Homogenization of hardness distribution and distortion in high pressure gas quenching

Quenching with gases rather than oil or other liquid media has the advantages of reducing the risks concerning health and environment, while simultaneously homogenizing the quenching results and minimizing distortion due to a wide range of possible process parameter variations and the pure convective heat transfer. In this contribution, a coupled solution for increasing homogenization of quenching results within high pressure gas quenching will be presented. In the first stage, an experimental test facility was set up for flow investigations and in the second stage a numerical simulation model was generated. The numerical and experimental results of the flow through the chamber were compared for several boundary conditions. Finally, after complete verification of the simulation, the model may be used to assist in parameter variation for optimization of homogeneous high pressure gas quenching.     

钢板侵彻过载的三维数值模拟

利用LS—DYNA有限元程序，用弹塑性模型建立材料模型，对高速弹丸侵彻均质钢板问题进行了数值模拟，并与测试结果进行了比较，说明了有限元分析的有效性，为引信设计提供参考。     

Using rainbow net simulation to measure fault tolerance in a multiprocessor

The Rainbow net simulation technique is applied to modelling the impact of system load and fault handling on the availability of a fault-tolerant multiprocessor architecture. Rainbow nets are described along with the motivation for creating this modelling technique. A Rainbow net fault-handling model is created for the fault-tolerant multiprocessor architecture and the topology is shown to remain constant in size, independent of the number of processor, memory and I/O elements configured in the system. Simulation is performed with a varying load in terms of the number of active jobs the system must support. Results are given showing how the fault-tolerant capability varies with load. Two new metrics for evaluating fault tolerance are introduced; namely full fault-tolerability and partial fault-tolerability. They are based on simple observations in the model.     

基于EWB的D/A数模转换器的仿真研究

阐述了D／A转换器的仿真原理，给出了T形电阻网络D／A转换器仿真模型的构造方法，并采用EWB进行了系统仿真，仿真结果表明该方法是合理、可行的。     

High-k材料MOS器件的PISCES-II模拟

High-k材料是指介电常数k高于SiO2的材料。使用high-k材料做栅绝缘层,是减小MOS器件栅绝缘层直接隧道击穿(DirectTunneling,DT)电流的有效方法。文章在二维器件模拟软件PISCES-II中添加了模拟以high-k材料为栅绝缘层的MOS器件模型,并对SiO2和high-k材料的MOS晶体管器件特性进行了模拟比较,成功地验证了所加high-k材料MOS器件模型的正确性。改进后的PISCES-II程序,可以方便地对以各种high-k材料为栅绝缘层的器件性能进行模拟。     

PCR芯片和生化微分析系统

介绍了PCR微芯片的最新研究进展,给出了不同结构的PCR芯片设计原理以及特点,介绍由PCR芯片为主要单元的集成微全分析系统的相关研究,同时简要介绍了对PCR的仿真模拟等。     

变频器的常见故障分析

本文阐述了变频器的常见故障，并针对常见故障提出了解决措施。     

Effects of Process Conditions on Desalting and Demetalization of Crude Oil

The efficiency of desalting for six crude oils was studied with a SY-1 dynamic simulation experimental installation. The demulsifier DC2 was examined for 1#, 2#, and 4# crude oil and DC4 was used for 3#, 5#, and 6# crude oil. The effects of temperature, electric field gradient, dosage of demulsifier, and washing water on the desalting efficiency of six crude oils were investigated. The results showed that at the optimization process condition after desalting, the desalting efficiency and the salt content of 1# crude oil reached 89.17% and 1.92 mg/L; that of 2# crude oil reached 85.08% and 1.04 mg/L; that of 3# crude oil reached 91.06% and 1.35 mg/L; that of 4# crude oil reached 81.67% and 1.51 mg/L; that of 5# crude oil reached 81.03% and 2.32 mg/L; and that of 6# crude oil reached 86.64% and 2.67 mg/L. Different crude oils have different metal contents. Three assistants, ammonium nitrate (TJ1), nitric acid (TJ3), and polyamine carboxylate (TJ4), were used to improve the efficiencies of desalting and demetalization of six crude oils. TJ4 was more efficient in removing calcium and iron for 1# and 2# crude oil. TJ1 was more efficient in desalting and demetalizing 5# crude oil. The efficiencies for removal of calcium, iron, nickel, and vanadium respectively reached 99.89%, 98.33%, 20.58%, and 43.02%. TJ3 has better efficiency desalting and demetalizing for 6# crude oil. With the concentration of TJ3 increasing from 0 to 80 mg/L, the desalting efficiency increases from 31.22% to 73.54%, and the iron removal efficiency increases from 56.0% to 74.05%.     

热焊弯管用钢板工艺探讨

在统计分析、正交多项式回归和模拟试验的基础上，建立了高精度的屈强比预报模型，并运用多元函数极值原理，求导极值点及相应的工艺参数，为优化工艺制度，提高热焊弯管用钢(L360-WG系列)性能合格率提供了定量依据。     

一种网络服务自动部署方法

为满足网络服务使用者对网络服务部署的功能性和非功能性需求,运用Petri网的方法进行了互联网动态多变环境下的网络服务自动部署的研究,建立了一种基于Petri网的网络服务部署网模型,从形式化的角度描述了网络服务功能的部署情况,提出了一种按照服务质量来选择最优网络服务部署的算法。仿真的结果表明,与目前常用的固定部署算法和随机部署算法相比,按照该方法得到的网络服务部署能最好地满足服务使用者对服务的非功能性方面的需求。