基于NIOSⅡ的数字电子钟设计与实现

以NioslCycloneEPIC20F400C7开发板为硬件平台,利用OuartusⅡ、SOPCBuilder和NiosⅡIDE软件设计来实现一个基于SOPC的多功能数字电子钟,该电子钟系统由FPGA部分（包括Nios11CPU核、内部定时器、Avalon总线等）、存储器部分（包括SRAM、FLASH）和外围元件部分（按键、LCD显示器）三大部分构成,经过C语言编程使该电子钟具有能够在液晶屏上显示帮助信息,具有时问、日期、状态提示的功能,并可利用4个按键对时间（小时和分钟）、日期（年月日）进行设置（包括退出设置）。经测试该电子钟具有较好的时间精度。     

Preparation of highly crystalline nanofibers on Fe and Fe-Ni catalysts with a variety of graphene plane alignments

The present study confirmed that highly crystalline nanofibers with controlled structure may be prepared over Fe and Fe-Ni alloy catalysts. The degree of graphitization of various carbon nanofibers (CNFs) was analyzed by using C(0 0 2) peaks from the XRD profiles. The C(0 0 2) peaks of CNFs over Fe catalyst shifted to higher angle and became narrower as the preparation temperature increased from 560 to 620 °C. Tubular CNFs prepared at temperature higher than 630 °C showed lower 2θ angles compared to those of platelet fibers. CNFs prepared over Fe-Ni catalysts tended to resemble those prepared over Fe catalysts. The degree of graphitization of platelet CNFs resembled natural graphite, while d_0 0 2 of the tubular CNFs showed values below the 3.39 Å reported as a theoretical minimum for a cylindrical alignment. Lc_0 0 2 of platelet and tubular CNFs increased by heat treatment at 2000 and 2800 °C though d_0 0 2 changed little. A transverse section of platelet and tubular CNFs had a hexagonal shape, not a round shape. The hexagonal column allows AB stacking of hexagonal planes that can give perfect hexagonal alignment.     

复杂系统平均寿命的估计和性质

根据已知的基于最小路径或最小割集复杂系统可靠度函数的解析表达式,给出当子系统寿命分布服从指数分布时,系统平均寿命的表达式.利用这一表达形式,在子系统寿命变量服从指数分布条件下,分别就完全数据和截尾数据两种情况,给出了系统平均寿命的估计,并对估计性质进行了研究.并在完全数据下,给出了估计的渐近分布.     

中国信息服务业空间集聚研究

通过产业集聚的EG指数对中国各省份信息服务业的空间集聚程度进行研究,得出集聚程度比较显著.在此基础上,找到这一服务业的两个相关指标,利用产业集中度CRn判断出信息服务业主要集中于北京、广东等六个地区,然后对两指标数据进行无量纲化处理,加权求和得到新的综合指标,最后对这一新指标进行了系统聚类分析,得知这一产业主要集中在北京和广东两个地区.     

The influence of sulphate-reducing bacteria biofilm on the corrosion of stainless steel AISI 316

This work investigates microbially-influenced corrosion (MIC) of stainless steel AISI 316 by two sulphate-reducing bacteria, Desulfovibrio desulfuricans and a local marine isolate. The biofilm and pit morphology that developed with time were analyzed using atomic force microscopy (AFM). Electrochemical impedance spectroscopy (EIS) results were interpreted with an equivalent circuit to model the physicoelectric characteristics of the electrode/biofilm/solution interface. D. desulfuricans formed one biofilm layer on the metal surface, while the marine isolate formed two layers: a biofilm layer and a ferrous sulfide deposit layer. AFM images corroborated results from the EIS modeling which showed biofilm attachment and subsequent detachment over time.     

Effects of coating thickness and residual stresses on the bond strength of ASTM C633-79 thermal spray coating test specimens

Wire-arc-sprayed nickel-aluminum is widely used in the aircraft industry for dimensional restoration of worn parts and as a bond coat for thermal barrier coatings and other top coats. Some repair applications require thick coatings, which often result in lower bond strength. A mechanism being investigated to ex-plain this decrease in bond strength is the free edge effect, which includes both coating residual stresses and coating thickness. The layer-removal method was used to determine experimentally the residual stresses in wire-arc-sprayed nickel-aluminum coatings of different thicknesses. Bond strength evalu-ations were performed using an improved ASTM C 633-79 test specimen. Finite-element analysis and fracture mechanics were used to investigate the effects of coating thickness and residual stress state on coating bond strength.     

Influence of chromium on the local structure and morphology of ferric oxyhydroxides

The extended X-ray absorption fine structure (EXAFS) method and transmission electron microscopy (TEM) have been used for characterizing the local structure and morphology of ferric oxyhydroxides, α-FeOOH and γ-FeOOH, with and without chromium. These ferric oxyhydroxide powders were prepared from aqueous solutions containing iron and chromium ions. Radial structural functions for iron obtained by Fe K edge EXAFS spectra showed that the linkage of structural units formed by FeO₆ octahedra in γ-FeOOH is distorted by chromium addition, while such distortion in α-FeOOH is not clearly detected. On the other hand, Cr K edge EXAFS spectra showed that the local structure around chromium does not necessarily correspond to the local structure around of iron, which is observed by Fe K edge EXAFS spectra. This suggests that the structural units containing iron and chromium are heterogeneously distributed in these ferric oxyhydroxides. The local structural information was discussed coupled with morphological features of these ferric oxyhydroxides observed by TEM.     

Fuzzy adaptive networks in machining process modeling: surface roughness prediction for turning operations

Due to the complexity of the machine tool structure and the cutting process, the dynamics of machining processes are still not completely understood. This is especially true due to the demand of high-speed machining to increase productivity. In order to model and control these complex processes, new approaches, which can represent complex phenomenon combined with learning ability, are needed. The combined neural–fuzzy approach appears to be ideally suited for this purpose. In this paper, the recently developed fuzzy adaptive network (FAN) is used to model surface roughness in turning operations. The FAN network has both the learning ability of neural network and linguistic representation of complex, not well-understood, vague phenomenon. Furthermore, it can continuously improve the initially obtained rough model based on the daily operating data. To illustrate this approach, a model representing the influences of machining parameters on surface roughness is established and then the model is verified by the use of the results of pilot experiments. Finally, a comparison with the results based on statistical regression is provided.     

基于I2C总线技术的等离子喷焊系统的研究

阐述了基于I^2C总线技术的等离子喷焊过程控制系统的设计原理，介绍了软硬件及接口设计技术。实践表明，采用I^2C总线技术，不仅使系统的芯片大大减少，系统的灵活性增强，而且提高了系统的抗干扰能力。