SOC设计中的浮动压焊块电源/地线网络设计和优化

随着VLSI工艺技术的发展和芯片规模的不断增加，尤其是在SOC设计中，原有的那种供电压焊块只能位于芯片边缘的确定益的模式已经不能够满足整个电路性能的需要。在很多情况下，依靠在电源线的拓扑结构确定后的线宽优化，还是无法保证在有限的布线资源下为电路提供可靠的高性能的供电需求。由此，出现了在芯片边缘上浮动放置压焊块及在芯片的顶部放置供电压焊块阵列的方法。文中提出了一种用于SOC设计中新的基于树型结构的浮动压焊块的电源／地线网络优化算法，经过MCNC电路实例测试后得到明显的优化结果。     

岔河集油田开发调整的主要做法与成效

岔河集油田有多个受构造、岩性双重因素控制的中低渗透复杂断块油藏,其主要储集层为河流相沉积。油田20余年的开发历程是典型的滚动勘探开发过程。通过精细科学的地质研究,不断的实践和认识,制定出与其油田地质特点相适应的开发方针,完善了井网部署与加密、产吸剖面调整、油水井配套综合治理等一系列开发对策,并取得了比较好的开发效果。岔河集油田的开发实践对于类似油田开发不乏成功的经验。     

Highly ordered microstructures of poly(styrene-b-isoprene) block copolymers induced by solution meniscus

Microstructures of hundreds of micron thick poly(styrene-block-isoprene) copolymer films solution-cast in a cylindrical tube with the solvent evaporation controlled were investigated by transmission electron microscope (TEM), small angle X-ray scattering (SAXS) and optical microscope (OM). In a block copolymer with cylindrical polyisoprene microdomains, the orientation of the cylinders was varied along radial direction of the cylindrical tube. Highly aligned hexagonal arrays of in-plane polyisoprene cylinders were formed with their cylindrical axis parallel to the circumference of the tube in the regimes close to the wall edge. In contrast randomly ordered microdomains were observed at the center of the tube. We have also found that the orientation depends on the solvent evaporation rate and an intermediate rate (∼2.3 nL/s) provides the best orientation. In the case of a block copolymer with a bicontinuous double gyroid structure, we obtained a globally ordered microstructure where [111] crystallographic direction was parallel to the circumference of the tube. For both block copolymers, the area of highly ordered arrays of nanoscopic domains is over 1 mm². Development of the orientation was explained by coupling two orthogonal fields: (1) The flow of a solution induced by strong capillary force at a meniscus between the cylindrical tube wall and the block copolymer solution and (2) the solvent evaporation.     

建筑工程投标报价优选模型

通过建立区间二次规划数学模型、灰色模型、多目标规划等模型，建立材料价格和用量的选择模型，提供投标单位一种便捷的调整工程造价和控制造价的手段。     

安棚深层系凝析气井射孔压井液技术研究

介绍了一种保护油气层的射孔压井液技术，该技术所用的配方具有低密度，低表面张力且具有较强的防膨能力等特点，在安棚深层系低孔低渗油田安3003等凝析气井作业中现场试验，解决了安棚深层系低压气井的水锁伤害等问题，对低孔低渗油气田作业入井流体的研究与应用具有较好的借鉴意义。     

时滞系统控制问题块脉冲算子解的收敛性

本文给出了一种基于块脉冲算子的离散逼近格式.应用这种逼近格式,可以获得时滞非 线性最优控制问题的块脉冲级数解.本文证明了这种块脉冲级数解将收敛于这类问题的精 确解,并具有一阶收敛速度.     

The Continuous Interpolating Self-organizing Map

The self-organizing map (SOM) [5] provides a general data approximation method which is suitable for several application domains. The topology preservation is an important feature in data-analysis and may also be advantageous for the evaluation of the data in a function approximation or regression task. For this reason the interpolated self-organizing map (I-SOM) adds an output layer to the SOM architecture which computes a real valued output vector. This paper presents an extension of I-SOM towards a continuous interpolation. It is compared to RBF and to the parametrized self-organizing map.     

火烧油层技术在庙5块低渗透稠油油藏中的应用

方法在物理模拟的基础上，利用数值模拟及油藏工程方法，对影响火烧油层的技术参数进行了优选研究，并对影响火驱成败的油藏地质参数、注气参数进行了分析。目的寻找适合庙５块低渗透稠油油藏的开采方法。结果提出了庙５块火驱的最佳开采方式、点火参数及注气参数；庙５块火驱生产后，平均单井日产液由０１ｔ上升到５６ｔ，平均单井日产油由０１ｔ上升到３５ｔ，生产２６ｄ后由于压风机供风不足被迫停止火驱注气；从数模结果看：火驱最终采收率可达３９８％。结论火烧油层是一种潜力很大的稠油开采方法，但其物理、化学反应机理复杂，火烧前缘难以控制；庙５块火驱初期虽然见到了一定的生产效果，但没有取得经济效益     

NUMERICAL MODEL FOR DYNAMIC SIMULATION OF TRAFFIC FLOW

ＮＵＭＥＲＩＣＡＬＭＯＤＥＬＦＯＲＤＹＮＡＭＩＣＳＩＭＵＬＡＴＩＯＮＯＦＴＲＡＦＦＩＣＦＬＯＷＷｕＺｈｅｎｇ；ＺｅｎｇＬｉ－ｎｏｎｇ（ＤｅｐａｒｔｍｅｎｔＡｐｐｌｉｅｄＭｅｃｈａｎｉｃｓ，ＦｕｄａｎＵｎｉｖｅｒｓｉｔｙ，Ｓｈａｇｈａｉ２００４３３，Ｐ...     

用层次分析法(AHP)确定QFD中客户需求权重

客户需求权重的确定是质量功能配置(QFD)实现过程中的重要一环，然而传统的确定权重的方法都有各自的缺陷。本文采用层次分析法(AHP)来确定客户需求的权重，首先建立了评价模型，并构造出比较判断矩阵，然后通过层次排序和一致性检验，最终获得了接近实际的客户需求权重结果。文章最后以某企业所生产的车床的客户需求为例，验证了用AHP法来确定QFD中客户需求权重的可行性。