不锈钢冶炼用不烧镁钙砖的研制及应用

介绍了冶炼不锈钢用不烧镁钙砖的研制过程及其在冶炼不锈钢的 90tAOD炉炉帽和 90t装入包包底的应用情况。结果表明 :在 90t装入包包底的使用寿命达 1 1 0次 ,最大侵蚀速度仅为 1 .50mm·次 -1 左右 ;在 90tAOD炉炉帽上的使用寿命达 2 1 7次 ,最大侵蚀速度仅 0 .55mm·次-1 ,但存在裂纹和剥落现象 ,今后应改进砖型设计 ,增加调整砖 ,以消除砌缝 ,提高衬砖的整体性和稳固性     

基于LT3182和LC3282的429总线收发装置

为了实现对用户需求的快速响应,设计了以L89C51RD2为核的系统板。对于LT3182和LC3282的功能进行演示和测量,并能够检测产品参数指标。实践证明,该板能够演示LT3182和LC3282的各项功能,并能够满足现场分析需求。     

基于AMBA总线的IIC协议IP核设计与验证

介绍了一种基于AMBA总线verilogHDL实现的IIC主机模式的IP核设计。该模块能够在标准和快速模式下运行,能够灵活配置为十位地址寻址或七位地址寻址模式。详细说明了该IP核的架构,各部分设计及状态转换过程。最后该模块通过了系统验证,并在xilinxFPGA上转化为硬件电路实现了所有功能。     

图形处理器片段处理单元的设计与实现

针对图形处理器三维引擎中对图形的后期处理需求,实现片段写入帧缓冲区前的测试、混合、逻辑操作、累积、清除和屏蔽等关键功能。分析并提取了OpenGL核心库中的片段处理相关函数,确定了片段处理单元要实现的功能;合理安排多个片段处理功能的执行顺序,设计了基于流水线的片段处理单元结构;采用Verilog HDL对电路进行描述,采用 Cadence NC-Verilog 仿真工具进行虚拟验证,采用 Xilinx 的 ISE 工具进行综合,并在 Xilinx Virtex6 XC6VLX760 FPGA上进行原型验证,电路工作频率可以达到180 MHz,测试功能正确。在SMIC 65 nm CMOS工艺下,采用Synopsys Design-Compiler对设计进行综合,电路工作频率达到300 MHz,满足设计需求。     

Self-aligned fabrication of single crystal diamond gated field emitter array

This paper describes a self-aligned fabrication process for diamond gated field emitter array (FEA). Utilizing the non-conformal coverage sputtering conditions of silicon oxide, an interesting “sphere on cone” structure is formed on diamond nano tip array, which is the key point of gate hole opening process. This structure causes shadowing at certain regions of side-wall during Ti / Au gate metal deposition. Removal of “sphere” by wet etching leads to the successful fabrication of a single crystalline diamond gated FEA. Scanning electron microscope observations reveal the fabrication of a uniform emitter array with tip radius of curvature (20 nm) and gate hole (1.4 μm). We also confirmed that no noticeable physical damage exists on tip. In field emission characteristics of the fabricated single crystal diamond gated FEA, gate voltage control of field emission current is realized.     

Electrophoretic deposition of carbon nanotubes

Electrophoretic deposition (EPD) has been gaining increasing interest as an economical and versatile processing technique for the production of novel coatings or films of carbon nanotubes (CNTs) on conductive substrates. The purpose of the paper is to present an up-to-date comprehensive overview of current research progress in the field of EPD of CNTs. The paper specifically reviews the preparation and characterisation of stable CNT suspensions, and the mechanism of the EPD process; it includes discussion of pure CNT coatings and CNT/nanoparticle composite films. A complete discussion of the EPD parameters is presented, including electrode materials, deposition time, electrode separation, deposition voltage and resultant electric field. The paper highlights potential applications of the resulting CNT and CNT/composite structures, in areas such as field emission devices, fuel cells, and supercapacitors.     

临盘油区复杂断块油藏有效的开发治理技术

针对临盘油区地质条件的复杂性和开发调整的困难度,本文阐述了复杂断块油藏开发治理技术的应用,如精细地质研究技术、剩余油研究技术以及改善水驱油效果的注采调整技术等。精细地质研究技术深化了对油藏的认识程度;剩余油研究技术深化认识不同类型油藏剩余油分布规律,明确了注采调整方向;针对不同类型油藏具有的不同潜力,创新注采调整思路,不断优化注采井网,改善了油藏的开发效果。     

Imaging and probing catalytic surface reactions on the nanoscale: Field Ion Microscopy and atom-probe studies of O2–H2/Rh and NO–H2/Pt

We present dynamic studies of surface reactions using video-Field Ion Microscopy (FIM) along with Pulsed Field Desorption Mass Spectrometry (PFDMS). Catalytic water formation is followed using rhodium and platinum 3D field emitter crystals for the oxidation of hydrogen with either oxygen (Rh) or NO (Pt). Strongly non-linear dynamics are observed with nanoscale spacial resolution. For both reactions quasi-oscillatory behaviour exists under certain conditions of temperatures and partial pressures. An influence of the probing electric field is observed and possibly essential in establishing oscillatory behaviour. Local chemical probing of selected surface areas with up to 400 atomic surface sites proves catalytic water formation to take place. Since water ions (H₂O⁺/H₃O⁺) cause image formation of the O₂–H₂ reaction on Rh, respective videos provide space-time resolved information on the catalytically active sites. Atom-probe data also reveal that the surface of the Rh sample reversibly switches from a metallic to an oxidized state during oscillations. As to the NO–H₂ reaction on Pt, fast ignition phenomena are observed to precede wave fronts. After catalytic water formation, NO molecules diffuse into emptied areas and cause high image brightness. Depending on the size of the Pt crystal, the reaction may ignite in planes or kinked ledges along the <100> zone lines. Thus FIM provides clear experimental evidence that kinks are more reactive than steps in the catalytic NO + H₂ reaction. Pt surface oxidation occurs and has probably been underestimated in previous FIM studies.     

基于SOA的智能航运数据服务平台研究

为了实现全国范围的内河航运数据共享,提高我国内河航运的管理水平,需要一种稳定可靠、松耦合的数据共享方式。针对当前的内河航运数据共享需求,并根据当前我国各省的内河航运信息化建设的实际情况,参考国内外成熟的理论基础,提出了基于SOA的数据共享体系,从而实现多节点的关键数据实时共享的应用场景。通过这种方式可以实现内河航运数据共享服务,满足航运信息服务的要求,并适应今后不断增长的共享节点及共享压力。     

基于C-V模型和MRF的脑部MRI分割

为准确分割脑部磁共振图像(MRI)的灰质、白质和背景,提出一种基于C-V模型和马尔可夫随机场的全自动分割方法。采用C-V模型与形态学相结合的方法对脑MRI进行预处理,去除多余脑组织,获得待分割图像。引入灰度场局部熵的思想对惩罚因子进行估计,利用马尔可夫随机场模型建模实现脑灰白质的分割,并运用形态学方法获得最终分割结果。对96幅IBSR图像和46幅临床图像进行实验,结果表明,该方法能够实现脑部MRI灰白质的全自动分割,且具有较好的分割精度和较快的处理速度。