A new dynamic hydrogen reference electrode for applications in thin-film sensor systems

The realization and applicability of a new dynamic hydrogen reference electrode (DHRE) within an electrochemical microcell for sensor applications is reported. The electrodes are fabricated in thin-film technology and fixed within a flow-through device. An experimental setup for accurate electrochemical potential measurements is described. Smooth platinum, platinized platinum and pHEMA coated electrodes are investigated with regard to their initialization behavior, stability, reproducibility and interference with electrolytes. It is found that platinized platinum DHREs show excellent stability and reproducibility. For uncoated electrodes, the electrochemical potential is established within seconds. The potential is independent of the pH value within the range of pH 4–10. Interference with sulfate and phosphate is observed. Thus, the platinized platinum DHRE is well suited for bioanalytical sensor applications, where the pH value is buffered and the concentrations of the disturbing anions are constant or very low.     

基于第二代端口VLAN技术的交换机管理

应用第二代VLAN技术,以锐捷S2126交换机为基础,设计并实现了一个解决企业内部管理的交换机网络互连方案。     

数据库推理通道的动态控制

数据库推理问题是数据库安全研究的重要组成部分,主要研究推理通道的检测方法和控制策略。该文提出一种动态控制推理通道的方法。该方法为每个推理通道建立一个标识集合,利用集合中元素和推理通道中对象的关联来控制查询的处理,使用户能灵活地访问数据但又得不到足够的信息来推理。与以前提出的方案不同,该方案保证了数据的最大可用性,同时有效地阻止推理并保持了快速的查询处理能力。     

A Generalization of a Lower Bound Technique due to Fredman and Saks

{In a seminal paper of 1989, Fredman and Saks proved lower bounds for some important data-structure problems in the cell probe model. In particular, lower bounds were established on worst-case and amortized operation cost for the union-find problem and the prefix sum problem. The goal of this paper is to turn their proof technique into a general tool that can be applied to different problems and computational models. To this end we define two quantities: Output Variability depends only on the model of computation. It indicates how much variation can be found in the results of a program with certain resource bounds. This measures in some sense the power of a model. Problem Variability characterizes in a similar sense the difficulty of the problem. } Our Main Theorem shows that by comparing a model's output variability to a problem's problem variability, lower bounds on the complexity of solving the problem on the given model may be inferred. The theorem thus shows how to separate the analysis of the model of computation from that of the problem when proving lower bounds. We show how the results of Fredman and Saks fit our framework by computing the output variability of the cell probe model and the problem variability for problems considered in their paper. This allows us to reprove their lower bound results, and slightly extend them. The main purpose of this paper though is to present the generalized technique. Received January 25, 1999; revised July 30, 1999.     

动画动态定位在网页上的方法

网页上经常会显示一些动画,如重要信息或广告等。本文用JavaScript实现了使动画固定在网页画面的相对位置上,不会被移出画面。     

A probabilistic integrated object recognition and tracking framework

This paper describes a probabilistic integrated object recognition and tracking framework called PIORT, together with two specific methods derived from it, which are evaluated experimentally in several test video sequences. The first step in the proposed framework is a static recognition module that provides class probabilities for each pixel of the image from a set of local features. These probabilities are updated dynamically and supplied to a tracking decision module capable of handling full and partial occlusions. The two specific methods presented use RGB color features and differ in the classifier implemented: one is a Bayesian method based on maximum likelihood and the other one is based on a neural network. The experimental results obtained have shown that, on one hand, the neural net based approach performs similarly and sometimes better than the Bayesian approach when they are integrated within the tracking framework. And on the other hand, our PIORT methods have achieved better results when compared to other published tracking methods in video sequences taken with a moving camera and including full and partial occlusions of the tracked object.     

催化重整装置紧急停车系统

介绍固定床半再生催化重整装置紧急停车系统的组成、原理及工作过程，给出调试和维护要点。     

Experimental investigation on the detachable thermosiphon for conduction-cooled superconducting magnets

A detachable thermosiphon, as a transient thermal switch for conduction-cooled superconducting magnet, is designed, fabricated and tested. A thermosiphon between the first and second stages of a cryocooler can reduce the cool-down time of a conduction-cooled superconducting magnet by using the large cooling capacity of the first stage. The thermosiphon is a very efficient heat transfer device until all the working fluid in it freezes (off-state). After the working fluid freezes and the second stage temperature becomes lower than that of the first stage, however, the thermosiphon then becomes a conduction heat leak path between two stages of the cryocooler. Considering a very small cooling capacity of the second stage of the cryocooler around 4.2 K, the conduction heat loss is not negligible. Therefore, a detachable thermosiphon, made of a metal bellows, is considered to be able to eliminate such a conduction heat leak. The mock-up magnet is cooled down with the thermosiphon and the thermodynamic states of the thermosiphon and the mock-up magnet are precisely examined during the whole cool-down process. At off-state, the thermosiphon is detached mechanically from the magnet. In this way, the conduction heat leak path through the thermosiphon wall is completely eliminated. This paper describes the detailed transient operation of the detachable thermosiphon using nitrogen as the working fluid.     

永磁同步伺服电动机的动态参数

动态参数是影响伺服电动机动态性能最主要的因素之一.动态参数的高低直接决定伺服电动机动态及稳态性能的好坏.对传统的伺服电动机而言,几个主要的动态参数都有较清晰的定义和概念,长期以来在工程实践中广泛使用.但对正弦波驱动的永磁伺服电动机来说,电机的力矩常数Kt、反电势常数Ke、电气时间常数τe、机械时间常数τm和阻尼因数D等都有了新的变化,实践中常引起误解和混淆.文中主要分析永磁同步伺服电动机几个动态参数的含义以及和传统参数之间的差异,并从控制系统的要求出发,对几个最基本的动态参数和参数之间的相互关系进行分析,得出了一些实用的结论.     

路灯监控终端开关灯控制转换原理

通过分析QHO电路原理，来阐述路灯监控终端进行开关控制转换的原理。