全启发式教学法在“金属切削机床与刀具”课程中的应用

针对当代大学生的特点,阐述了来自于建构主义的全启发式教学方法的理论,对“金属切削机床与刀具”课程内容进行问题分解,采用以启发诱导、共同协作为核心的全启发式教学方法,对该课程的教学环节进行了合理的设计。     

智能井用管线切割工具设计

采用智能完井技术的油井,修井周期长,长年生产的井中积累较多的油垢、胶质等杂物,修井时起出管柱较为困难。在管柱起出遇卡时,常规的切割工具只能对油管进行切割,无法对井下工具的控制管线进行切割。设计了一种专用的管线切割工具。介绍了该工具的结构、工作原理、技术参数、施工工艺。分析了关键结构的强度。通过ANSYS软件对管线剪切模型进行有限元分析,结果表明管线切割工具可承受拉力达800 kN,可对6根不同尺寸多种组合的控制管线进行切割。进行下部管柱打捞过程中,不会有冗杂的管线阻碍打捞作业。     

Tool wear mechanism in turning of novel wear-resisting aluminum bronze

1　ＩＮＴＲＯＤＵＣＴＩＯＮＡｌｕｍｉｎｕｍｂｒｏｎｚｅｉｓａｎｉｍｐｏｒｔａｎｔｅｎｇｉｎｅｅｒｉｎｇｍａｔｅｒｉ ａｌｄｕｅｔｏｉｔｓｅｘｃｅｌｌｅｎｔｐｈｙｓｉｃａｌ ,ｍｅｃｈａｎｉｃａｌ,ａｎｔｉ ｃｏｒｒｏ ｓｉｏｎａｎｄｗｅａｒｒｅｓｉｓｔｉｎｇｐｒｏｐｅｒｔｉｅｓ .Ｏｕｒｒｅｓｅａｒｃｈｇｒｏｕｐｄｅ ｖｅｌｏｐｅｄａｓｐｅｃｉａｌｔｙｐｅｏｆｈｉｇｈｓｔｒｅｎｇｔｈ ,ｗｅａｒ ｒｅｓｉｓｔｉｎｇａ ｌｕｍｉｎｕｍｂｒｏｎｚｅ(ＫＫ ) ,ｗｈｉｃｈｉｓｅｘｃｅｐｔｉｏｎａｌｌｙｇｏｏｄｆｏｒ…     

Cutting forces modeling considering the effect of tool thermal property—application to CBN hard turning

Force modeling in metal cutting is important for a multitude of purposes, including thermal analysis, tool life estimation, chatter prediction, and tool condition monitoring. Numerous approaches have been proposed to model metal cutting forces with various degrees of success. In addition to the effect of workpiece materials, cutting parameters, and process configurations, cutting tool thermal properties can also contribute to the level of cutting forces. For example, a difference has been observed for cutting forces between the use of high and low CBN content tools under identical cutting conditions. Unfortunately, among documented approaches, the effect of tool thermal property on cutting forces has not been addressed systemically and analytically. To model the effect of tool thermal property on cutting forces, this study modifies Oxley’s predictive machining theory by analytically modeling the thermal behaviors of the primary and the secondary heat sources. Furthermore, to generalize the modeling approach, a modified Johnson–Cook equation is applied in the modified Oxley’s approach to represent the workpiece material property as a function of strain, strain rate, and temperature. The model prediction is compared to the published experimental process data of hard turning AISI H13 steel (52 HRc) using either low CBN content or high CBN content tools. The proposed model and finite element method (FEM) both predict lower thrust and tangential cutting forces and higher tool–chip interface temperature when the lower CBN content tool is used, but the model predicts a temperature higher than that of the FEM.     

不对称拉延零件成形工艺及模具设计

不对称拉延零件的加工，从工艺上考虑，应将其设计成能成对地进行拉延加工的对称结构，经过剖切保证产品最终尺寸要求。本文通过实例说明了确定不对称拉延零件合理工艺方案的重要性，同时介绍了模具结构特点及工作过程。     

Surface finish generated in hard turning of quenched alloy steel parts using conventional and wiper ceramic inserts

Significant progress has already been achieved in green manufacturing including dry and hard, often high-speed, machining technologies. For instance, the demand for higher productivity has resulted in the wider application of ceramic and PCBN tools with special multi-radii (wiper) geometry. This paper reports some important characteristics of the surface roughness produced in the turning of a hardened low-chromium alloy steel using mixed alumina–titanium carbon (TiC) ceramic cutting tools equipped with both conventional and wiper inserts. The characteristic geometrical features of surfaces obtained in both these turning operations have been assessed by means of representative two-dimensional (2D) surface roughness parameters, and some 3D visualizations, which allowed more complete characterization of the surface topography and prediction of its service properties. Results show that keeping equivalent feed rates, i.e. 0.1 mm/rev for conventional and 0.2 mm/rev for wiper tools, the surfaces obtained have similar 3D height roughness parameters, and comparable values of skew and kurtosis. At defined cutting parameters, surfaces produced by wiper tools contain blunt peaks with distinctly smaller slopes resulting in better bearing properties. Only marginal changes of Ra parameter were recorded during 15 min machining trials.     

机械零件刚度的模糊可靠性设计

介绍了机械零件刚度模糊可靠性设计变形分布参数和刚度隶属函数的确定,导出了零件刚度模糊可靠度的计算公式,并通过机床主轴模糊可靠性设计实例说明机械零件模糊可靠性的计算方法.     

数控机床位置伺服在线调试与动态性能分析研究

介绍一种在数控机床位置伺服系统在线调试中应用系统动态性能分析方法的基本原理，给出了一种位置伺服系统动态响应曲线、动态性能分析及其主要技术指标的实例。     

The form error prediction in side wall machining considering tool deflection

In this research, an effective method for the form error prediction in side wall machining with a flat end mill is suggested. The form error is predicted directly from the tool deflection without surface generation by cutting edge locus with time simulation. The developed model can predict the surface form error accurately about 300 times faster than the previous method. Cutting forces and tool deflection are calculated considering tool geometry, tool setting error and machine tool stiffness. The characteristics and the difference of generated surface shape in up milling and down milling are discussed. The usefulness of the presented method is verified from a set of experiments under various cutting conditions generally used in die and mold manufacturing. This study contributes to real time surface shape estimation and cutting process planning for the improvement of form accuracy.     

镀附钛、钼、钨金刚石与铜基合金结合剂工具的结构性能研究

为了实现金刚石与金属结合剂间的冶金结合,本文用镀Ti、Mo、W的金刚石与含Ni、Co的铜基合金结合剂制成了刀头,通过切割试验和抗折试验,研究了其强度特征和切割性能,并用X射线、扫描电镜和能谱分析对镀层和金刚石、结合剂之间的作用进行了微观分析。结果表明:Ti、Mo、W镀层一方面与金刚石发生界面化学反应形成相应的碳化物,另一方面又与金属结合剂形成化学键合并部分溶入结合剂液相中。这样,由Ti、Mo、W镀层的中介作用实现了铜基金属结合剂与金刚石之间的冶金结合,使金刚石工具的性能大幅度提高。