Outcome Pre- and Postexposure Effects: Retention Interval Interacts With Primacy and Recency.

Effects of outcome-alone pretraining and posttraining exposure were investigated in conditioned suppression experiments conducted within a sensory preconditioning preparation with rats. Experiment 1 found that interference by outcome postexposure was stronger than that by outcome preexposure, suggesting a recency effect. Experiment 2 found that after a long retention interval, outcome preexposure produced more interference than outcome postexposure, suggesting a shift from recency to primacy with increasing retention interval. Experiment 3 showed that presentation of a priming stimulus that had been embedded within the earlier phase of treatment also caused a shift from recency to primacy. These results suggest that, at least in a sensory preconditioning paradigm, retrievability of outcome-alone exposure memory is an important determinant of any outcome-alone exposure effect. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A Personalized Defection Detection and Prevention Procedure based on the Self-Organizing Map and Association Rule Mining: Applied to Online Game Site

Customer retention is an increasinglypressing issue in today's competitiveenvironment. This paper proposes a personalizeddefection detection and prevention procedurebased on the observation that potentialdefectors have a tendency to take a couple ofmonths or weeks to gradually change theirbehaviour (i.e., trim-out their usage volume)before their eventual withdrawal. For thispurpose, we suggest a SOM (Self-Organizing Map)based procedure to determine the possiblestates of customer behaviour from pastbehaviour data. Based on this staterepresentation, potential defectors aredetected by comparing their monitoredtrajectories of behaviour states with frequentand confident trajectories of past defectors.Also, the proposed procedure is extended toprevent the defection of potential defectors byrecommending the desirable behaviour state forthe next period so as to lower the likelihoodof defection. For the evaluation of theproposed procedure, a case study has beenconducted for a Korean online game site. Theresult demonstrates that the proposed procedureis effective for defection prevention andefficiently detects potential defectors withoutdeterioration of prediction accuracy whencompared to that of the MLP (Multi-LayerPerceptron) neural networks.     

Use of Poly(methyl methacrylate-co-methacrylic acid) Membranes in the Ultrafiltration of Aqueous Fe3+ Solutions by Complexing with Poly(vinyl pyrrolidone) and Dextran

Abstract

In this study water soluble complexible polymers, poly(vinyl pyrrolidone) (PVP) and dextran, were used for the ultrafiltration (UF) of aqueous Fe⁺³ solutions by using poly(methyl methacrylate-co-methacrylic acid) (PMMA-co-MA) membranes. Effects of polymer concentration and pH on the volume collected in the filtration of Fe⁺³ solutions and percent retentions (R%) were examined. It was determined that increase in polymer concentration decreased the permeability of PMMA-co-MA membrane and pH increased the retention of Fe³⁺ solutions. R% for Fe³⁺ solutions were obtained as 62% and 48% with PVP and dextran respectively at pH 3.0, for a filtration period of 80 minutes and retention for Fe³⁺ solution without using any complex forming polymer was found as 14%. Membranes were characterized by AFM analysis and contact angle measurements.     

Alginate–antacid combinations: raft formation and gastric retention studies

Background: Alginate-based gastroesophageal reflux disease treatments have been used extensively and fall into two main categories. Those containing alginate as the principle active agent and those containing alginate in combination with a significant amount of antacid. Method: The effectiveness of the raft formed by a new alginate/antacid suspension (Gaviscon Double Action Liquid, GDAL), in which calcium carbonate was the main antacid ingredient, was compared with those of existing alginate/antacid suspensions. Result: GDAL had similar raft strength and improved raft resilience than Gaviscon Liquid (GL), and both were significantly greater than five other products tested. Gastric retention of GDAL was similar to that of GL. Conclusion: the in vitro and in vivo performance is maintained in the new GDAL formulation even with higher antacid levels and the product is as good as, or better than, previous formulations.     

Metronidazole-loaded nanostructured lipid carriers to improve skin deposition and retention in the treatment of rosacea

The objective of the present investigation was to improve the skin deposition and retention of metronidazole (MTZ) in rosacea therapy by incorporating it into nanostructured lipid carriers (NLCs). The main challenge in this endeavor was the partial hydrophilicity of MTZ, which mandated careful selection of excipients, including solid and liquid lipids, surfactants, and their ratios in combination. NLCs were produced by the phase inversion temperature method and finally converted into a gel for topical application. The prepared nanoparticles were evaluated for their particle size, zeta potential, entrapment efficiency, solid-state characteristics, surface morphology, in vitro drug release, and permeation through excised skin. The gel was additionally characterized for its pH, drug content, viscosity, and spreadability. The prepared nanoparticles were spherical in shape and of size less than 300?nm. Incorporation of judiciously chosen excipients made possible a relatively high entrapment efficiency of almost 40%. The drug release was found to be biphasic, with an initial burst release followed by sustained release up to 8?hours. In comparison to the plain drug gel, which had a tissue deposition of 11.23%, the NLC gel showed a much superior and desirable deposition of 26.41%. The lipophilic nature of the carrier, its size, and property of occlusion enabled greater amounts of drug to enter and be retained in the skin, simultaneously minimizing permeation through the skin, i.e. systemic exposure. The results of the study suggest that NLCs of anti-rosacea drugs have the potential to be used in the therapy of rosacea.     

