图书馆网站设计的探讨

介绍了当今信息时代建设图书馆网站的重要性和作用 ,以及在网站设计评估中应着重注意的包括网站内容、页面设计及安全性能等三方面的问题 ,同时提出 ,图书馆网站建设中如何在这几方面进行改进和完善。     

浅析两种分布式路由选择算法

本文介绍及分析了两种基本的动态路由选择算法.     

Optimal control and operation of drum granulation processes

Process optimisation and optimal control of batch and continuous drum granulation processes are studied in this paper. The main focus of the current research has been: (i) construction of optimisation and control relevant, population balance models through the incorporation of moisture content, drum rotation rate and bed depth into the coalescence kernels; (ii) investigation of optimal operational conditions using constrained optimisation techniques; (iii) development of optimal control algorithms based on discretized population balance equations; and (iv) comprehensive simulation studies on optimal control of both batch and continuous granulation processes. The objective of steady state optimisation is to minimise the recycle rate with minimum cost for continuous processes. It has been identified that the drum rotation-rate, bed depth (material charge), and moisture content of solids are practical decision (design) parameters for system optimisation. The objective for the optimal control of batch granulation processes is to maximize the mass of product-sized particles with minimum time and binder consumption. The objective for the optimal control of the continuous process is to drive the process from one steady state to another in a minimum time with minimum binder consumption, which is also known as the state-driving problem. It has been known for some time that the binder spray-rate is the most effective control (manipulative) variable. Although other possible manipulative variables, such as feed flow-rate and additional powder flow-rate have been investigated in the complete research project, only the single input problem with the binder spray rate as the manipulative variable is addressed in the paper to demonstrate the methodology. It can be shown from simulation results that the proposed models are suitable for control and optimisation studies, and the optimisation algorithms connected with either steady state or dynamic models are successful for the determination of optimal operational conditions and dynamic trajectories with good convergence properties.     

单片机系统的动态加密技术

单片机系统产品的加密和解密技术永远是一个矛盾的统一体。然而 ,为了更好的保护好自己的单片机技术成果和知识产权 ,加大解密成本 ,研究新型加密技术仍是保护成果的主要手段之一。文中在讨论了传统的单片机系统加密和解密技术的基础上 ,提出一种实用而有效的动态加密技术的实现方案。     

光链路设计的Java小程序实现

介绍光链路设计的原理和公式 ,给出光链路设计的Java小程序实现 ,以期有效解决在手工进行光链路设计及计算中存在的问题。     

基于Pro/ENGINEER链传动运动仿真

介绍了Pro/ENGINEER 2001的Pro/MECHANICA模块,提出了一种基于Pro/ENGI-NEER建立链传动运动模型的一般方法,对运动的模型进行简化并阐述了零件、组件的建立到运动模型建立和运动仿真的完成.同时,也提出了链传动运动模型建立的技巧.     

浅议斜坡稳定性计算中水压力的作用

理论推导证明了静水压力模式与动水压力模式下地下水作用效果的差异,并且结合前人的研究成果,提出要取得合理的稳定性计算结果,两种水压力模式下所选用的强度参数应有所区分,对于静水压力模式,应取快剪或不排水剪指标;对于动水压力模式,则应取用慢剪或排水剪指标。最后采用一个具体的工程实例验证了结论的合理性。     

Effect of electricity tariff on the optimum insulation-thickness in building walls as determined by a dynamic heat-transfer model

Thermal insulation is one of the most effective energy-conservation measures in buildings. Despite the widespread use of insulation materials in recent years, little is known regarding their optimum thickness under dynamic thermal conditions. Insulated concrete blocks are among the units most commonly used in the construction of building walls in Saudi Arabia. Typically, the insulation layer thickness is fixed at a value in the range 2.5–7.5 cm, regardless of the climatic conditions, type and cost of insulation material, and other economic parameters. In the present study, a numerical model based on a finite-volume, time-dependent implicit procedure, which has been previously validated, is used to compute the yearly cooling and heating transmission loads under steady periodic conditions through a typical building wall, for different insulation thicknesses. The transmission loads, calculated by using the climatic conditions of Riyadh for a west-facing wall, are fed into an economic model in order to determine the optimum thickness of insulation (L_opt). The latter corresponds to the minimum total cost, which includes the cost of insulation material and its installation plus the present value of energy consumption cost over the lifetime of the building. The optimum insulation thickness depends on the electricity tariff as well as the cost of insulation material, lifetime of the building, inflation and discount rates, and coefficient of performance of the air-conditioning equipment. In the present study, the effect of electricity tariff on the computed optimum insulation thickness is investigated. Different average electricity tariffs are considered; namely, 0.05, 0.1, 0.2, 0.3 and 0.4 SR/kWh (designated as Cases 1–5, respectively; 1 US$ = 3.75 Saudi Riyals). Results using moulded polystyrene as an insulating material show that the values of L_opt are: 4.8, 7.2, 10.9, 13.7 and 16.0 cm for Cases 1–5. Under the conditions of optimal insulation thickness for each electricity tariff, Case 1 gives the lowest total cost of 17.4 SR/m², while Case 5 gives the highest total cost of 53.1 SR/m². Corresponding thermal performance characteristics in terms of yearly total and peak transmission loads, R-value, time lag and decrement factor are presented.     

Complex system reliability modelling with Dynamic Object Oriented Bayesian Networks (DOOBN)

Nowadays, the complex manufacturing processes have to be dynamically modelled and controlled to optimise the diagnosis and the maintenance policies. This article presents a methodology that will help developing Dynamic Object Oriented Bayesian Networks (DOOBNs) to formalise such complex dynamic models. The goal is to have a general reliability evaluation of a manufacturing process, from its implementation to its operating phase. The added value of this formalisation methodology consists in using the a priori knowledge of both the system's functioning and malfunctioning. Networks are built on principles of adaptability and integrate uncertainties on the relationships between causes and effects. Thus, the purpose is to evaluate, in terms of reliability, the impact of several decisions on the maintenance of the system. This methodology has been tested, in an industrial context, to model the reliability of a water (immersion) heater system.