Effect of Impurities on the Syndiospecific Coordination Polymerization of Styrene

Summary: The effect of impurities on the coordination polymerization has generally been classified and discussed in different ways and has been investigated in detail in the syndiospecific homo‐ and copolymerization of styrene. With regard to impurities of styrene, phenylacetylene as an unpolar impurity containing separate multiple bonds, 1‐phenyl‐1,2‐ethanediol and ω‐hydroxyacetophenone as examples of polar impurities, and ethylbenzene as an other unpolar impurity have been investigated regarding the effect on the polymerization rate and the influence on the molecular properties of the syndiotactic polystyrenes. In the syndiospecific copolymerization with p‐methylstyrene, indene shows a different behavior regarding the decrease of the polymerization conversion depending on the comonomer concentrations present in the monomer mixture. Additionally, the effect of impurities of the catalyst system on the syndiospecific styrene polymerization has been demonstrated, particularly of octahydrofluorene as a component of the transition metal compound and of trimethylaluminium as a component of the cocatalyst methylaluminoxane. All results have been discussed with respect to the mechanisms of the effects on polymerization behavior and on polymer properties.

Dependence of the relative polymerization conversion on the amount of indene added to the monomer mixture in styrene (ST)/p‐methylstyrene (PMS) copolymerization (catalyst n‐ratio: 0.5; molar ratio MAO:Ti = 110:1; polymerization temperature: 60 °C; polymerization time: 45 min).     

洗发、护发产品功能添加剂

综述了洗发、护发二合一香波的功能添加剂。从消费者对产品的诉求着手，介绍了改善泡沫润滑感、泡沫稳定性的非离子水溶性聚氧乙烯醚聚合物，改善头发干、湿梳理性及柔软性的阳离子聚合物、阳离子表面活性剂和聚二甲基硅氧烷，维持香波在货架期内稳定的悬浮稳定剂、防腐剂，以及赋予洗发、护发二合一香波附加功能的去屑成分、防晒成分和头发营养滋润成分等。     

电子辐射对渗透和非渗透性客体上指纹信息记录的影响

由于恐怖分子利用邮政系统投寄携带炭疽病毒的邮件,传播病毒,已引起美国政府在邮政系统,选择地利用电子辐射杀死病毒。然而,这种病毒袭击并没有得到有效控制,却使信封内的邮件由于高温辐射,受到损坏。有报道说,由于电子辐射使纸张、珠宝、信用卡、软盘和光盘及其它电子材料受到损害。某些研究已在法庭科学中得到验证。本文介绍辐射过程在渗透和非渗透性客体上,对化学试剂、生物酶记录指纹信息的影响。     

Rheological properties and foam processibility of precured EPDM

EPDM foam was prepared by dynamically vulcanizing EPDM compound in a HAAKE rheometer firstly, then mixing the partially precured EPDM compound with a blowing agent and a sulfur vulcanizing system on a two roll mill. The compound was extruded through a cold feed extruder, and the extrudate was foamed in a circulating hot air oven. EPDM compound was vulcanized partly in the HAAKE rheometer, the final torque increases with increasing sulfur content. Rheological measurement shows the dynamic storage modulus, the loss modulus, and the complex viscosity of precured EPDM compound increase with increasing sulfur content. Then the partially precured EPDM compound was compounded with a blowing agent and a sulfur vulcanizing systems, Rheometric measurement shows that the rate of vulcanization of partially precured EPDM compound is not affected by the precure. The blowing results show that the foam processibility could be improved and the expansion ratio increases in the same processing condition for optimum partially precured EPDM compound, which indicates the optimum crosslink density for EPDM could enhance the efficiency of blowing agent AC. SEM shows that the foam articles have a closed‐cell structure with few open cells, and the large cells inlay among the small cells. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3387–3394, 2006     

新型聚氨酯防水涂料性能的研究

本以聚醚多元醇和过量多异氰酸酯合成聚氨酯预聚体，以水为固化剂制备一种新型聚氨酯防水涂料，讨论了两种聚醚多元醇(N220／N3050)质量比、NCO质量分数、固化剂含量、甲乙两组分质量比对聚氨酯防水涂料力学性能的影响。     

Surface functionalized colloidal silica particles from an inverse microemulsion sol gel process