Reactivity and deuterium retention properties of titanium-beryllium intermetallic compounds

Beryllium intermetallic compounds (beryllides), such as Be₁₂Ti and Be₁₂V, are the most promising advanced neutron multipliers in demonstration (DEMO) fusion power reactors because of higher stability, lower retention, and swelling. The advanced neutron multipliers are being developed by Japan and the EU as a framework of Broader Approach (BA) activities, targeted at broadening the research fields to not only establish fabrication methods but also for their characterization. Our group has proposed a plasma sintering method for the synthesis of beryllides. When the mixed powder was plasma-sintered at the beginning of the experiment, consolidation of the target composition was so insufficient that single-phase beryllides could not be synthesized. In order to obtain single-phase beryllides, an additional homogenization treatment of the sintered beryllides at 1473 K was necessary, resulting in increased porosity. Using the homogenized powder as the starting material, single-phase Be₁₂Ti and Be₁₇Ti₂ intermetallic compounds were successfully synthesized. As experimental results, the hardness of the compounds was relatively low owing to low sintering density. In addition, the oxidation behavior of the beryllides, when exposed to 15% H₂O/Ar at high temperatures, were investigated and the results indicate the presence, gray colored Be oxide formed on the surface in Be₁₂Ti tested at above 1073 K and Be oxide with a small fraction of white colored Ti oxide even tested at 873 K in Be₁₇Ti₂ phase resulting in the bigger increase of the weight gain than Be₁₂Ti. In addition, this oxidation occurring at lower temperature can be reasoned by the assumption that the existence of BeO (=oxygen content) in Be₁₂Ti (1.95%) and Be₁₇Ti₂ (2.95%) may facilitate increased reactivity. Furthermore, thermal expansion of Be₁₇Ti₂ was found out to be bigger than that of Be₁₂Ti because Be₁₇Ti₂ has more complex crystal structure and higher melting temperature. In terms of deuterium desorption and retention properties, the maximum peaks are detected around 600 K in beryllides, while those in beryllium occur at 800 and 980 K. From the comparison of deuterium retention, it was obvious that Be₁₇Ti₂ has a lower retention than Be₁₂Ti, while Be has the highest value.     

Application of thermophilic temperatures,low hydraulic retention times and high recycling of de-gassed effluent for higher biohydrogen production

This study investigated the external operational factors that would reduce the thermodynamic constrains preventing the simultaneous achievement of high hydrogen productivities (HPs) and hydrogen yields (HYs) in the bioreactor. At hydraulic retention time (HRT) of 1, the maximum HPs and HYs achieved was 35 L H₂/h and 3.91 mol H₂/mol glucose, respectively. At this stage, the bacterial granules occupied approximately 75% of the bioreactor and consisted of the settled biomass density of 40.6 g/L (settled granule bed height = 13.8 cm). The formation of bacterial granules improved the bioreactor performance and resulted in higher substrate conversion efficiency (95%), nutrient influent (7.5 L/h) and de-gassed effluent recycle rates (3.5 L/min). In conclusion, this study demonstrated that high nutrient influent and high de-gassed effluent recycle rates reduced the thermodynamic constrains preventing the achievement of higher H₂ productivities in the bioreactor system.     

Improved analysis of sinigrin in Ethiopian mustard

An ion‐pair reversed‐phase high‐performance liquid chromatography (HPLC) method was developed for the analysis of sinigrin in Ethiopian mustard (Brassica carinata A. Braun) seed and seed fractions. Separation was compared on several RP‐HPLC columns (Inertsil^® ODS‐4 C₁₈ and ZORBAX^® Eclipse XDB‐C₁₈) with an isocratic eluent containing 100% aqueous (aq.) tetramethylammonium bromide (10 mm , pH 5.0). Sinigrin retention was affected by HPLC variables including the type of ion‐pair reagent, buffer strength and pH, acetonitrile concentration, column temperature and eluent flow rate. Partial validation demonstrated this optimised chromatographic condition to be linear, accurate and precise. Multistage extraction using 70% (v/v) aq. methanol was more efficient than 50% (v/v) aq. acetonitrile. In addition, the matrix effect and recovery rate as well as processing efficiency of the analytical protocol were determined. This method is suitable for high throughput analysis of sinigrin in Ethiopian mustard seed and seed fractions.     

The dark side of social networking sites:Understanding phishing risks

LinkedIn, with over 1.5 million Groups, has become a popular place for business employees to create private groups to exchange information and communicate. Recent research on social networking sites (SNSs) has widely explored the phenomenon and its positive effects on firms. However, social networking's negative effects on information security were not adequately addressed. Supported by the credibility, persuasion and motivation theories, we conducted 1) a field experiment, demonstrating how sensitive organizational data can be exploited, followed by 2) a qualitative study of employees engaged in SNSs activities; and 3) interviews with Chief Information Security Officers (CISOs). Our research has resulted in four main findings: 1) employees are easily deceived and susceptible to victimization on SNSs where contextual elements provide psychological triggers to attackers; 2) organizations lack mechanisms to control SNS online security threats, 3) companies need to strengthen their information security policies related to SNSs, where stronger employee identification and authentication is needed, and 4) SNSs have become important security holes where, with the use of social engineering techniques, malicious attacks are easily facilitated.