单片机系统的动态加密技术

单片机系统产品的加密和解密技术永远是一个矛盾的统一体。然而 ,为了更好的保护好自己的单片机技术成果和知识产权 ,加大解密成本 ,研究新型加密技术仍是保护成果的主要手段之一。文中在讨论了传统的单片机系统加密和解密技术的基础上 ,提出一种实用而有效的动态加密技术的实现方案。     

Effect of electricity tariff on the optimum insulation-thickness in building walls as determined by a dynamic heat-transfer model

Thermal insulation is one of the most effective energy-conservation measures in buildings. Despite the widespread use of insulation materials in recent years, little is known regarding their optimum thickness under dynamic thermal conditions. Insulated concrete blocks are among the units most commonly used in the construction of building walls in Saudi Arabia. Typically, the insulation layer thickness is fixed at a value in the range 2.5–7.5 cm, regardless of the climatic conditions, type and cost of insulation material, and other economic parameters. In the present study, a numerical model based on a finite-volume, time-dependent implicit procedure, which has been previously validated, is used to compute the yearly cooling and heating transmission loads under steady periodic conditions through a typical building wall, for different insulation thicknesses. The transmission loads, calculated by using the climatic conditions of Riyadh for a west-facing wall, are fed into an economic model in order to determine the optimum thickness of insulation (L_opt). The latter corresponds to the minimum total cost, which includes the cost of insulation material and its installation plus the present value of energy consumption cost over the lifetime of the building. The optimum insulation thickness depends on the electricity tariff as well as the cost of insulation material, lifetime of the building, inflation and discount rates, and coefficient of performance of the air-conditioning equipment. In the present study, the effect of electricity tariff on the computed optimum insulation thickness is investigated. Different average electricity tariffs are considered; namely, 0.05, 0.1, 0.2, 0.3 and 0.4 SR/kWh (designated as Cases 1–5, respectively; 1 US$ = 3.75 Saudi Riyals). Results using moulded polystyrene as an insulating material show that the values of L_opt are: 4.8, 7.2, 10.9, 13.7 and 16.0 cm for Cases 1–5. Under the conditions of optimal insulation thickness for each electricity tariff, Case 1 gives the lowest total cost of 17.4 SR/m², while Case 5 gives the highest total cost of 53.1 SR/m². Corresponding thermal performance characteristics in terms of yearly total and peak transmission loads, R-value, time lag and decrement factor are presented.     

Complex system reliability modelling with Dynamic Object Oriented Bayesian Networks (DOOBN)

Nowadays, the complex manufacturing processes have to be dynamically modelled and controlled to optimise the diagnosis and the maintenance policies. This article presents a methodology that will help developing Dynamic Object Oriented Bayesian Networks (DOOBNs) to formalise such complex dynamic models. The goal is to have a general reliability evaluation of a manufacturing process, from its implementation to its operating phase. The added value of this formalisation methodology consists in using the a priori knowledge of both the system's functioning and malfunctioning. Networks are built on principles of adaptability and integrate uncertainties on the relationships between causes and effects. Thus, the purpose is to evaluate, in terms of reliability, the impact of several decisions on the maintenance of the system. This methodology has been tested, in an industrial context, to model the reliability of a water (immersion) heater system.     

两种含水炸药动压下减敏作用的实验研究

用实验方法对两种含水炸药—水胶炸药和珍珠岩敏化的乳化炸药动压下的减敏作用进行了研究。为了更全面深入地研究这问题,提出了临界压死距离和临界距离两个概念。研究表明,含水炸药的减敏作用与药包间距和延期时差关系很大。水胶炸药的临界压死距离大于乳化炸药,而它们的临界距离相当,这表明两种炸药发生减敏的难易程度相近,但是乳化炸药的抗压死能力比水胶炸药大。采用5段延期电雷管引爆时两种含水炸药的减敏作用比采用2段延期电雷管引爆严重些。     

A branch-and-price algorithm to solve the molten iron allocation problem in iron and steel industry

The molten iron allocation problem (MIAP) is to allocate molten iron from blast furnaces to steel-making furnaces. The allocation needs to observe the release times of the molten iron defined by the draining plan of the blast furnaces and the transport time between the iron-making and steel-making stages. Time window constraints for processing the molten iron must be satisfied to avoid freezing. The objective is to find a schedule with minimum total weighted completion time. This objective reflects the practical consideration of improving steel-making efficiency and reducing operation cost caused by the need for reheating. Such a problem can be viewed as a parallel machine scheduling problem with time windows which is known to be NP-hard. In this paper, we first formulate the molten iron allocation problem as an integer programming model and then reformulate it as a set partitioning model by applying the Dantzig–Wolfe decomposition. We solve the problem using a column generation-based branch-and-price algorithm. Since the subproblem of column generation is still NP-hard, we propose a state-space relaxation-based dynamic programming algorithm for the subproblem. Computational experiments demonstrate that the proposed algorithm is capable of solving problems with up to 100 jobs to optimality within a reasonable computation time.     

PV module dynamic impedance and its voltage and frequency dependencies

The paper presents a derivation of the dynamic impedance of a PV module. At each bias voltage, the general form of the impedance describes a semicircular locus in the complex impedance plane. Intercepts of each impedance locus yield series, shunt and dynamic resistance of a module. Determinations of the dynamic impedance of a x-Si PV module in the dark with five reverse bias voltages and over a frequency range of 1 Hz to 60 kHz are made. The experimental results validate the derived general form of dynamic impedance.     

Modeling the effect of pigment morphology on the dynamic compression of coating layers using DEM

In the present paper, discrete element method (DEM) was employed to investigate the effect of pigment morphology on packing dynamics and compressive behavior of paper coating layers in calendering process. Spherical, platy, and needle-like particles, representing GCC, delaminated clay, and aragonite PCC pigments, were considered in this study. For each particle shape, the compression of coating structures formed by mono-sized and poly-dispersed pigments were modeled. Stress–strain behavior of the coating layers and in-plane and out-of-plane movements of the pigment particles during the compression were computed under the same maximum compressive stress. Simulation results revealed that the in-plane movements of the pigment particles during compression in the calender nip were small in magnitude (<0.35 μm). These findings help to better understand the smoothening phenomena of coating structures during the calendering process.     

Java语言及其虚拟机技术探讨

随着Internet的迅猛发展，Internet编程语言Java愈来愈成为计算机行业的焦点。本文在简述了Java的主要特点后，重点对Java最关键的技术──虚拟机进行了深入的探讨。     

漳泽水库最优兴利调度研究

漳泽水库供水能力下降。优化调度方式是提高水库效益的最有效途径。通过采用随机动态规划方法与模拟模型交互运算得到现行控制水位的水库优化调度图。采用同样方法对不同控制水位的水库运行方式进行优化调度，选出的规划水库最优控制水位为汛限水位９０４ ．５ ｍ ，正常高水位９０５ ．５ ｍ 。优化的控制水位方案在保障水库防洪安全的前提下可供给城市生活和工业用水６ ３００ 万ｍ３ ，较现行控制水位下的供水量提高１ ２５５ 万ｍ３ 。但农业用水仍然不足，应采取一定措施给予解决，如对灌区工程进行改造，因地制宜采取不同节水措施和污水回用等。     

泡沫沥青混合料动态性能研究

为更好地模拟泡沫沥青混合料在车辆动载作用下的动态性能，便于与国外相关研究进行比较，采用劈裂法对混合料动态性能进行研究。通过试验研究骨料类型、级配、水泥用量等对泡沫沥青混合料动态回弹模量的影响，总结了泡沫沥青混合料动静模量的关系。