TMS320 F206定点DSP芯片开发实践

以TMS320F206为例,着重探讨了DSP系统开发过程中的硬件设计与调试、软件设计中的流水线冲突、等待状态设置以及如何利用闪速存储器等相关问题.     

Immobilization of inert TRISO-coated fuel in glass for geological disposal

Vitrification of TRISO-coated gas reactor fuel particles was achieved via two methods: glass melting and sintering. Inert TRISO-coated fuel particles and a borosilicate glass were used. With glass melting at 1200-1300 °C floatation and decomposition of carbon and silicon carbide occurred. Thermal pre-treatment of the particles for oxidation of pyrocarbon did not improve the coating properties of the glass. During cooling most of the particles floated and sorbed on the crucible or mold walls. The sintered glass at 700 °C showed better coating properties of the TRISO-coated fuel particles despite higher porosity compared to glass made by melting. Aqueous leaching properties of glass with particles are similar regardless the mode of fabrication, indicating the good chemical durability of the sintered glass. Sintered glasses may constitute a good technique for TRISO-coated fuel particles immobilization for an eventual deep geological disposal.     

包钢选矿厂降低铁精矿中氟含量的技术攻关

为了降低铁精矿氟含量,通过采取控制磨矿粒度、改进浮选工艺、采用高效捕收剂等措施,使包钢选矿厂铁精矿氟含量由1999年的0.75%降低到2000年的0.65%、2001年的0.58%,为包钢环保工作目标的完成做出了突出贡献.     

Oxygen glow discharge experiment to remove deposited layers and to release trapped hydrogen isotopes in HT-7 superconducting tokamak

An experiment to remove re-deposited layers and to release hydrogen using a glow discharge in oxygen (O-GDC) has been performed in the HT-7 superconducting tokamak. In the absence of magnetic fields, the O-GDC wall conditioning had produced rapid, controlled co-deposit removal. Average removal rates, 5.2 × 10²² H-atoms/h, 5.65 × 10²¹ D-atoms/h and 5.53 × 10²² C-atoms/h, respectively, were obtained during 145 min O-GDC experiment in the pressure range 0.5-1.5 Pa. The corresponding removal rate of co-deposited films was ∼1.19 μm/day (26.5 g/day for carbon) based on an area of 12 m². Compared to thermo-oxidation and O-ICR experiment, high pressure O-GDC wall conditioning promoted the oxidation and improved the C and D atoms removal. In the O-GDC experiment, the removal rates of H-atoms and D-atoms as H₂O, HDO and D₂O were higher than that of H₂ and D₂ by factors of about 20 and 50, respectively. During the 145 min O-GDC experiment, about 14.5% O-atoms were converted into carbon oxides and hydroxides, and about 5.37 × 10²² O-atoms were adsorbed on the walls corresponding to a coverage of 4.5 × 10²¹ O/m² on an wall area of 12 m². In a 100 min helium glow discharge (He-GDC) following the O-GDC experiment, 1.53 × 10²² O-atoms, about 28.5% oxygen retained on the walls, were removed. The removal rate of H-atoms in He-GDC cleaning after O-GDC experiment was lower than that in He-GDC cleaning before O-GDC experiment, which indicates that the O-GDC wall conditioning had effectively reduced hydrogen retention on the walls.     

Influence of growth rate on the structural and morphological properties of TiN, ZrN and TiN/ZrN multilayers

The effect of the deposition rate on the structural and morphological properties of TiN and ZrN single layers and TiN/ZrN multilayers deposited by radiofrequency reactive magnetron sputtering has been studied. The total pressure was kept constant and the growth rate variation was obtained by small difference of nitrogen concentration in the fed gas. The decreasing deposition rate results in a structural change in the thin films from (111) orientation to (100) one. As consequence the surface morphology becomes smoother. Films roughness is strongly related with texture and it decreases with an increase in the (100) X-ray diffraction line intensity. In order to achieve a clear interpretation of our experimental results, the ratio between the N⁺ ions of the plasma and the atoms number reaching the substrate was considered. At high deposition rate with respect to the N⁺ concentration, the chemical potential of transition metal on (100) growth surface is higher than (111) one favouring the (111) orientation of the films. On the contrary, when the growth rate is low with respect to the nitrogen concentration, the chemical potential of transition metal on (111) growth surface is higher than the (100) one leading to a preferential growth in the (100) direction.     

源气体流量比对F-DLC薄膜结构的影响

以高纯石墨作靶，CHF3/Ar作源气体采用反应磁控溅射法制备出了氟化类金刚石（F-DLC）薄膜。拉曼光谱表明，CHF3相对流量的增加会引起薄膜的D峰与G峰强度之比I（D）/I（G）减小，晶粒增大，芳香环结构出例下降。红外吸收光谱分析证实了这些推论，指出这是由于薄膜中氟含量上升的结果。     

Two Isomers of C60F48: Computed Inter-isomeric Equilibrium

C₆₀F₄₈ has been known to exist in two isomeric forms of D₃ and S₆ symmetries. However, the quantum-chemical calculations have not agreed on their stability order though a near-isoenergetic picture is otherwise always encountered. In order to clarify the situation, the entropy effects are evaluated for synthetic temperatures of about 500K. The entropy evaluations suggest that the D₃ isomer should be more stable in the potential energy by 2.05-2.55 kcal/mol (to which term the ab initio data are closer than the semiempirical ones).     

基于PCI总线和DSP技术的生物芯片测控与采集系统

本文在介绍激光共聚焦生物芯片扫描仪结构原理基础上，论述了基于DSP的PC测控采集技术、基于PCI总线的PC与DSP通信技术等关键技术。     

试谈高炉冷却壁的检漏及维护

高炉冷却壁的检漏及维护，是炼铁工作者十分关心的问题，本文针对邯钢高炉具体情况，探讨了高炉冷却壁漏水的原因，检漏方法，漏水冷却壁的维护及预防措施。     

包钢氟污染治理成效及对策

本文介绍了包钢历年来氟污染治理成效以及控制外排氟总量达标的具体措施.