变频器在机床电力拖动中的应用问题

本文分析了机床拖动的特点,变频调速对电动机及变频器的要求,分析了变频器应用中的干扰问题及采取的抑制措施。     

Axial characterization of catalytic activity in close-coupled lightoff and underfloor catalytic converters

A exhaust system consisting of a close-coupled Pd technology 32 in³ lightoff converter and Pt/Rh technology 170 in³ underfloor converter was vehicle-aged for 56000 miles on a vehicle equipped with a 3.8 l engine. Following this aging, the converters were taken off the vehicle and cut into 1″ thick sections along their axis and characterized for lightoff and warmed-up activity using a laboratory reactor to simulate vehicle exhaust. Each section was also analyzed for the quantity of oil additive poisons (phosphorus and zinc) deposited. Following this initial characterization, the phosphorus and zinc deposits were removed, and the sections were characterized again for lightoff and warmed-up activity. This procedure was used to qualitatively determine the relative contribution of oil additive poisoning and thermal sintering to the total activity deterioration as a function of axial position in the catalyst monoliths.

Analysis of the lightoff converter as taken from the vehicle showed a dramatic axial gradient in the lean and stoichiometric lightoff and warmed-up (600°C) performance for HC, CO and NO_x, with most of the deterioration having taken place in the forward-most 1″ section of the converter, which was consistent with the gradient in the deposition of phosphorus (P) and zinc (Zn) in this converter. Comparison of these data sets with those obtained after removal of the P and Zn poisons indicates that most of the total deterioration of lean HC and CO activity can be attributed to P and Zn poisoning of the forwardmost 1″ section. When tested under stoichiometric conditions, most of the deterioration of HC activity is attributable to P and Zn poisoning, while most of the deterioration of CO and NO_x activity is attributable to thermal deterioration. A similar activity and poison deposition gradient was detected in the underfloor converter, but to a smaller extent.     

Digital image capture — Filmless camera technology and techniques

Summaries  The digital imaging revolution continues apace, affecting the whole spectrum of the photographic industry. In many part of the world digital cameras now outsell conventional film cameras, and many of the disadvantages associated with digital image capture in the very recent past^1.2 have been nulified. As the digital industry grows, the various technologies involved continue to be ever innovative. With respect to digital cameras, the image sensor performance criteria have improved immeasurably since the launch of the first solid-state camera in the early 1980s. The charge-coupled semiconductor device (CCD), for so long the unrivalled image-capture component in digital cameras, is now being challenged by complementary metal oxide semiconductor (CMOS) technology and the innovatively re-designed Fujifilm Super CCD. In addition, the recent introduction of the Foveon full-colour imaging sensor has added a new dimension to digital image capture. This paper reviews current image-capture sensors and the way that the various digital imaging camera designs are able to record and reproduce colour images.

---

Techniques et technologie de l’appareil sans pellicule et a capteur d’image numérique

Résumé  La révolution provoquée par l’imagerie numérique devient de plus en plus importante et a une influence sur le spectre entier de l’industrie photographique. Il y a beaucoup d’endroits dans le monde ou l’on vend plus d’appareils photo numériques que d’appareils photo de tradition, et beaucoup des inconvenients qui étaient relatifs à la capture d’image numérique dans le passé recent récent ont été supprimés. Au fur et à mesure que l’industrie photographique s’accroft, les plusieurs technologies relatives continuent d’être de plus en plus innovatrices. Quant aux appareils photo numériques, les critères de la performance du capteur d’image ont amélioré infiniment depuis le lancement du premier appareil photo à semi-conducteurs tot dans les annees 80. Le dispositif à transfert de charges (CCD), depuis si longtemps le composant sans pareil en ce qui concerne la capture d’image, est remis en question par la technologie du métal-oxyde-semi-conducteur complémentaire (CMOS) et par le Fujifilm Super CDD qui a été repensé d’une manière tres innovatrice. En plus, l’introduction récente du capteur Foveon pour image couleur a ajouté une nouvelle dimension à la capture d’image numérique. Cet article examine les capteurs d’image courants aussi bien que la fa?on dont les plusieurs conceptions d’appareils photo à imagerie numérique sont capables d’enregistrer et de reproducire des images en couleur.

