POWER CONSUMPTION WITH ANCHOR MIXERS EFFECT OF BOTTOM CLEARANCE

The effect of bottom clearance on power draw for anchors is investigated. The results suggest that power input decreases as the bottom clearance ratio b/D increases. A new correlation is proposed in which both bottom and wall clearance effects on power input are considered. The dependence of power input on these effects is additive rather than multiplicative. Thus, the total power consumption is the sum of the power inputs generated by the wall and bottom clearance. Power results from 3D-CFD numerical simulations are also presented. These results confirm fairly well the experimental points.     

蛋白质在超滤过程中的膜污染和膜清洗

本文选用四种不同的膜清洗剂对牛血清蛋白溶液超滤后污染的三种超滤膜进行研究，结果表明：在蛋白质的等电点取得在不同ＰＨ值下蛋白质对膜污染的最佳清洗效果，清洗效率与蛋白质的所荷电荷有关。采用适宜的清洗过程将会延长膜使用寿命和增强超滤膜性能。     

金属闪光外墙乳胶漆的研制及性能研究

以丙烯酸酯及有机硅单体为原料合成了核-壳型硅丙乳液,用自制分散剂将闪光铝粉分散成水性闪光铝粉浆,并成功分散于硅丙乳液中,加入进口助剂,配制成水性金属闪光外墙乳胶漆.讨论了基料的玻璃化温度、单体的加入方式、引发剂、乳化剂、反应温度、聚合工艺和pH等对乳胶漆性能的影响.     

大庆30万吨乙烯装置开工锅炉的化学清洗

大庆石化总厂３０万吨乙烯进口开工锅炉，开车前必须进行化学清洗。针对进口锅炉清洗方案中所列药剂，其一购之既需要外汇；其二按之清洗后的排放液含有致癌物，对其处理也较困难。通过选用国产药剂，采用新的清洗方法及工艺，既达到了满意清洗效果，又避免了致癌物的污染，还为国家节省了外汇。     

Utility of stereoscopic displays for indirect-vision driving and robot teleoperation

The effectiveness of an active shutter-glasses stereoscopic display (SD) and a passive polarised SD was evaluated in a live robot-teleoperation task and a simulated indirect-vision driving task in various terrains. Overall, participants completed their tasks significantly faster with the SDs in three-dimensional (3D) mode than with the SDs in the baseline 2D mode. They also navigated more accurately with the SDs in 3D mode. When the effectiveness of the two types of SDs was examined separately, results showed that the active shutter-glasses SD resulted in faster responses and task completion times than the passive polarised SD, though most of the differences failed to reach statistical significance. Perceived workload when interacting with the two SD systems did not differ significantly between the active versus passive display types or between the 3D and 2D modes of operation; however, participants reported more severe discomfort after interacting with the passive polarised SD.     

尿素分解加热器清洗剂的研制和应用小结

针对一分加污垢的特点，通过实验，研制了以有机酸为主要成份的尿素分解加热器清洗剂及清洗工艺，并进行了４台次加热器的清洗，取得了较好的效果。此清洗方法具有工艺简单、安全、分析控制容易、费用低廉的特点。     

纳米TiO_2改性苯丙乳液内墙涂料的研究

采用物理掺和法,在苯丙乳液中加入锐钛型纳米TiO2,制成内墙涂料,进行抑菌试验和甲醛降解实验研究,分析了纳米TiO2的光催化原理和抗菌机理。结果表明,随着TiO2含量增加,甲醛降解能力和抗菌性能增强,当TiO2含量为4%时效果最好。     

VC生产工艺中螺旋板换热器的清洗

VC生产过程中,物料产生的污垢会降低螺旋板换热器的利用率,制约着整个生产线的产量。能过定性分析研究了合适的清洗剂,有效清除物料污垢。     

阳极氧化铝的表面参数对硅酮结构的装锒密封胶长期黏结性的影响(连载一)

硅酮密封胶对阳极氧化铝的黏结质量千差万别.影响黏结性的关键因素是铝材表面的封孔程度、氧化层的着色情况、清洁剂的特性以及基材表面清洁与打胶之间允许的时间间隔.由于清洁剂将有机污染物从阳极氧化铝表面去除的效果不同,所以此效果并不和黏结质量有必然联系.据猜测,吸附在阳极氧化铝表面的清洁溶剂会改善基材表面从而提高硅酮胶的黏结性,但这种改善效果会随着清洁溶剂随时间的的挥发而降低.对于给定的溶剂,最佳的黏结效果取决于材料表面的封孔程度.依照ISO 2143酸刻蚀方法测量材料表面的封孔程度,可以预测未着色的阳极氧化铝基材的黏结性.对于着色的阳极氧化铝表面,依照ISO 2931的测试标准,用电相位漂移方法可以用来预测黏结质量.一种控制阳极氧化铝表面的方法被提了出来,此方法是测量不同频率下基材的电阻抗并将它成功地和硅酮密封胶与该材料表面的长期黏接性联系起来.     

化学清洗中不容忽视的步骤——钝化

对低压锅炉化学清洗中容易被忽视的“钝化”这一步骤，从理论上进行了探讨，并介绍了相应的钝化工艺及防腐措施