Prediction of fatigue behaviour in stress-concentrators of arbitrary geometry

A new method is outlined which aims to predict high-cycle fatigue behavior of components which fail from stress-concentrators. This involves examination of the stress field in the vicinity of the stress-concentrator, and comparison with stress fields for cracks at known stress intensities. Methods which are currently used for simple notch geometries can thus be generalised, making the approach applicable to stress concentrators of any geometry. The method of prediction is shown to be stable, providing a solution of good accuracy when compared to analytical methods for standard specimen geometries. Favourable comparisons with experimental data have been achieved both for standard notches and for a corner geometry which represents a typical component case.     

Stress analysis with arbitrary body force by boundary element method

Linear stress analysis without body force can be easily carried out by means of the boundary element method. Some cases of linear stress analysis with body force can also be solved without the domain integral. However domain integrals are generally necessary to solve the linear stress problems with complicated body forces. This paper shows that the linear stress problems with complicated body forces can be solved approximately without the domain integral. In order to solve these problems, the domain is divided into small areas using contour lines of body force. In these areas, the distributions of body force are assumed approximately to satisfy the Laplace equation.     

Fracture mechanics global approach concepts applied to creep slow crack growth in a medium density polyethylene (MDPE)

Creep fracture by slow crack growth is studied in a medium density polyethylene at 60 °C and 80 °C. Whereas elastic-plastic fracture mechanics load parameters fail to provide a unique temperature-independent correlation, that of the fracture mechanics for creeping solids C^∗ is proved to be relevant since this parameter correlates very well with the time to failure. Correlation established on both full notched creep tensile and double edge notched tensile tests was validated on cracked gas-pipe samples tested under hydrostatic pressure, extending the use of time to failure versus C^∗ diagram to predict lifetime of engineering components.     

利用AutoCAD求解机构运动学和动力学问题

提出采用AutoCAD求解机构运动学和动力学问题,并结合实例给出了方法与步骤。 此求解法既有图解法简单明了的特点,又能满足了现代机械设计对运动分析和动力分析的高精度 的要求,具有较高的可靠性和实用性。     

硫对注入YSZ单晶的金属铂在退火过程中结晶的影响

秀卢瑟福背散射－沟道技术（ＲＢＳ－Ｃ）和Ｘ射线衍射技术（ＸＲＤ）研究了Ｐｔ和注入ＹＳＺ（Ｙ２Ｏ３稳定的ＺｒＯ２）后产生的损伤和退火过程中损伤的恢复及注入Ｐｔ的晶化，ＲＢＳ－Ｃ分析表明ＹＳＺ室温下的存在较强自退火效应，ＸＲＤ分析结果示出硫以铂的晶化产生很大影响。     

Thermodynamics-inspired inverse halftoning viamultiple halftone images

Based on an analogy between thermodynamics and Bayesian inference,inverse halftoning was formulated using multiple halftone images based on Bayesian inference using the maximizer of the posterior marginal(MPM) estimate.Applying Monte Carlo simulation to a set of snapshots of the Q-Ising model,it was demonstrated that optimal performance is achieved around the Bayes-optimal condition within statistical uncertainty and that the performance of the Bayes-optimal solution is superior to that of the maximum-a-posteriori(MAP) estimation which is a deterministic limit of the MPM estimate.These properties were qualitatively confirmed by the mean-field theory using an infinite-range model established in statistical mechanics.Additionally,a practical and useful method was constructed using the statistical mechanical iterative method via the Bethe approximation.Numerical simulations for a 256-grayscale standard image show that Bethe approximation works as good as the MPM estimation if the parameters are set appropriately.     

裂纹对石墨烯拉伸力学性能影响的数值仿真

为研究裂纹对石墨烯力学性能的影响,以锯齿型石墨烯为研究对象,基于分子动力学方法,采用Tersoff势函数分析裂纹长度对石墨烯拉伸力学性能的影响以及含有裂纹的石墨烯在不同应变率下的拉伸变形破坏过程.结果表明,裂纹长度的增加大大减小石墨烯的抗拉强度和抗拉应变,对弹性模量有一定影响;裂纹降低石墨烯的抗拉应变对应变率的敏感性,但对于含有裂纹的石墨烯,仍可以增大加载速率来提高石墨烯的抗拉性能.     

原发性高血压病靶器官损害的预测仿真研究

研究原发性高血压病靶器官损害准确预测问题,由于原发性高血压病靶器官损害的影响因子之间存在着高度冗余和非线性,导致传统方法预测准确率低,为提高预测精度,构建了一种改进的基因表达式编程算法的原发性高血压病靶器官损害预测模型,首先设计了适合靶器官损害预测的适应度函数,然后为克服早熟现象提出了以平均适应度形式自适应的改变重组算子概率和变异算子概率,通过数据训练得到靶器官损害的2年预测模型。采用对山东中医药大学第二附属医院原发性高血压病历史数据进行验证性仿真,结果表明,方法的预测精度更高,在原发性高血压病靶器官损害的预测中有着广泛的应用前景。     

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining was carried out to investigate microfracture, residual damage, and surface roughness associated with material removal and surface generation. Brittle versus plastic deformation was studied using Vickers indention and nano-indentation. To characterize the abrasive machining response, the 6H-SiC (0001) substrates were ground using diamond wheels with grit sizes of 25, 15 and 7 μm, and then polished with diamond suspensions of 3 and 0.05 μm. It is found that in indentation, there was a scale effect for brittle versus plastic deformation in 6H-SiC substrates. Also, in grinding, the scales of fracture and surface roughness of the substrates decreased with a decrease in diamond grit size. However, in polishing, a reduction in grit size of diamond suspensions gave no significant improvement in surface roughness. Furthermore, the results showed that fracture-free 6H-SiC (0001) surfaces were generated in polishing with the existence of the residual crystal defects, which were associated with the origin of defects in single crystal growth.     

长期高温服役的12%Cr耐热合金钢性能退化与恢复

X2 0CrMoV12 1耐热合金钢广泛应用于热电厂主蒸汽管线等主要部件。经长期高温负荷运行后 ,材料性能明显退化。观察显微组织发现 ,材料性能下降是和晶界碳化物的粗化密切相关的。文章着重研究了损伤材料重新热处理后的性能和组织结构的变化 ,初步探讨了材料长期服役后通过热处理恢复其原始性能的可能性