反复荷载下钢筋混凝土剪力墙的非线性有限元分析

本文介绍了反复荷载下非线性有限元分析程序,该程序针对钢筋混凝土剪力墙类结构的特点,采用了钢筋与混凝土复合单元计算模型,考虑混凝土裂面接触效应的反复加载混凝土应力-应变关系。在钢筋应力-应变关系中,还同时考虑了混凝土开裂后钢筋的拉伸强化效应及反复荷载下钢筋的Bausinger效应。本文还介绍了作者利用该程序对反复荷载试验的试件及Ger-venka的剪力墙板进行的计算分析。结果表明,本文所采用的分析模型是合理、准确的;和国内外以往的分析比较,本文的方法成功地消去了力-位移滞回曲线中的拐点现象,而且计算的混凝土裂缝开闭也能和实测较好地吻合。表明本文方法能为分析反复荷载下钢筋混凝土剪力墙类结构性能提供一个准确、有力的工具。     

Passivation and corrosion behaviours of cobalt and cobalt-chromium-molybdenum alloy

Passivation and corrosion behaviour of the cobalt and cobalt-base alloy Co30Cr6Mo was studied in a simulated physiological solution containing chloride and bicarbonate ions and with pH of 6.8. The oxido-reduction processes included solid state transformations occurring at the cobalt/electrolyte interface are interpreted using theories of surface electrochemistry. The dissolution of cobalt is significantly suppressed by alloying it with chromium and molybdenum, since the alloy exhibited “chromium like” passivity. The structural and protective properties of passive oxide films formed spontaneously at the open circuit potential or during the anodic polarization were studied using electrochemical impedance spectroscopy in the wide frequency range.     

Cyclic X-Y mechanical tests: A new method to perform in situ reversed-deformation experiments in the high-voltage electron microscope

There has been, in the past, only limited success with in situ cyclic or reversed plastic deformation tests in the transmission electron microscope (TEM). This is probably partly due to problems associated with buckling of the foil when an applied tensile or shear stress is reversed. Mechanical analysis shows that dislocation movement can be reversed by tensile stressing in alternating perpendicular directions (i.e., 90° rotations of a tensile stress); thus buckling of the foil can be avoided. A design for performing such X-Y in situ TEM tests is presented, with observations that demonstrate its feasibility.     

双瓣止回阀阀瓣强度分析及优化设计

通过对双瓣止回阀阀瓣的有限元分析,介绍了有限元分析法在阀门强度和刚度分析方面的应用。     

Extraction of fission palladium by Aliquat 336 and electrochemical studies on direct recovery from ionic liquid phase

The wide electrochemical window and ion exchange properties of a room-temperature ionic liquid (RTIL) have been exploited for the extraction of palladium from nitric acid medium into ionic liquid phase — followed by direct electrodeposition of the metal from the organic phase. Extraction of palladium by commercial Aliquat 336 ionic liquids, tri-n-octylmethylammonium chloride (TOMAC) and tri-n-octylmethylammonium nitrate (TOMAN), was studied as a function of [HNO₃], [NO₃⁻] and [TOMAN]. The distribution ratio (D_Pd(II)) of palladium in TOMAN increased with an increase in the concentration of nitric acid and passed through a maximum at 1.0 M nitric acid. In contrast, the D_Pd(II) value of palladium in TOMAC decreased continuously with an increase in the concentration of nitric acid. Substantial amounts of water and nitric acid were also co-extracted into the organic phase with palladium.     

设计沟通中的噪音——从传播学角度看设计沟通中的困难

文章从传播学的角度探讨设计沟通过程中的困难。设计沟通是贯穿于整个设计管理活动的重要环节,是传达信息的主要途径,但在实践过程中却经常遇到困难,导致设计活动无法顺利进行。文章通过引入噪音的概念,分析设计沟通的困难产生的原因,并利用传播学的理论提出通过冗余调节噪音的想法,以解决设计沟通中的问题。     

Automated synthesis of multiple analog circuits using evolutionary computation for redundancy-based fault-tolerance

Analog circuits are one of the most important parts of modern electronic systems and the failure of electronic hardware presents a critical threat to the completion of modern aircraft, spacecraft, and robot missions. Compared to digital circuits, designing fault-tolerant analog circuits is a difficult and knowledge-intensive task. A simple but powerful method for robustness is a redundancy approach to use multiple circuits instead of single one. For example, if component failures occur, other redundant components can replace the functions of broken parts and the system can still work. However, there are several research issues to make the redundant system automatically. In this paper, we used evolutionary computation to generate multiple analog circuits automatically and then we combined the solutions to generate robust outputs. Evolutionary computation is a natural way to produce multiple redundant solutions because it is a population-based search. Experimental results on the evolution of the low-pass, high-pass and band-stop filters show that the combination of multiple evolved analog circuits produces results that are more robust than those of the best single circuit.     

缩短机械加工中零件等待时间的方法讨论

在机械制造系统中，零件在各工序间加工及流转，一般情况下许多工序难免存在零件等待加工的现象。为了提高系统的加工性能，本文利用现代仿真技术及排队论，通过优化工件在各相关工序的加工时间，从而消除工序中存在的工件等待加工现象。文章提出的方法还可用来预测机械制造系统的运行性能、比较各种可供选择的方案以及实现制造系统决策的优化。     

无损检测的质量控制技术

以控制无损检测中的误判为例,介绍了质量控制技术在无损检测质量管理工作中的应用.首先利用流程图发现出现误判问题的产生环节,即缺陷的定位或定量错误.然后利用两图一表(因果图、排列图和检查表)分析引起缺陷定量或定位错误的原因.最后制定了防止误判产生的对策表.采用质量控制技术可以实现无损检测质量的持续改进.     

Electrochemical characteristics for redox systems at nano-honeycomb diamond

Electrochemical characteristics for several redox systems at diamond films with highly ordered nanometer-scale cylindrical pores (‘nano-honeycombs’) were examined with cyclic voltammetry (CV) and electrochemical impedance measurements. The cyclic voltammetric anodic-cathodic peak separations for these nano-honeycomb electrodes were in the same range as those for polished polycrystalline diamond films, indicating that the involvement of the oxygen-terminated surface of the nano-pore walls, which should give rise to large peak separations for certain redox couples was only slight. Moreover, the peak currents in the CV were not enhanced to the extent expected on the basis of the roughness factors of the nano-honeycomb films. Ac impedance plots results indicated the existence of a concentration gradient of the reactant in the nano-pores, which is in agreement with theoretical predictions for charge transfer reactions in porous electrodes. The average concentration of the reactant (Fe^2+/3+) inside the nano-pores was a factor of ca. 80 lower than that in the bulk electrolyte. The results of the impedance analysis also indicated an increase in the reaction resistances with decreasing pore diameters.