---

Digitale Fotografie — Technologie und Technik der film-losen Kamera

Zusammenfassung  Die digitale Revolution geht weiter voran und hat das ganze Spektrum der fotografischen Industrie ergriffen. In vielen Teilen der Welt werden heute mehr digitale Kameras als konventionelle Filmkameras verkauft, und viele der anfaenglichen Nachteile der digitalen Bilderfassung bestehen heute nicht mehr. Viele Innovationen treiben die Digitalindustrie voran. Bei Digitalkameras hat sich die Bildsensorleistung von den ersten Modellen in den fruehen 80er Jahren enorm entwickelt. Die Charge-coupled Device (CCD), so lange der unangefochtene K?nig der digitalen Bilderfassung, bekommt heute von komplimentĂren Metalloxidhalbleitern (CMOS) und von der innovativ neu-entwickelten Fujifilm Super CCD Konkurrenz. Dazu hat die Einführung des Foveron Vollfarbbildsensors der Digitalfotografie eine neue Dimension verliehen. Diese Arbeit vergleicht die gegenwartigen Bilderfassungssensoren, und wie verschiedene Digitalkamera-Varianten Farbbilder aufnehmen und wiedergeben.

     

一种适用于降压DC-DC的改进型电流检测电路

基于电流模式控制能够较好地改善DC-DC的性能,设计一种适用于降压DC-DC的改进型电流检测电路,所提出的电流检测电路提高了电流感应的速度和精度。通过对电路的理论分析与设计,采用SMIC 0.18μm CMOS工艺模型,利用Cadence工具对电路进行仿真验证,所提出的电流检测电路在负载电流为50 mA~500 mA时都能够达到96%的效率以及小于40 ns的建立时间。在开关频率为2 MHz时,输入电压范围为2.5 V~4.2 V,所需电感值为4.7μH,电容值为10μF,输出电压纹波小于18 mV。     

采用嵌人式技术的智能电导率仪设计

为了实时精确地测量水溶液的电导率,设计了一种高精度的智能电导率仪。系统采用S3C2440为核心控制处理器,包含时钟模块、正弦交流激励模块、精密整流模块、A／D采样模块、触摸屏显示模块、以太网接口模块、数据存储模块、故障报警模块等。提供数据采集和处理、触摸屏显示、以太网通信、故障报警等功能。实验数据表明,该仪表能准确测量水溶液的电导率,测量精度高、工作稳定可靠、重复性好,有较高的实用价值和推广意义。     

一种低交叉调整率的四路输出DC/DC变换器设计

介绍了一款四路输出DC/DC变换器的设计,并给出了主要技术指标、组成方框图、电路原理图和变压器的绕制方法。该设计在保证纹波噪声、效率、体积和重量等重要指标均满足要求的情况下,仍具有低交叉调整率的突出优点。     

一种准Z-源DC-DC变换器的建模与控制

分析了准Z-源DC-DC变换器在稳态时的工作原理,根据状态空间平均法建立了准Z-源DC-DC网络在电流连续工作模式下(CCM)的交流小信号模型,并对模型进行分析,获得控制至输出的传递函数,实现了输出电压闭环控制。最后建立了实验样机,进行了实验验证。     

智能混合控制器在转炉干法除尘中的应用

转炉干法除尘蒸发冷却器出口烟气温度大多数采用常规串级控制方式,但转炉冶炼前期控制效果并不理想.对转炉冶炼过程及蒸发冷却器出口烟气温度的控制难点进行研究,找出常规串级控制方式的缺点,并设计出一种智能混合控制器.采用智能模糊控制器和常规控制器并联的控制方式,对蒸发冷却器出口烟气温度进行控制,控制效果理想.实际应用表明,同常规串级控制器相比,智能混合控制器具有响应快、被控对象稳定等优点.     

NEURAL-NETWORK-AIDED DESIGN OF AUTOMOBILE EXHAUST CATALYSTS

A priori design of catalysts is not yet possible. Such task would demand unavailable scientific knowledge of the correlations among synthesis parameters and resulting solid state and surface structures, on the one hand, and among those atomic-level structural details and their catalytic functions, on the other hand. To avoid testing every possible combination, therefore, the applied chemist or chemical engineer must identify empirical correlations underlying the existing experimental data base.

The ability of artificial neural networks to identify complex correlations and to predict the result of experiments has recently generated considerable interest in various areas of science and engineering. In this paper, neural networks are used to identify composition-performance relationships in automobile exhaust catalysts.

This work employs an artificial neural network technique to do a sensitivity analysis of the conversions of pollutant gases as a function of the catalyst composition and the operating conditions. This approach converges on the optimum catalyst composition and operating condition in order to produce specified conversions of carbon monoxide, hydrocarbons and nitrogen oxides, to carbon dioxide, water and di-nitrogen respectively.     

氨汽提合成塔腐蚀控制探讨

分析尿素合成塔腐蚀机理、类型,并提出防腐蚀的控制方法。