动态聚焦电子枪的模拟与实验研究

动态聚焦技术是为了满足大屏幕高分辨率彩色显像管及高分辨率彩色显示管的发展需求而产生的一项新技术。在本文中，作者首先提出了一种动态聚焦电子枪结构，进行了数值计算与分析，制作了动态聚焦电子枪并装管实验。通过对实验样管的测试与分析。证实该枪性能良好，动态聚集效果明显。     

A real-time road pricing system: The case of a two-link parallel network

A real-time road pricing system in the case of a two-link parallel network is proposed in this paper. The system that is based on a combination of Dynamic Programming and Neural Networks makes “on-line” decisions about road toll values. In the first phase of the proposed model, the best road toll sequences during certain time period are calculated off-line for many different patterns of vehicle arrivals. These toll sequences are computed using Dynamic Programming approach. In the second phase, learning from vehicle arrival patterns and the corresponding optimal toll sequences, neural network is trained. The results obtained during on-line tests are close to the best solution obtained off-line assuming that the arrival pattern is known.     

Preliminary Assessment of Contaminants in Soft Sediments of the Detroit River

Soft sediments from the Detroit River were analyzed for the USEPA priority pollutants to generally characterize contaminant distribution. Forty-three were detected. Highest heavy metal concentrations were found in the Trenton Channel and immediately downstream of Grosse Ile. They ranged from an area mean (N = 2) of 0.19 mg/kg mercury to 338.7 mg/kg zinc (dry weight). Polynuclear aromatic hydrocarbons ranged from 0.1 mg/kg to 38.8 mg/kg (mean, N = 2) with the highest levels near Grosse Ile. PCBs ranged from 0.015 mg/kg to 1.7 mg/kg (mean, N = 2). Organochlorine pesticides were not detected except for a trace of heptachlor in one sample. Sediment contamination in the Detroit River is widespread with higher concentrations on the U.S. side downstream of the Rouge River and in the Trenton Channel. The significance of these in-place pollutants to biota and as a source to Lake Erie is still unknown.     

微光CCD摄像器件综合特性的分析与比较

ＣＣＤ的优良特性使其在微光电视技术领域得到了广泛运用。本文对各种微光ＣＣＤ摄像器件的综合特性例如信噪比、探测率、动态范围与计数模式等进行了详细的研究与对比，并得出基本结论。     

Adhesive Contact of a Membrane with a Hemispherical Indenter: Theoretical Analysis and Model Liquid System

The axisymmetric Laplace equation is solved numerically to extract contact-angle data for a flat liquid/vapor interface contacting a submerged hemispherical solid. The liquid/vapor interface is treated as a membrane, with a membrane tension equal to the surface energy of the liquid. By measuring the vertical displacement of the membrane and the projected contact area the membrane makes with the hemisphere, the contact angle and correspondingly the driving force for motion of the contact line can be measured. We show that characteristic receding and advancing contact angles can be obtained by measuring the contact radii formed upon initial contact between the interface and hemisphere and final contact just prior to detachment of the interface, respectively. Use of the technique is illustrated with a model experiment involving the contact of an air/water interface with a poly(methyl methacrylate) surface.     

管内材料高温放气性能的测试及应用研究

管内材料放气性能的优劣直接影响着整管的性能和寿命.本文简介了测试管内材料高温放气性能的原理、装置和方法.文中列举的几项应用实例表明,本项测试结果对产品质量控制、工艺技术改进和材料进厂检验及国产化攻关都具有指导意义.     

Optimal control and operation of drum granulation processes

Process optimisation and optimal control of batch and continuous drum granulation processes are studied in this paper. The main focus of the current research has been: (i) construction of optimisation and control relevant, population balance models through the incorporation of moisture content, drum rotation rate and bed depth into the coalescence kernels; (ii) investigation of optimal operational conditions using constrained optimisation techniques; (iii) development of optimal control algorithms based on discretized population balance equations; and (iv) comprehensive simulation studies on optimal control of both batch and continuous granulation processes. The objective of steady state optimisation is to minimise the recycle rate with minimum cost for continuous processes. It has been identified that the drum rotation-rate, bed depth (material charge), and moisture content of solids are practical decision (design) parameters for system optimisation. The objective for the optimal control of batch granulation processes is to maximize the mass of product-sized particles with minimum time and binder consumption. The objective for the optimal control of the continuous process is to drive the process from one steady state to another in a minimum time with minimum binder consumption, which is also known as the state-driving problem. It has been known for some time that the binder spray-rate is the most effective control (manipulative) variable. Although other possible manipulative variables, such as feed flow-rate and additional powder flow-rate have been investigated in the complete research project, only the single input problem with the binder spray rate as the manipulative variable is addressed in the paper to demonstrate the methodology. It can be shown from simulation results that the proposed models are suitable for control and optimisation studies, and the optimisation algorithms connected with either steady state or dynamic models are successful for the determination of optimal operational conditions and dynamic trajectories with good convergence properties.     

Assessing the relative priority of projects

Where there are a large number of projects competing for a limited pool of resources, projects have to be assigned priorities to determine which should proceed and which should be curtailed. The traditional economic procedures for assessing the relative priority of projects are reviewed, and alternative methods of ranking projects are suggested, with particular emphasis on methods that are inexpensive and easy to use.