双料注射外角撑装饰板的浇口位置确定

以双料注射成型某轿车外角撑装饰板为例,综合考虑不同浇口位置组合对制件翘曲变形和界面结合力的影响,在Moldflow软件平台上,分析确定浇口位置的最佳组合.在评价界面结合强度时,采用界面区基体局部熔化层最大深度和熔化持续时间作为判断结合力的依据,这对于双料注射成型其它类似塑料件的界面结合强度判断具有一定借鉴意义.     

Modeling fire growth in a combustible corner

A fire growth model was developed to predict the flame spread and total heat release rate of a fire in a corner configuration with a combustible lining. Input data for the combustible lining were developed using small-scale test data from the ASTM E1354 cone calorimeter and ASTM E1321 LIFT. The fire growth model includes a flame spread model linked with a two zone compartment fire model, CFAST Version 3.1.2. At a user selected time interval, the flame spread model uses the gas temperature from CFAST to predict the heat release rate of the fire at that time interval, and then provides CFAST with a new heat release rate to predict conditions during the next time step. The flame spread model is an improved version of the flat wall flame spread model previously developed for the US Navy. The model is capable of predicting flame spread in a variety of configurations including a flat wall, a corner with a ceiling, flat wall with a ceiling, unconfined ceiling, and parallel walls. The model has been validated against ISO 9705 test data and was used in this study to simulate conditions that develop in three open corner tests each with a different lining material. The model was able to predict the heat release rate of the fire and provide a reasonable estimate of the flame fronts and flame lengths during the growing fire.     

基于角点特征和自适应核聚类算法的目标识别

提出了基于角点特征和自适应核聚类的目标识别方法,将有效性函数引入核聚类算法中,提出了一种可动态估计聚类数目的自适应核聚类算法。该方法用于飞机识别中,通过对飞机角点特征的自适应核聚类,完成定位识别。实验结果表明,该方法是有效的。     

一种基于小波变换的角点提取方法

提出一种新的基于小波变换的角点提取方法。它利用在几个尺度上小波变换模极大值和曲率理论提取角点。理论和试验结果表明 ,本算法对于角点的提取和定位都是有效的     

基于边缘相关性距离约束的角点匹配

在双目视觉技术中,针对物体边缘上的角点误匹配问题,提出了一种基于边缘相关性距离约束的角点匹配算法。该算法首先采用基于边缘的角点检测子来提取角点,通过极线约束和角点特征值约束来确定候选角点匹配集合;然后提出“边缘相关性”约束,基于角点距离构造候选角点对的贡献值来对其进行精匹配;最后构造角点特征向量,通过子向量匹配方法进一步对角点匹配对进行检验。实验结果表明,该匹配算法正确率高,有效地解决了边缘角点对的误匹配问题,非常适用于基于边缘曲线的双目视觉应用。     

微型双岛硅膜制作中的削角补偿方法研究

针对微型双岛硅膜制作中的凸角削角腐蚀问题，提出了一种新的削角补偿方法一“两端矩形补偿法”，并在感压膜尺寸仅为０．７２ｍｍ×１ｍｍ的双岛硅膜制作中获得成功。     

基于特征匹配的亚像素级全景图像配准算法

为了提高全景图全自动拼接中图像配准的速度和匹配稳健性,提出了一种基于相对距离法去除外点的亚像素级图像配准算法,并给出了分析和实验结果,亚像素级像素定位误差在0.01~0.1之内。在对12组图像匹配的实验结果表明,该匹配算法的匹配正确率达到100%,且匹配的时间小于目前通用的RANSAC匹配算法。