关于非线性浅水波理论中的孤立波解

本文在[1]的基础上,详尽地得到了Boussinesq方程和KdV方程的孤立波解,并对波高和波形进行了细致的分析。为了更好地比较,本文还给出了高阶摄动的孤立波解。     

Ionomer composites based on sepiolite/hydrogenated poly(styrene butadiene) block copolymer systems

Ionomeric composites based on sepiolite and hydrogenated poly(styrene butadiene) block copolymer were obtained and characterized from a microstructural and electrical point of view. Before blending, because of the high silanol group concentration in the sepiolite, the latter could be organophilized with suitable coupling agents. The resulting materials were easily processed into thin films or membranes 0.2–0.4 mm thick, their conductivity in some cases approaching 10^?1 S/cm. Their suitability for film formation and good electrical properties indicate potential applications as electrolytes in polymer fuel cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3512–3519, 2002     

光学分数傅里叶逆变换的无透镜模式

用波前相因子判断法，将球面波照明物体的自由空间菲涅耳衍射光场分布与分数傅里叶逆变换的标准频谱分布进行位相比较，提供了广义条件下光学分数傅里叶逆变换的无透镜模式，给出其光学实现基本单元参量选择的判定法则，计算机模拟实验证明了结论的可靠与可行。     

二极管端泵浦连续激光器激活介质长度与透过率的优化

从准三能级系统的速率方程出发,推导出了二极管(LD)端泵浦连续工作端面泵浦固体激光器的速率方程,提出了计算连续LD端面泵浦激光器输出功率的方法,并表示成激活介质长度和透过率的函数,由此得到在泵浦功率一定情况时的优化设计步骤。数值计算结果与我们的实验结果和文献[3],[4]的实验数据符合甚好。     

一维波动方程反演波阻抗的实现及效果

利用波动方程反演波阻抗，由于计算工作量大、稳定性差等原因，一直没有在地震勘探资料处理中得到实际应用。本文提出的一维波方程逐段折叠反演方法能较好地克服上述缺陷，具有计算量相对较小、精度高、稳定性好等特点。并在大庆长垣东部和西部的实际资料处理中见到了良好的效果。     

机械研磨 Ni_(50)B_(50)合金形成非晶的过程

本文研究了机械研磨 Ni_(50)B_(50)合金非晶的形成过程。唯象地提出用 J-M-A 方程描述此过程,并作了简单的讨论。     

OPERATOR-SPLITTING METHOD FOR ANALYSIS OF CAVITATION IN LIQUID-LUBRICATED HERRINGBONE GROOVED JOURNAL BEARING

ＮＯＭＥＮＣＬＡＴＵＲＥｃ　ｒａｄｉａｌｃｌｅａｒａｎｃｅｈ　ｆｉｌｍｔｈｉｃｋｎｅｓｓ ｈ　ｄｉｍｅｎｓｉｏｎｌｅｓｓｆｉｌｍｔｈｉｃｋｎｅｓｓ (ｈ/ｃ)Ｌ/Ｄ　ｒａｔｉｏｏｆｌｅｎｇｔｈｔｏｄｉａｍｅｔｅｒｐ　ｆｉｌｍ ｐｒｅｓｓｕｒｅｅ　ｅｃｃｅｎｔｒｉ     

GENERATION OF NONLINEAR INTERNAL WAVES ON CONTINENTAL SHELF

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＩｎｔｅｒｎａｌｔｉｄａｌｉｎｔｅｒａｃｔｉｏｎｗｉｔｈｂｏｔｔｏｍｆｅａｔｕｒｅｓａｐｐｅａｒｓｔｏｂｅｔｈｅｄｏｍｉｎａｎｔｍｅｃｈａｎｉｓｍｆｏｒｇｅｎｅｒａ ｔｉｏｎｏｆｔｈｅｃｏｈｅｒｅｎｔｏｃｅａｎｉｃｉｎｔｅｒｎａｌｗａｖｅｓｔｈａｔａｒｅｏｂｓｅｒｖａｂｌｅｗｉｔｈＳＡＲ ,ｃｌｏｓｅｒｔｏｓｈｏｒｅ ,ｒｉｖｅｒｉｎｅｏｒｇｌａｃｉａｌｉｎｔｒｕｓｉｏｎａｎｄｃｏｎｔｉｎｅｎｔａｌｂｒｅａｋｐｒｏｖｉｄｅｓｅｃ ｏｎｄａｒｙｇｅｎｅｒａｔｉｎｇｍｅｃｈａ…     

群时延精确设计的全差分四阶Bessel滤波器

采用MOS管有源电阻,提出了一种全差分R-MOSFET-C四阶Bessel有源低通滤波器,.通过调节工作于亚阈值区的CMOS管的沟道导纳补偿电阻值的大小,能抵消集成电路制造工艺中电阻值的一致偏差,实现Bessel有源滤波器群时延的精确设计.根据无源滤波器的状态方程完成有源滤波器的综合,应用3.3V,0.5μm CMOS工艺完成了群时延大小为0.75μs的四阶Bessel低通滤波器的管极计算机仿真,仿真结果表明所提电路正确有效,适于全集成.     

Adhesive Contact of a Membrane with a Hemispherical Indenter: Theoretical Analysis and Model Liquid System

The axisymmetric Laplace equation is solved numerically to extract contact-angle data for a flat liquid/vapor interface contacting a submerged hemispherical solid. The liquid/vapor interface is treated as a membrane, with a membrane tension equal to the surface energy of the liquid. By measuring the vertical displacement of the membrane and the projected contact area the membrane makes with the hemisphere, the contact angle and correspondingly the driving force for motion of the contact line can be measured. We show that characteristic receding and advancing contact angles can be obtained by measuring the contact radii formed upon initial contact between the interface and hemisphere and final contact just prior to detachment of the interface, respectively. Use of the technique is illustrated with a model experiment involving the contact of an air/water interface with a poly(methyl methacrylate) surface.