轴对称问题线元上分布奇点的诱导速度势和诱导速度

本文给出轴对称问题线元上高次分布源和偶极在无界域中的诱导速度势和诱导速度的计算公式,可供用分布奇点法求解轴对称势流问题时参考.     

注高温热水管线缓蚀,阻垢实验研究

针对辽河油田高凝油区块注高温热水(85—95℃)引起的腐蚀、结垢,开展了室内和现场缓蚀、阻垢试验;分析了不同温度下注水的腐蚀情况,对比、考察了不同的缓蚀剂、阻垢剂及其复配物,得出了如下认识:在注高温热水条件下直接采用常温下使用的防腐蚀、防垢方法是不可行的,必须有针对性地进行高温条件下防腐蚀、防垢的实验研究工作。     

克拉2气田储层岩石的应力敏感性及其对生产动态的影响

克拉2气田是一个异常高压气藏，压力系数在2．0以上。在衰竭式开采条件下，其地层压力降幅可为普通气藏地层压力降幅的3倍以上，因此研究储层岩石应力敏感性及其对生产动态的影响意义重大。研究得出，岩石的应力敏感性特征主要有：岩石物性对应力的敏感性总体上不大，其中以孔隙度最小，渗透率次之，压缩系数最大；岩石物性随地层压力的下降而下降；在同一地层压降下．岩石物性下降幅度不是渗透率的连续函数，而是与渗透率分布范围有关，高渗透率范围，岩石物性下降幅度小，低渗透率范围，岩石物性下降幅度大。研究得出，克拉2气田岩石的应力敏感性对其生产动态的影响较小。     

准噶尔盆地三台-北三台地区第三系勘探潜力分析

从沉积及储层组合、油气运移系统等方面全面剖析了准噶尔盆地三台-北三台地区第三系油气成藏条件，建立了成藏模式，对未钻探区勘探潜力进行了预测；通过分析，认为该区第三系储层物性主体差，断裂更多地表现为封闭性，导致沟通深部油气源的运移体系不畅，致使第三系圈闭不能有效捕获和储集油气。圈闭又比较匮乏，主体勘探潜力不大。北25井西背斜紧邻多期活动的甘诃子北断裂，第三系可能发育较好的储层，相对有利，北25井西背斜应是钻探第三系的首选目标。     

现场总线技术的特点及其在热电站的应用

阐述了现场总线技术的含义、主要特点和优点,对比了现场总线控制系统与DCS系统的区别,介绍了现场总线技术在洛阳石化分公司热电站的典型应用及其发展前景。     

New approach to enhance adhesions between carbon nanotube emitters and substrate by the combination of electrophoresis and successive electroplating

Complementary electroplating combined with electrophoresis enhanced the field emission characteristics of emitters by improving the adhesions between CNT emitters and substrate. The emitting current of the CNT emitters prepared by our combined method increased nine times higher than that of CNT emitters prepared by electrophoresis only, since electroplating improved the adhesion of CNT emitters. During the life-time measurement for 10 h, the emitting current of CNT emitters fabricated by electrophoresis only was drastically decreased to 13% of the initial current, while that prepared by the combination of electrophoresis and successive electroplating decreased to 64% of the initial current. We suggest that our method is a promising approach for the efficient fabrication of reliable CNT emitters.     

On the Locus of Speed-Accuracy Trade-Off in Reaction Time: Inferences From the Lateralized Readiness Potential.

Lateralized readiness potentials (LRPs) were used to determine the stage(s) of reaction time (RT) responsible for speed-accuracy trade-offs (SATs). Speeded decisions based on several types of information were examined in 3 experiments, involving, respectively, a line discrimination task, lexical decisions, and an Erikson flanker task. Three levels of SAT were obtained in each experiment by adjusting response deadlines with an adaptive tracking algorithm. Speed stress affected the duration of RT stages both before and after the start of the LRP in all experiments. The latter effect cannot be explained by guessing strategies, by variations in response force, or as an indirect consequence of the pre-LRP effect. Contrary to most models, it suggests that SAT can occur at a late postdecisional stage. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of functionalization and boron and nitrogen substitution on some properties of carbon nanotubes

Molecular orbital calculations of the ionization potential of single wall carbon nanotubes having donor NH₂ and acceptor NO₂ groups bonded to the side walls and ends and boron and nitrogen substituted for carbon show substantial increases in ionization potential compared to carbon nanotubes with no functional groups and no carbon substitutions. The presence of a carbon vacancy on the side wall also causes a substantial increase in the ionization potential. The effect of tube length on the ionization energy is also calculated. The calculations also suggest that at appropriate levels of boron and nitrogen doping the armchair carbon nanotubes could be high temperature organic ferromagnetic materials.     

Streaming potential measurements on stainless steels surfaces: evidence of a gel-like layer at the steel/electrolyte interface

Electric charges at the surface of a passive stainless steel are generally considered as concentrated either in the passive film itself, or at the metal/passive film interface, or in the electrical double layer at the film solution interface. Rest potential time dependence after immersion of a passive surface in aqueous electrolytes suggests however that slow processes occur in the onset of the surface charge. Specific experiments, such as streaming potential measurements and electrochemical impedance spectroscopy in a thin electrolyte cell, were carried out for understanding better this phenomenon. An AISI 304 type austenitic stainless steel with polished or bright annealed surface finishes was immersed in NaCl aqueous solutions with various pH and chloride concentrations. The streaming potential time evolution shows two steps: a first rapid one (∼2 min) is attributed to the onset of the surface charge. The second step is much slower (approximately several hours) and possibly due to an interphase layer between the passive film and the solution. Following this idea, the whole kinetics is controlled by cation migration across the interphase when the pH is larger than the isoelectric pH (pH_iep), while chloride ions are incorporated in the interphase when pH < pH_iep. Impedance measurements allow determining both the kinetics of charge transport and the thin cell conductivity. When glass is used as reference material for the cell walls instead of stainless steel, the Nyquist plots show a high-frequency response. For stainless steel cell walls, a low-frequency response is observed, attributed to a slow charge reorganisation inside the interphase layer. The charge distribution at metal/electrolyte interface is discussed in terms of a gel-like layer which possibly takes place at the passive film/electrolyte interface.     

西南油气田建设用地面临的困难及其对策

从四川盆地油气勘探开发建设用地特点入手,分析了西南油气田用地现状和新形势下油气勘探开发建设用地在保证工期、控制成本、提高效率、政策支持、关系协调等方面所面临的挑战,提出了下一步为保证生产建设用地按时、有效、科学、合理、合法的取得而应采取的有效措施。