plastic deformation.The CRSS at 1173K is estimated to be 180MPa.The higher resisting stress at both room temperature and elevated temperature might relate to the high Nb content of the alloy.     

一种新的变轴数控机床标定方法

本文论述了国内外并联数控机床所采用的标定方法，选择了序列法进行了标定试验。但在实际标定过程中，出现了部分数据误差较大的问题，本文针对所面临的问题，提出了数值逼近法，并应用到实际机床的标定中，获得了机床的相关参数。之后，通过数学模型的计算值和实际测量值对比，验证了数据的可靠性，从而验证了方法的可行性和正确性。     

Prediction of particle motion in a two-dimensional bubbling fluidized bed using discrete hard-sphere model

The solids motion in a gas-solid fluidized bed was investigated using a discrete hard-sphere model. Detailed collision between particles and a nearest list method are presented. The turbulent viscosity of gas phase was predicted by subgrid scale (SGS) model. The interaction between gas and particles phases was governed by Newton's third law. The distributions of concentration, velocity and granular temperature of particles are obtained. The radial distribution function is calculated from the simulated spatio-temporal particle distribution. The normal and shear stresses of particles are predicted from the simulated instantaneous particle velocity. The pressure and viscosity of particles are obtained from both the kinetic theory of granular flow and the calculated stresses of particles. For elastic particles the individual lateral and vertical particle velocity distribution functions are isotropic and Maxwellian. The observed anisotropy becomes more pronounced with increasing degree of inelasticity of the particles.     

Developing human factors/ergonomics as a design discipline

This paper deals with internal challenges that the human factors/ergonomics (HFE) research faces when wishing to strengthen its contribution to development of work systems. Three established characteristics of high-quality HFE, i.e., HFE takes a systems approach, HFE is design-driven, and HFE focuses on two closely related outcomes, performance and well-being, are taken as a starting point of a methodological discussion, in which conceptual innovations, e.g. adopting the technology-in-use perspective, are proposed to support development of HFE towards the high-quality aims. The feasibility of the proposed conceptual choices is demonstrated by introducing a naturalistic HFE analysis approach including four HFE functions. The gained experience of the use of this approach in a number of complex work domains allows the conclusion that becoming design-driven appears as that most difficult quality target for HFE to reach. Creating an own design discipline identity in a multi-voiced collaboration is the key internal challenge for human factors/ergonomics.     

射线探伤中环焊缝一次透照长度计算的探讨

通过对一次透照长度概念的分析以及对环焊缝内透偏心法(F相似文献   

Robust and stable flow shop scheduling with unexpected arrivals of new jobs and uncertain processing times

In real scheduling problems, some disruptions and unexpected events may occur. These disruptions cause the initial schedule to quickly become infeasible and non-optimal. In this situation, an appropriate rescheduling method should be used. In this paper, a new approach has been proposed to achieve stable and robust schedule despite uncertain processing times and unexpected arrivals of new jobs. This approach is a proactive–reactive method which uses a two-step procedure. In the first step an initial robust solution is produced proactively against uncertain processing times using robust optimization approach. This initial robust solution is more insensitive against the fluctuations of processing times in future. In the next step, when an unexpected disruption occurs, an appropriate reactive method is adopted to deal with this unexpected event. In fact, in the second step, the reactive approach determines the best modified sequence after any unexpected disruption based on the classical objective and performance measures. The robustness measure is implemented in the reactive approach to increase the performance of the real schedule after disruption. Computational results indicate that this method produces better solutions in comparison with four classical heuristic approaches according to effectiveness and performance of solutions.     

电力系统一二次调频的反馈微分博弈协同控制

风能等间歇式能源并网将是未来电网发展趋势,其输出功率的波动将加剧一二次调频之间的冲突反调问题.本文将反馈微分博弈应用于电力系统频率控制中,建立起一二次调频的协同控制模型,并考虑调速器死区、控制动作幅值限制、机组爬坡速率约束等工程实际因素,用协同进化算法求得该模型的反馈纳什均衡解.用仿真验证了该方法在满足各种工程因素下有效解决一二次调频的冲突反调问题,充分挖掘了系统蕴藏的调频能力.     

微小型无人直升机建模与姿态控制

建立了微小型无人直升机数学模型,并采用误差预报法进行参数辨识,获得了较高精度的数学模型。应用H_∞回路成形鲁棒控制方法设计了微小型无人直升机姿态控制器,并进行了频域分析,开环控制系统的成型效果良好。在模型浮动20%条件下进行仿真,结果表明控制系统具有较强的鲁棒性。飞行试验获得了良好的控制效果,验证了建模与控制器设计方法的可行性和有效性。     

吐温—20增稳浊度法快速测定水泥中三氧化硫

本文研究了一种以非离子表面活性剂吐温－20为介质，硫酸钡浊度法侧定水泥中三氧化硫的新方法。吐温-20的引入使硫酸钡颗粒分散均匀，体系稳定性提高。本文选420nm为测定波长，SO2-4含量在50～500μg／25ml范围内线性关系良好，可很好地适用于水泥样品的分析。     

定向结晶传递过程的分形研究述评

概述了研究定向结晶过程传递问题的分形方法，并对各类数学模型进行了分析，探讨了进一步研究的方向和途径。