Adsorption and inhibitive properties of benzimidazole derivatives in acid mild steel corrosion

Eight diazoles were investigated as corrosion inhibitors of mild steel in 1 M hydrochloric acid using gravimetric and polarization techniques. It was found that the inhibition efficiency increased with the increase of organic substrate concentration, while the adsorption followed the Frumkin isotherm. A correlation between the electronic parameters (induction and mesomeric effects of the substituents, ionization potential values) as well as those of the chemical structure (molecular area) of diazoles molecules and their inhibiting properties was looked for. The results obtained show that a definite interdependence exists but it is not as simple and straightforward as might be expected.     

剩余油分布及其挖潜研究综述

介绍了国内外剩余油分布的研究现状，从微观规模和宏观规模2个角度对剩余油研究技术进行了综述，微观规模常用的研究技术主要有物理模拟、计算机模拟等，宏观研究常用技术有测井解释、三维地震、流动单元划分等。认为不同的地质环境和开发方式会导致不同的剩余油分布模式，不同油田、不同区块分布模式不同。影响剩余油分布的主要因素中，储层因素是内在的，开发因素是外在的。概括介绍了我国部分油田剩余油挖潜的一些常用技术，认为应主要从改善储层非均质性的地质角度和调整注采状况的开发角度入手，采用动态、静态结合和多学科结合的方法挖潜剩余油。     

Organic geochemistry of heavy/extra heavy oils from sidewall cores, Lower Lagunillas Member, Tia Juana Field, Maracaibo Basin, Venezuela

The study of 22 oils from sidewall cores taken at different depths in the Lower Lagunillas Member, well LSJ-AB, Tia Juana Field, Maracaibo Lake is presented, with the purpose of predicting the intervals that present the best crude oil quality. Differences were detected in the biodegradation levels of the studied samples, which are correlated with the depth at which the sidewall core was taken. The API gravity was considered for the oils from each sidewall core and it was found that toward the top of the sequence, the oils have an API gravity of 10.6-11.2°, while toward the base part of the sequence, the well produces extra heavy oils with an API gravity that varies between 8.2 and 8.7°.     

松辽流域初始水权分配中确定政府预留水量的研究

介绍了松辽流域水权初始分配中政府预留水量问题的系统研究。首先给出了政府预留水量的确定原则和预留优先级，然后提出一种政府预留水量双侧耦合分析方法，通过政府预留水量的需求与可能两个侧面，采用“自下而上”的预留需求与“自上而下”的可预留水量双侧耦合分水模式。通过大量的分析和计算，得出了松辽流域不同水平年、不同频率的政府预留水量。分析和应用结果表明，该方法是可行的，可为流域初始水权分配提供一种有效的技术方法。     

注高温热水管线缓蚀,阻垢实验研究

针对辽河油田高凝油区块注高温热水(85—95℃)引起的腐蚀、结垢,开展了室内和现场缓蚀、阻垢试验;分析了不同温度下注水的腐蚀情况,对比、考察了不同的缓蚀剂、阻垢剂及其复配物,得出了如下认识:在注高温热水条件下直接采用常温下使用的防腐蚀、防垢方法是不可行的,必须有针对性地进行高温条件下防腐蚀、防垢的实验研究工作。     

克拉2气田储层岩石的应力敏感性及其对生产动态的影响

克拉2气田是一个异常高压气藏，压力系数在2．0以上。在衰竭式开采条件下，其地层压力降幅可为普通气藏地层压力降幅的3倍以上，因此研究储层岩石应力敏感性及其对生产动态的影响意义重大。研究得出，岩石的应力敏感性特征主要有：岩石物性对应力的敏感性总体上不大，其中以孔隙度最小，渗透率次之，压缩系数最大；岩石物性随地层压力的下降而下降；在同一地层压降下．岩石物性下降幅度不是渗透率的连续函数，而是与渗透率分布范围有关，高渗透率范围，岩石物性下降幅度小，低渗透率范围，岩石物性下降幅度大。研究得出，克拉2气田岩石的应力敏感性对其生产动态的影响较小。     

准噶尔盆地三台-北三台地区第三系勘探潜力分析

从沉积及储层组合、油气运移系统等方面全面剖析了准噶尔盆地三台-北三台地区第三系油气成藏条件，建立了成藏模式，对未钻探区勘探潜力进行了预测；通过分析，认为该区第三系储层物性主体差，断裂更多地表现为封闭性，导致沟通深部油气源的运移体系不畅，致使第三系圈闭不能有效捕获和储集油气。圈闭又比较匮乏，主体勘探潜力不大。北25井西背斜紧邻多期活动的甘诃子北断裂，第三系可能发育较好的储层，相对有利，北25井西背斜应是钻探第三系的首选目标。     

现场总线技术的特点及其在热电站的应用

阐述了现场总线技术的含义、主要特点和优点,对比了现场总线控制系统与DCS系统的区别,介绍了现场总线技术在洛阳石化分公司热电站的典型应用及其发展前景。     

非洲油气勘探区战略选择建议

非洲不同类型的沉积盆地主要可归纳为：古、中生代挠曲盆地，中、新生代大陆边缘断陷盆地，板内裂谷盆地和大陆边缘进积三角洲盆地。通过盆地油气成藏条件地质综合评价、不同勘探阶段的类比和最终勘探潜力分析，对非洲的沉积盆地进行了划分，在此基础上，总结出非洲油气勘探区选择应遵循的原则。对于油气勘探长期战略选区，原则上，优选低成本油气远景区，即使存在高风险，但亦可获得高回报；对于油气勘探中期发展策略选区，应该寻找地质条件好的油气资源区，投资中短期高利润项目；对于油气勘探中短期发展策略选区，一般应优选中低成本、低风险、低利润且短期能获得油气发现和勘探突破的有利油气勘探区。图1表3参5     

New approach to enhance adhesions between carbon nanotube emitters and substrate by the combination of electrophoresis and successive electroplating

Complementary electroplating combined with electrophoresis enhanced the field emission characteristics of emitters by improving the adhesions between CNT emitters and substrate. The emitting current of the CNT emitters prepared by our combined method increased nine times higher than that of CNT emitters prepared by electrophoresis only, since electroplating improved the adhesion of CNT emitters. During the life-time measurement for 10 h, the emitting current of CNT emitters fabricated by electrophoresis only was drastically decreased to 13% of the initial current, while that prepared by the combination of electrophoresis and successive electroplating decreased to 64% of the initial current. We suggest that our method is a promising approach for the efficient fabrication of reliable CNT emitters.