Effect of HCl pre-treatment on corrosion resistance of cerium-based conversion coatings on magnesium and magnesium alloys

The corrosion protection afforded by a cerium conversion coating, formed by immersion in a solution containing rare earth salt and hydrogen peroxide, on pure magnesium and two magnesium alloys, AZ91 and AM50, has been studied. The effect of HCl pre-treatments on the morphology and on the corrosion resistance of the cerium conversion layer was investigated. A thicker and more homogeneous distribution of the conversion coating was obtained when the sample surface was pre-treated with acid. Higher amounts of cerium on the surface of the pre-treated samples were detected. The cerium conversion coating increased the corrosion resistance of the alloys because it ennobled the corrosion potential and decreased both the anodic and cathodic current. The acid pre-treatment further increased the corrosion resistance of the coated alloys. After five days of immersion in chloride environment the untreated samples showed localized corrosion while the chemical conversion coated samples appeared unaffected.     

Electrochemical and analytical study of corrosion inhibition on carbon steel in HCl medium by 1,12-bis(1,2,4-triazolyl)dodecane

1,12-bis(1,2,4-triazolyl)dodecane (dTC12) is an excellent corrosion inhibitor for carbon steel in deaerated 1 M HCl solution. In this work electrochemical and analytical techniques were used to study the inhibition of corrosion on carbon steel in acidic medium. The carbon steel corrosion inhibition of dTC12 was attributed to the synergistic effect between chloride anion and quaternary ammonium ion. The protective efficiency of the film was higher than 90%, indicating that corrosion of carbon steel in 1 M HCl is reduced by dTC12.The effect of dissolved oxygen on the inhibition efficiency was also investigated. The results show that the inhibition efficiency increases in early stage and decreases for a long immersion time.     

耐腐蚀高压柱塞泵用新型双相不锈钢的研究

叙述了新型双相不锈钢－ＷＳＤ钢的组织及其耐蚀性能。试验结果表明，ＷＳＤ钢在氯化物介显示出优异耐蚀性能，其抗点蚀性能远超过Ｃｒ１３，１８－８Ｔｉ，３１６Ｌ等钢种，达到国外Ａｌ－６Ｘ，ＳＡＦ２２０５等钢种的水平。     

常减压蒸馏装置高温部位的腐蚀与防护

阐述了常减压蒸馏装置高温部位的腐蚀机理，介绍了高温防腐蚀的三种方法：正确选材、高温缓蚀剂技术及喷涂渗铝技术，建议在类似的石化装置推广使用。     

Effects of blending on surface characteristics of copper corrosion products in drinking water distribution systems

Copper scales formed over 6-months during exposure to ground, surface and saline waters were characterized by EDS, XRD and XPS. Scale color and hardness were light red-brown-black/hard for high alkalinity and blue-green/soft for high SO₄ or Cl waters. Cl was present in surface or saline copper scales. The Cu/Cu₂O ratio decreased with time indicating an e transfer copper corrosion mechanism. Cu₂O, CuO, and Cu(OH)₂ dominated the top 0.5-1 A° scale indicating continuous corrosion. Cu₂O oxidation to CuO increased with alkalinity, and depended on time and pH. Total copper release was predicted using a Cu(OH)₂ model.     

炼厂硫腐蚀的典型案例分析及解决措施

通过硫在不同温度与环境下对金属材料腐蚀的典型案例分析，简述其腐蚀机理与解决,工对今后炼厂高硫油加工提出进一步建议。     

尿素合成塔检测技术

综述了尿素合成塔在使用过程中可能出现的腐蚀和缺陷形态,并根据失效的可能性给出了有效的检测方法,包括宏观检查、厚度检测、磁粉检测、渗透检测、硬度检测、声发射检测、金相检查和金属磁记忆检测等技术.分别介绍了这些无损检测方法的特点,以及如何在尿素合成塔检验中进行实施.     

铁在盐酸中的缓蚀剂的两种作用类型的研究

通过腐蚀电位、极化曲线与交流阻抗测量研究了3种伯胺和丙炔醇对铁在盐酸中的缓蚀作用类型。结果表明,3种伯胺的缓蚀作用是几何覆盖效应,而丙炔醇的缓蚀作用则来自负催化效应。还证明,在强阳极极化的Tafel 直线区间,十二烷胺吸附在电极表面的覆盖率θ不随电位改变,十四烷胺的θ随电位的升高而增大。丙炔醇使铁阳极溶解反应活化能位垒增高的量.fa(θ)随电位升高而减小,其数值为df_a(θ)/dE=-73J·mol_-1.mV-1。     

单塔汽提水罐开裂原因分析及解决对策

单塔汽提装置原料水罐产生腐蚀裂纹的原因分析判断为低温HCN-H2S-H2O环境下的硫化物应力腐蚀开裂,根据腐蚀成因制定了合理的焊接补焊工艺;涂料防护施工的重点在于表面处理,喷砂后用面粘效果理想且节约施工时间,可延长涂层寿命。     

耐蚀钛合金的发展与应用

由于工业纯钛难于适应化工、采油等苛刻环境应用，促进了耐蚀钛合金的发展。本文对耐蚀钛合金的设计理论与试验作了分析，并对近期开发的耐蚀钛合金作了介绍，展望了耐蚀钛合金的应用。