场发射显示器支撑墙机械强度的计算与分析

计算了几种不同材料支撑墙在不同承压和允许倾斜角度范围内的应力和形变分布。计算结果表明 ,采用热压氮化硅或氧化锆陶瓷制作的支撑墙具有足够高的机械强度 ,是支撑墙材料的较好选择。     

Effect of variable friction coefficient on sheet metal drawing

A variable friction model that relates the parameters of sheet metal drawing to the local lubrication conditions taking place during the deformation, has been integrated to a finite element program. Variable friction coefficients for the contacting surfaces are determined from the friction model, which uses the related parameters obtained at each time step of the finite element program as inputs. A number of numerical runs have been performed and the strains are compared with the experimental results for circular blanks. A good agreement is obtained between the numerical and experimental results for the variable friction model used.     

A new Thermo-viscoplastic Material Model for Finite-Element-Analysis of the Chip Formation Process

A new material model for describing the thermo-viscoplastic flow behavior of workpiece material in metal cutting is presented. In order to express the complex flow behavior which depends on the local strain, strain rate and temperature, a new methodology for sequential formulation is proposed. The material parameters which are achieved by using the flow stress data available at low strain rates are enhanced by matching the results of the experimental investigations and finite element simulations of the orthogonal cutting process. As a result, a material model which has a wide validity range of strain, strain rate and temperature is established.     

A mesomodel for the numerical simulation of the multiphasic behavior of materials under anisothermal loading (application to two low-carbon steels)

The determination of residual stresses induced by welding or heat treatment operations requires the use of complex models taking into account thermal, metallurgical and mechanical phenomena. In this paper, we propose a mechanical model in which each phase can follow its own constitutive law. This model also takes into account phase transformation plasticity, which is treated independently of the behavior of each phase. This model has been implemented into the French FEM code Castem 2000. The interest of the proposed method is that it allows one to mix any type of nonlinear behavior using Taylor homogenization hypothesis. There is no need to develop a theory to get the equations of the homogenized material law. Two numerical examples demonstrate the efficiency and the flexibility of this approach. The results obtained are compared to experimental values for a typical welding situation and a high-temperature response. This comparison seems to indicate that viscous effects in the materials have a significative influence on the residual stresses produced by welding.     

Numerical simulation model of vibration responses of rectangular plates embedded with piezoelectric actuators

A numerical simulation model for random large amplitude vibration control of composite plate using piezoelectric material is presented. The H_∞ control design is employed to suppress the large amplitude vibrations of composites plates under random loading. The numerical simulation model is developed and based on the finite element method. The finite element governing equation includes fully coupled structural and electrical nodal degrees of freedom, and consider the von Karman large amplitude vibration. The modal reduction method using the structural modes is adopted to reduce the finite element equations into a set of modal equations with fewer degrees of freedom. The modal equations are then employed for controller design and time domain simulation. In the simulations without control, the value of the linear mode to the nonlinear deflection is quantified; and the minimum number of linear modes needed for accurate model is obtained. In the simulations with control, it is shown that the truncated modes, which are neglected in the control design, deteriorate the controller performance. Generally, the vibration reduction level is not monotonically increasing with the size of the piezoelectric actuator. The optimal piezoelectric actuator size depends on the excitation level. For higher excitation level, optimal actuator size is larger. The H_∞ controller based on the linear finite element formulation gives better vibration reduction for small amplitude vibration, but it still gives reasonable performance for large amplitude vibration provided that the piezoelectric actuator is big and powerful enough.     

Thermal shock and thermal fatigue study of ceramic materials on a newly developed ascending thermal shock test equipment

A test equipment was designed to study thermal shock and thermal fatigue of ceramic materials subjected to fast heating (ascending). The equipment was designed to generate thermal stress in a test specimen by heating one surface of it by an oxy-hydrogen flame while cooling the opposite surface. The sample cracked when thermal stress exceeded its mechanical strength. The in situ crack formation was detected by an acoustic emission system coupled to the set up. The hot zone temperature was measured by an infra red pyrometer. The equipment was also designed to run thermal fatigue test cycles in automatic mode between two selected temperatures. The temperature and thermal stress distribution in the test specimen were modelled using finite element software. The effect of temperature distribution of the top and bottom surfaces on thermal stresses was studied. It was observed that the thermal stress is very sensitive to the temperature distribution on the top surface and maximum near the periphery of the top surface. This was in agreement with the experimental results in which the cracks were originated from the periphery of top surface. It was also observed that the failure temperature was higher for thicker samples.     

有限元法应用于微波和光波器件的问题和发展

本文就有限元法应用于微波和光波器件的原理、问题和最新进展作了综合评述。文中讨论了适用于不同问题的变分公式的意义；着重讨论了避免和消除虚模的方法和处理开放边界的技术；还对代表该领域发展趋势的三个方面，即边棱元法。非线性结构及有限元程序的前后处理问题进行了评论和展望。     

A finite element parametric study on the mechanical properties of J-shaped steel hysteresis devices

The present paper discusses the mechanical properties of J-shaped steel hysteresis devices, abbreviated to “J-dampers”, interposed between the upper structure of a spatial structure and its substructure. The mechanical properties of a J-damper, which are characterized by its key geometrical and material parameters, are evaluated through parametric analyses using an in-house Finite Element program. The hysteresis behavior of a J-damper is also modeled by a bi-linear elasto-plastic hysteresis model with the strain-hardening effect. Its elastic stiffness, yield strength and dimensionless hardening ratio, which are expressed as functions of the parameters, are formulated on the basis of mathematical models and the results of parametric studies. Finally, some remarks relevant to the application of the proposed hysteresis model are made for the design of the J-damper.     

超声变幅杆解析法设计的可靠性研究

本文提出了用有限元法验证变幅杆解析法设计的可靠性，对三种类型的变幅杆先作解析法设计；然后利用有限元分析软件ANSYS进行模态分析，确定了变幅杆的固有频率，计算了固有频率与工作频率之间的相对误差，以此来评价解析法设计的可靠性；并分析了影响解析法设计可靠性的两个基本因素。     

准噶尔盆地加快天然气勘探有利条件及预探领域分析

准噶尔盆地天然气资源十分丰富,勘探潜力巨大。该盆地具备形成大气区的地质背景,发育石炭系、二叠系、侏罗系三套气源岩,演化程度高,气源条件充足;发育多类型、多套储集体和四套区域盖层,形成了有利的储盖组合及成藏配置。通过对五彩湾、滴西、莫索湾、莫北地区典型气藏的分析研究,该盆地发育多种气藏类型,包括构造型、古潜山型、火山岩内幕型及地层(不整合遮挡)型。通过研究指出,天然气勘探的现实领域有陆东—五彩湾地区、陆西—莫北—莫索湾地区;待突破的领域有腹部下组合大型古隆起及岩性气藏、南缘冲断带;正在准备的勘探领域主要为煤层气。