Colloidal silica particles are prepared via a sol gel technique carried out in an inverse microemulsion of water in a toluene solution of tetraethoxysilane (TEOS), stabilized by either an anionic surfactant AOT or isopropanol. Functionalized material was obtained using a functional coupling agent (RO)₃Si(CH₂)₃ X, X being a functional group such as methacryloyl, thiol, vinyl, amino group, or a chlorine atom. Functionalization can be carried out either directly via the direct copolycondensation of TEOS and the coupling agent, or in a two-step process involving a core-shell polycondensation of the coupling agent onto preformed silica particles. Kinetic studies of the copolycondensation are carried out using either²⁹Si NMR analysis or liquid chromatography. They show that the consumption of TEOS is more rapid than that of the coupling agent. The materials are characterized both chemically (elemental analysis, FTIR,¹³C and²⁹Si NMR CPMAS analysis), and by their particle size. The silica functionalized with a polymerizable methacryloyl group is encapsulated by a polymer layer in an inverse emulsion polymerization of acrylic acid. After inversion of the emulsion in water, the resulting material is covered with a layer of hydrophobic polymer in a conventional emulsion polymerization.     

JX系列高温脱氯剂的开发

通过脱氯剂穿透氯容随实验条件变化规律的研究，讨论高温脱氯剂的脱氯反应模型。基于对脱氯机理的认识，通过对活性组份筛选和制备方法研究，成功研制出以JX-5A脱氯剂为代表的JX系列高温脱氯剂，穿透氯容达到50％以上。     

Coupling geometric analysis and viability theory for system exploration: Application to a living food system

This paper addresses the issue of studying a food complex system in a reverse engineering manner with the aim of identifying the set of all possible actions that makes it reach a quality target with respect to manufacturing constraints. Once the set of actions is identified, several criteria can be considered to identify interesting trajectories and control policies. A viability approach, coupling the viability theory and a geometric approach of robustness, is proposed to study complex dynamical systems. It can be implemented for several types of systems, from linear to non linear or hybrid systems. The proposed framework was adapted to a living food system: a ripening model of Camembert cheese to identify the set of states and actions (capture basin) from which it is possible to reach a predefined quality target. Within the set of viable trajectories, particular trajectories that improve the Camembert cheese ripening process are identified using the proposed approach. The results are applied at a pilot scale and are discussed in this paper.     

Effects of perfluoroether concentration and curing protocol on morphology and mechanical properties of toughened TGDDM/MNA resin systems

Previous published work has shown that hydroxyl terminated perfluoroether oligomers can be suitably modified and functionalised to make them miscible with epoxy resins in the uncured state. The reaction conditions can adjusted to induce phase separation either through spinodal decomposition to produce an IPN type morphology, or by nucleation and growth if a dispersed-particle microstructure is required.In the present work we examine the relative toughening enhancement efficiency of the two possible heterophase morphologies. Both systems show a sigmoidal increase in fracture toughness, with increasing concentration of the perfluoroether modifier. However, this takes place at much lower modifier concentrations for the systems with a particulate morphology (about 3.5% w/w) than for IPN systems (about 7.5% w/w). The maximum fracture toughness achievable for the two systems, on the other hand, is very similar and coincides with the concentration at which co-continuous phases are formed.These differences in morphology, however, are not reflected in the variation of modulus and compressive yield strength with increasing concentration of perfluoroether modifier, in so far as both systems exhibit a gradual and small reduction in property with increasing concentration. Furthermore, the dynamic mechanical spectra of the two systems are very different, but the changes resulting from increasing the concentration of toughening agent are relatively small in either case.Nanoindentation tests indicate that it is the local plasticity, brought about by the presence of the softer perfluoroether phase, which is responsible for the enhancement of fracture toughness. This is corroborated by AFM examinations, which reveal local plastic deformations in the regions surrounding the softer particles.     

面向低功耗共享Cache路适应划分算法研究

如何提高多核处理器的性能和降低多核处理器中Cache的功耗已经成为下一代多核处理器的研究热点。为了降低片上多核处理器的功耗,基于路适应算法可以采用一种新的动态划分机制,该机制主要由路分配模块和动态功耗控制模块组成。路分配模块在程序运行过程中根据处理器核所运行线程的工作集的大小调整处理器核所分配的Cache路。动态功耗控制模块利用程序运行的局部性原理,将处理器核所运行线程的工作空间控制在少数Cache路中。关闭剩余的Cache路,从而达到降低Cache功耗的目的。该机制使用Simics全系统模拟平台模拟多核处理器,并用SpecOMP测试集测试了系统的性能和功耗。与传统的Cache(Conventional L2Cache,C-L2)相比,其IPC提高了9.27%,功耗降低了10.95%。