New synthesis technique of supported ZSM-5 using organo-alumino-silicic gels

This contribution deals with the synthesis of a silicon-rich ZSM-5 obtained from an amorphous organo-alumino-silicic gel. The gel was formed by reacting a mechanical mixture of RHA (rice hull ash), silica’s source, and of natural clinoptilolite, source of alumina, with glycerol during 2 h at 200 °C. After a maturation period of one day at 60 °C, the reaction product was hydrolyzed by a tetra-propyl-ammonium (TPA) solution and then aged for two days at 135 °C in a stainless steel autoclave. After washing and drying, the X-ray pattern showed a well crystallized ZSM-5. The textural analysis of the slowly calcined solid at 500 °C for 4 h, and the SEM micrographies evidence that the zeolite was supported on mesoporous silica. The proportion of both components depends on the tunable hydrolysis conditions.     

Electronically tunable high-input impedance voltage-mode universal biquadratic filter based on simple CMOS OTAs

This paper describes a new electronically tunable three inputs and single output voltage-mode universal biquadratic filter based on simple CMOS operational transconductance amplifiers (OTAs) and grounded capacitors. The proposed configuration provides lowpass, highpass, bandpass, bandstop and allpass voltage responses at a high impedance input terminal, which enable easy cascadability. Additionally, the circuit parameters ω_o${\omega }_o$ and Q   can be set orthogonally by adjusting the transconductances and grounded capacitors. The filter also offers an independent electronic control of parameters ω_o${\omega }_o$ by adjusting the transconductance through the bias current/voltage of the OTA. For realizing all the filter responses, no critical component matching condition is required, and all the incremental parameter sensitivities are low. PSPICE simulation results are performed to confirm the theoretical analysis.     

Tunable full-color emission phosphors: Enhanced security application via a patterned 3-dimensions code

Developing tunable full-color emission photoluminescent materials is always desired in color-on-demand applications and still confronts challenges. Theoretically, full color including white emission can be achieved by the combination of three primary colors (red, green, and blue) based on the additive color theory. Herein, a strategy for the preparation of tunable full-color luminescence is realized by mixing the inorganic rare-earth-doped SrAl₂O₄: Eu²⁺, Dy³⁺ (green emission), Y₂O₂S: Eu³⁺, Mg²⁺, Ti⁴⁺, Ti⁴⁺_0.05 (red emission), and Sr₂MgSi₂O₇: Eu²⁺, Dy³⁺ (blue emission) phosphors with different ratios. By adjusting individual phosphors at certain specific ratios, white light (0.332, 0.332) and full-spectra emission are achieved under a single low excitation energy (λ_ex = 365 nm) using a portable ultraviolet (UV) lamp. Based on the facile preparation and effective tunable full-color emission features of the phosphors, a novel encryption way of the luminescent unit as information storage 3 dimensions (3D) codes is developed. The multiplexed encrypting information capacity of the codes is enhanced in a 3D maneuver strategy by simply adjusting the number of light-emitting units with infinite emission colors. The proposed strategy makes the tunable full-color emission phosphors useful in promising applications including full-color display, high-level information encryption and anti-fake.     

A process-tolerant out-of-band blocker rejection technique for SAW-less receivers

In this paper, an active filtering technique is presented which is capable of filtering the out-of-band blockers in wireless receivers. The concept is based on the feedforward cancellation technique where a blocker replica is subtracted at the output of the low-noise amplifier (LNA). In contrast to the previously reported feedforward cancellation methods, exact gain and phase matching are easily obtained in the proposed architecture to produce a highly selective narrowband frequency response at the output of the LNA with wide rejection bandwidth. For the proof of concept, the system is implemented in a 65 nm CMOS technology. It occupies a total area of 0.8 mm² and the current consumption is 24 mA from a 1.2 V supply. The system post-layout simulations showed a blocker rejection of more than 33 dB for blocker signals 100 MHz away from the desired signal when the feedforward path is activated. The noise figure (NF) of the entire system is 3.8 dB that degrades to 5.8 dB when the feedforward path is activated.     

Compact VDTA-based current-mode electronically tunable universal filters using grounded capacitors

This paper presents a compact current-mode three-input single-output (TISO) type universal filter. Only one voltage differencing transconductance amplifier (VDTA) and two grounded capacitors are employed in the proposed filter. The circuit can realize lowpass, bandpass, highpass, bandstop and allpass biquadratic filter outputs by connecting the appropriate inputs, and offers electronic control of the natural angular frequency (ω₀) and quality factor (Q) by means of adjusting the transconductance gain of the VDTA. In addition, by slight modification of the proposed scheme, another more useful TISO construction with orthogonal ω₀–Q tuning has been obtained. Both the discussed universal filters have been shown to have low incremental active and passive sensitivities. To demonstrate the performances of the filters and verify the theoretical analysis, computer simulations are accomplished with the PSPICE program.     

可调谐光纤F-P线性滤波器的设计与分析

光纤滤波器在光纤通信和光纤传感领域发挥着重要的作用。本文基于光学薄膜干涉理论设计了一种用于光纤传感的可调谐F-P线性滤波器,该滤波器由两端面相对的入射光纤与出射光纤构成,两光纤端端面分别镀有反射光纤薄膜。该F-P干涉腔改善了传统F-P腔的透射率响应特性,有助于提高滤波器的线性度和线性范围。本文采用光学薄膜干涉矩阵分析法对该滤波器的透射率响应关系进行了计算与分析,并得出该FP滤波器的结构参数。设计结果表明,这种新型线性滤波器具有线性度好、线性范围宽和线性区间可调的优点。     

激光分析仪在型煤炉制气半水煤气氧含量分析中的应用

可调谐半导体激光吸收光谱(TDLAS)技术的西门子的SITRANS SL激光气体分析仪在型煤制气中的应用。根据实际情况,对其光路结构进行改造,以满足现场需求。     

空气反馈信号控制柴油机排气再循环系统研究

建立了一种排气再循环变EGR率控制系统。以新鲜空气质量流量信号代替EGR率或再循环排气量信号作为反馈信号，该系统模型，通过调节EGR阀门，改变再循环排气量，相应改变进入气缸内的新鲜空气量，使之基本达到相应工况控制要求值。在四种转速负荷条件下，对有、无这种EGR系统的SD1110柴油机排气中NOx浓度和燃油消耗率进行了对比，试验证明该系统可以有效降低柴油机NOx排放并保证一定燃油消耗率，同时还有效解决了反映再循环排气量信号的采集问题。     

点燃式内燃机气体燃料电控喷射技术的研究

气体燃料被认为是很有前途的车用低污染代用燃料。本文对气体燃料进气门电控喷射技术进行了研究，研制了气体燃料喷射系统、电子点火系统和发动机控制系统，对空燃比、压缩比和充气系数等参数对发动机性能的影响进行了试验与分析。     

"前景/背景"设计方法在摩托车实时控制中的应用

摩托车电控系统是一个实时控制系统,各控制任务的执行对时间的要求很高。本文介绍的“前景／背景”的软件设计方法,将实时性要求高的软件功能作为“前景”,迅速得到主芯片的响应;“背景”则包括实时性要求相对较低的软件功能及“前景”程序执行所需要的各种参数的计算。通过“前景／背景”的设计可以使系统达到很高的性能指标,从而推动电按摩托车技术得到更广泛应用。