Reactive dye removal in dye/salt mixtures by nanofiltration membranes containing vinylsulphone dyes: effects of feed concentration and cross flow velocity

In this study, DS5 DK type nanofiltration membranes were tested to recycle the reactive dye bath effluents. Reactive black 5 (RB5), reactive orange 16 (RO16), reactive blue 19 (RB19) and NaCl were used in the experiments to prepare the synthetic dye and salt mixtures. Effects of feed concentration, pressure and cross flow velocity on the permeate flux and color removal were investigated. Permeate flux increased with increasing pressure for all NaCl solutions. Dye concentration had a significant effect on flux values. Under the fixed NaCl concentrations the flux decreased with increasing dye concentrations. Dye rejections greater than 99% were achieved. Permeate was almost colorless. A gel layer formed by the rejected dye on membrane surface operates as a resistance to the permeation of dyes due to complete rejection of high molecule weight dyes, especially for the low salt concentrations. The presence of salt concentration has an interesting effect on color removal. Color removal decreased with increasing salt concentration. Cross flow velocities had also a significant effect on flux values. The dye formed agglomerates at high NaCl concentrations. High cross flow velocities decreased this effect.     

换热器管板厚度的快速计算

在化工生产中，换热器设备是应用最广泛的一种设备，且占主导地位。而在换热器设计过程中，管板厚度设计计算比较复杂。本文的特点是在满足GB151—1999《管壳式换热器》标准要求的前提下，介绍一种快速简便估算管板厚度的计算公式，从而达到快速确定管板厚度的目的。     

An Experimental Study of Fatigue Strength for Adhesively Bonded Tubular Single Lap Joints

In this paper, manufacturing technology of the tubular single lap adhesive joint was studied to obtain reliable and optimal joint quality. In addition, a surface preparation method and a bonding process for the joint were devised. The effect of the adhesive thickness and the adherend roughness on the fatigue strength of the joint was experimentally investigated. From experiments, it has been found that the fatigue strength of the joint increased as the adhesive thickness decreased and the optimal arithmetic surface roughness of the adherends was about 2 μm.     

螺旋侧板厚度对浮式风力机Spar平台涡激载荷的影响

Spar平台因其特殊的深吃水立柱式结构,在来流影响下极易发生涡激运动。为探究不同厚度螺旋侧板对浮式风力机Spar平台涡激载荷的影响,基于CFD方法,针对不同厚度螺旋侧板,对平台进行了数值模拟并详细分析平台的升阻力系数、压力场及涡量场等流场参数。结果表明:螺旋侧板可有效抑制涡激载荷,且随厚度增加,升力系数幅值先增加后减小,阻力系数逐步减小;在研究范围内,螺旋侧板厚度为0.10 D时,升力系数幅值最小,阻力系数与原型平台在同一范围内,对涡激载荷的抑制效果最好。     

降膜波动特性的研究

本文提出了一种测定膜厚的新方法－双电导探针法，测定了高湍流降膜的厚度沿降膜管管程的变化情况，探讨了径向平均膜厚及膜厚的概率密度分布沿管程的变化规律，证明降膜的波动特性同时受到液相雷诺数和管程的影响。并对平均膜厚和液相雷诺数作了经验关联，得出NT＝（δ^ )^2/3 [8.92(ReL/4)^5/2 6.0×10^-6(ReL/4)^9/2]^2/15。     

工业管道测厚技术在化工厂的应用

本文较为详细地介绍了工业管道的规范化管理及其在化工厂的应用。指出管道定期定点测厚和计算机管理是工业管道规范化管理的重要内容。通过实施这一管理措施可以提高企业的经济效益和社会效益。     

Viscoelastic and Processing Effects on the Fiber-Matrix Interphase Strength. Part I. The Effects of Loading Rate, Test Temperature, Fiber Sizing and Global Strain Level

The effects of loading rate, fiber sizing, test temperature and global strain level on the adhesion strength between carbon fibers and a thermosetting epoxy (Epon 815) are studied using the single fiber fragmentation test procedure. Analytical methodology describing the viscoelastic behavior observed is also presented. The possibility of rate-temperature-interphase thickness superposition for the interfacial strength function is illustrated based on the analytical models discussed. Experimental data are discussed using Weibull statistics and also presented in the form of percent relative frequency histograms for the fiber fragments in a collective fashion. The use of histograms allows for interpretation of the skewness in the data population.     

宽厚板厚度控制模型的优化

宽厚板厚度控制的目的是轧制出板形良好、板凸度小、同板差和异板差尽可能小的产品.莱钢宽厚板生产线自投人生产以来,在板凸度、厚度的均匀性、同板差和异板差等宽厚板厚度控制的瓶颈问题上都难以达到要求.为了实现对轧制厚度的要求,我们在现有的厚度控制模型的基础上,深入理解其控制功能、补偿功能的作用,找到引起厚度难以控制的主要因素,采取轧辊刚度补偿、轧辊偏心补偿、支撑辊油膜厚度补偿、工作辊热膨胀补偿及冲击力补偿等措施来优化厚度控制模型.自优化相应厚度参数和增加相关补偿控制功能以来,宽厚板厚度控制的精度得到很大的提高,具有很高的推广价值.     

胶层厚度对拉伸试样应力分布影响的数值分析

运用弹塑性有限元法研究了胶层厚度对承受拉伸载荷的对接接头胶层内应力分布的影响．三维有限元法数值分析的结果表明，随胶层厚度减小，胶层中正应力SZ与剪应力SYZ的分布趋于均匀；而对正应力SY而言，胶层厚度为0．15mm时，其边缘峰值应力最低。