计算机硬盘坏磁道修复的思路与技巧

本文通过隐藏坏磁道分区的方法,着重介绍了硬盘坏磁道的修复技术及注意事项,同时还介绍了逻辑坏磁道、0磁道损坏的修复方法。     

PRO/Ⅱ软件在硫磺回收中的二次开发应用

硫磺回收装置的设备需要有较大的操作弹性。针对其过程气进口压力低，手工计算难于进行严格的全程压降计算，现以PRO／Ⅱ软件为开发平台，通过扩充数据库和建立模拟流程，成功地将其用于硫磺回收装置的设备选型和核算，为工程设计提供了先进的计算手段。     

Simultaneous recovery of copper and surfactant by an electrolytic process from synthetic solution prepared to simulate a concentrate waste stream of a micellar-enhanced ultrafiltration process

Electroplating method was employed to recover copper and surfactant simultaneously from synthetic solutions prepared to simulate concentrated waste stream generated from micellar-enhanced ultrafiltration. Effects of surfactant and copper (II) concentrations, surfactant to copper (II) molar ratio (S/M), electroplating voltage and time, solution pH, and ionic strength on metal recovery and electrical current efficiency were investigated. Results show that at a fixed S/M ratio of 5, the first-order kinetic constant for Cu (II) removal by electroplating increases with decreasing SDS concentration. At fixed SDS concentration of 8.5 mM, increasing initial Cu (II) concentration increases both Cu (II) recovery and current efficiency. Electrolyte pH has profound effects on the metal recovery and current efficiency due to the difference in solution conductivity after pH adjustment and the extent of Cu (II) adsorption onto SDS at different pHs.     

基于Jpcap的Webmail邮件还原技术

基于Smtp和Pop3的邮件还原技术已经日臻成熟,而由于主要Webmail邮件格式不同,Webmail邮件还原技术一直是难点。通过对主要Webmail的内容格式分析,针对不同网站的Webmail建立相应的还原模块,实现对主要Webmail的内容还原。实验结果验证了该技术的有效性。     

丙烯腈生产中噁唑控制方法的研究

本文介绍了丙烯腈生产过程中影响杂质噁唑产生的因素，并对噁唑超标的处理方法进行了研究，成功地将侧线产品中噁唑的含量控制在10^-6之内。     

压缩机废油回收工艺小结

介绍了压缩机废油回收的原理、工艺及操作要点,达到了节油降耗的目的。     

Chemical Composition Determination at the Bottom Region of a Recovery Boiler Furnace by Direct Minimization of Gibbs Free Energy

An optimization strategy has been applied to describe the chemical composition at the furnace bottom in the Kraft recovery boiler of a pulp production process. The concentrations of each involved chemical species were calculated through an optimization approach, minimizing the Gibbs free energy of the system. Various systems were proposed and tested, assuming different chemical species and phases number. Because serious initialization problems were found at this stage for some of the proposed systems, an optimization heuristic method (PSO) was used for the first approach to the problem. Once the appropriate phases number and chemical species in the system were determined, the initialization problems disappeared and the use of a deterministic optimization method (SQP) became viable. The proposed approach has shown to be satisfactory to reproduce industrial data and also data reported in the open scientific literature.     

Application of open-pit and underground mining technology for residual coal of end slopes

Given the conditions of residual coal from the boundary of a flat dipping open-pit mine,which uses strip areas mining and inner dumping with slope-covering,we propose an open-pit and underground integrated mining technology for residual coal of end slopes.In the proposal a conveyance road and ventilation conveyance near the slope are built,corresponding to the pit mining area and the surface coal mine dump,as well as an interval haulage tunnel and air-inlet tunnel.The outcome shows that such mining method may reduce the effect to slope stability from underground mining,it does not affect the dumping advance and has a high recovery rate of residual coal resources.The working face is timbered by single hydraulic props,transported by a scraper conveyor and supported by coal walls.This method of mining is one of layered top coal caving,with high resource recovery,low production cost where positive economic benefit can be realized.     

数控车床振动的控制Ⅰ:振源与力学模型

本文论述了数控车床的振源，建立了三种力学模型，并进行了分析，为数控机床的数学模型的建立和振动的控制打下了基础。     

浅谈计算机硬盘数据丢失原因及恢复

本文主要对计算机硬盘数据丢失的原因、恢复软件的应用方法进行分析。