Quasi-Chun-Ching Shih''''s Fractional Fourier Transform with Periodicity of 2,3 and M

Based on Chun-Ching Shih's idea, the basic transform was substituted and the quasi-ChunChing Shih's fractional Fourier transform with periodicity of 2, 3 and M was deduced. The two former transforms and the Chun-Ching Shih's fractional Fourier transform were only the particular cases of quasiChun-Ching Shih's fractional Fourier transform with periodicity of M.     

图象中心加权中值滤波的改进与应用

中心加权中值滤波具有较好的边缘保持特性及快速实现的特点，但滤噪能力低于其它中值滤波。此文探 讨对中心加权中值滤波的改进方法，提出了中心加权分级实现的思想，使之同时具有边缘保持、快速滤波和噪声去 除的理想效果。     

An automatic torque ripple compensation system for direct drive motors

A serious problem in motion control is the occurrence of torque ripple. Since a direct drive (DD) motor with a magnet rotor uses a rare-earth magnet, the torque ripple is more serious than that of conventional servomotors. This paper presents an auto-compensation of torque ripple using a software-implemented torque observer. The frequency and amplitude of torque ripple can be obtained in the controller by using the estimated torque from an observer, and the autonomous generation of a compensating current component for a torque ripple is possible. The proposed algorithm has been verified by experiments.     

小波分析及其在时变滤波和信号分离中的应用

利用小波变换具有的多时频分辨率特性，对地震勘探和测井信号这类非平衡信号进行分析，可以充分利用信号的时间－频率特性。文中介绍了小波变换的基本概念及其在地震勘探信号的时变滤波和声波全波列测井信号的信号分离中的应用，实例表明，小波变换在地球物理信号中具有广阔的应用前景。图５参７     

Comments on the shortcomings of predicting the precision of Cavalieri volume estimates based upon assumed measurement functions

It is well known that the estimation of an object's volume by means of serial cross-sections, the so-called Cavalieri method, yields an unbiased estimate. But by itself it provides no means by which to estimate how precise this estimate is unless the shape of the volume is fully known beforehand. This knowledge can only be partially determined from the serial section information that is collected. Methods have been developed that claim to surmount this difficulty by using the serial section data to create a mathematical model of the volume's shape properties. The model then is used to estimate (predict) the precision of the volume estimate (its CE) from the single set of data available. Unfortunately, the theory underlying the model is flawed and so the model itself amounts to no more than an unsubstantiated guess about the shape of the volume. Therefore, the precision of the volume estimates that one obtains from the method is only as good as the model and this cannot be ascertained from the single set of acquired data. In this letter I explain the inadequacies of the modelling method. I suggest that it be used only with caution, if at all. Instead I suggest two alternative ways to predict the CE, one that is based upon a rule-of-thumb approach to the object's shape, and another that is based upon spectral analysis of the measurement function and that is easy to implement with available computer software.     

A fictitious domain decomposition method for the solution of partially axisymmetric acoustic scattering problems. Part I: Dirichlet boundary conditions

We present a fictitious domain decomposition method for the fast solution of high‐frequency acoustic scattering problems characterized by a partially axisymmetric sound‐soft scatterer. We apply this method to the solution of various mockup submarine problems, and highlight its computational advantages and intrinsic parallelism. Copyright © 2002 John Wiley & Sons, Ltd.     

基于地震道时频分析的地层结构解析原理和方法

 地震时频分析是通过对地震信号采用多种数学变换，实现从时频域角度对信号的局部特征进行分解，剖析信号细微特征所对应的地层结构。在应用地震时频分析技术过程中，人们对于这项技术能否真正有效地解决实际地质问题存在许多争论。本文从时频原理综合分析的角度出发，对地震道时频谱中各种频率特性参数和时频旋回直接转化成对地层结构逐级、分步的解析方法进行了较深入的探讨。研究认为时频分析原理不仅是对地震数据进行特殊数学变换，实现对信号的分解，而且充分利用了地层厚度的调谐效应及岩性调谐效应；时频谱与地质结构特征之间的良好响应关系为地震地质精细解释提供了直观的依据。     

X射线衍射线形Fourier变换

采用计算机辅助实验技术，研究X射线衍射线开在仪器宽化修正过程中Fourier系数变化的规律及其影响，结果表明，只要实测线形接近Gauss 分布，Fourier变换就会导致弯勾效应；Forier变换可引起真实线形的尾部波动及大于实际值的宽化，引入边界条件可予以消除，Kα双线形经过Fourier变换后，Fourier纱数与真实Fourier系数存在着一定的差异。通过真实线形的Fourier变换可以修正。     

A fictitious domain decomposition method for the solution of partially axisymmetric acoustic scattering problems. Part 2: Neumann boundary conditions

We present a fictitious domain decomposition method for the fast solution of acoustic scattering problems characterized by a partially axisymmetric sound‐hard scatterer. We apply this method to the solution of a mock‐up submarine problem, and highlight its computational advantages and intrinsic parallelism. A key component of our method is an original idea for addressing a Neumann boundary condition in the general framework of a fictitious domain method. This idea is applicable to many other linear partial differential equations besides the Helmholtz equation. Copyright © 2003 John Wiley & Sons, Ltd.     

Linked influence of pH and cations on fatty-acid monolayer integrity related to high-quality Langmuir-Blodgett films

This study shows the connection between the morphological structure of transferred films and the chemical composition of the monolayer before transfer. The stability of a behenic acid monolayer depends on the linked influence of the type of cation and of the pH value in the aqueous subphase. The stability of the monolayer is assessed by the expansion of the solid-packed state and by the relaxation time. Its integrity is characterized by the number of crystal defects which appear in transferred Langmuir-Blodgett (LB) films as seen through Nomarski microscope observations. Both stability and integrity are greatly improved when Cd²⁺ or Mn²⁺are added to the subphase at pH 5.75 and 6 respectively. In these conditions, the transfer is very efficient and the LB films thus obtained are of very high quality. The pH values of the subphase at which the molecules of behenic acid are transformed into bivalent salts differ significantly according to the nature of the cation involved. Comparing infrared spectra of the LB films, it appeared that the relative amount of acid/salt found in the monolayer was practically the same with a subphase containing either Cd²⁺ at pH 5.75 or Mn²⁺ at pH 6. This suggests that the ratio of acidic and salt forms would be a key parameter for obtaining high-quality LB films.