Benchmark value determination of energy efficiency indexes for coal-fired power units based on data mining methods

The operational optimisation of coal-fired power units is important for saving energy and reducing losses in the electric power industry. One of the key issues is how to determine the benchmark values of the energy efficiency indexes of the units. Therefore, a new framework for determining these benchmark values is proposed, based on data mining methods. First, the energy efficiency key performance indicators (KPIs) associated with the net coal consumption rate (NCCR) were selected based on the domain knowledge. Second, the decision-making samples with minimal NCCR were acquired with the fuzzy C-means (FCM) clustering algorithm, and the corresponding clustering centres were employed as the benchmark values. Finally, based on the support vector regression (SVR) algorithm, the target values of the NCCR were obtained with the KPIs as input, and the energy saving potential was evaluated by comparing the target values with the historical values of the NCCR. An actual on-duty 1000 MW unit was taken as study unit, and the results show that the energy saving potential is remarkable when the operators adjust the KPIs based on the calculated benchmark values.     

Protection of power transformer using multi criteria decision-making

Power transformers are protected by different relays that operate independently. Malfunction of each relay has a major role in reducing the reliability of the protection system. In order to mitigate the main drawbacks of the power transformer relays, an overall protection scheme is presented in this paper. This scheme proposes a novel multi criterion algorithm using decision-making based on fuzzy logic. In this paper the outputs of restricted earth fault relay and a directional check unit, are combined with the output of the differential protection relay. Therefore, problems that are pertaining to independent operation of each relay have been mitigated and the relays cover protection blind spots of each other. The improved power transformer protection (IPTP) scheme enhances the sensitivity and reliability of the power transformer protection. Extensive simulations are used to measure the effectiveness and merit of the proposed IPTP relay. The above efforts result in a multi criteria approach for protection of power transformers.     

Theoretical study of the structural,elastic and thermodynamic properties of chalcopyrite ZnGeP2

The structural, elastic, and thermodynamic properties of ZnGeP₂ with chalcopyrite structure are investigated using the pseudo-potentials plane wave method based on the density functional theory with the generalized gradient approximation. The lattice parameters (a, c and u) are directly calculated and agree well with previous experimental and theoretical results. The obtained negative formation enthalpy shows that ZnGeP₂ crystal has strong structural stability. We have also calculated the bulk modulus B and the elastic parameters (C₁₁, C₁₂, C₁₃, C₃₃, C₄₄, and C₆₆) which have not been measured yet. The accuracy and reliability of the calculated elastic constants of ZnGeP₂ crystal are discussed. In addition, the pressure and temperature dependencies of the lattice parameters, bulk modulus, Debye temperature, Grüneisen parameter, entropy, volume thermal expansion coefficient, and specific heat capacity are obtained in the ranges of 0–20 GPa and 0–1200 K using the quasi-harmonic Debye model. To our knowledge this is the first quantitative theoretical prediction of the thermodynamic properties for ZnGeP₂ compound and still awaits experimental confirmations.     

ECG heart beat classification method based on modified ABC algorithm

Electrocardiogram is the most commonly used tool for the diagnosis of cardiologic diseases. In order to help cardiologists to diagnose the arrhythmias automatically, new methods for automated, computer aided ECG analysis are being developed. In this paper, a Modified Artificial Bee Colony (MABC) algorithm for ECG heart beat classification is introduced. It is applied to ECG data set which is obtained from MITBIH database and the result of MABC is compared with seventeen other classifier's accuracy.In classification problem, some features have higher distinctiveness than others. In this study, in order to find higher distinctive features, a detailed analysis has been done on time domain features. By using the right features in MABC algorithm, high classification success rate (99.30%) is obtained. Other methods generally have high classification accuracy on examined data set, but they have relatively low or even poor sensitivities for some beat types. Different data sets, unbalanced sample numbers in different classes have effect on classification result. When a balanced data set is used, MABC provided the best result as 97.96% among all classifiers.Not only part of the records from examined MITBIH database, but also all data from selected records are used to be able to use developed algorithm on a real time system in the future by using additional software modules and making adaptation on a specific hardware.     

Smart control of the assembly process with a fuzzy control system in the context of Industry 4.0

Assembly line balancing is important for the efficiency of the assembly process, however, a wide range of disruptions can break the current workload balance. Some researchers explored the task assignment plan for the assembly line balancing problem with the assumption that the assembly process is smooth with no disruption. Other researchers considered the impacts of disruptions, but they only explored the task re-assignment solutions for the assembly line re-balancing problem with the assumption that the re-balancing decision has been made already. There is limited literature exploring on-line adjustment solutions (layout adjustment and production rate adjustment) for an assembly line in a dynamic environment. This is because real-time monitoring of an assembly process was impossible in the past, and it is difficult to incorporate uncertainty factors into the balancing process because of the randomness and non-linearity of these factors. However, Industry 4.0 breaks the information barriers between different parts of an assembly line, since smart, connected products, which are enabled by advanced information and communication technology, can intelligently interact and communicate with each other and collect, process and produce information. Smart control of an assembly line becomes possible with the large amounts of real-time production data in the era of Industry 4.0, but there is little literature considering this new context. In this study, a fuzzy control system is developed to analyze the real-time information of an assembly line, with two types of fuzzy controllers in the fuzzy system. Type 1 fuzzy controller is used to determine whether the assembly line should be re-balanced to satisfy the demand, and type 2 fuzzy controller is used to adjust the production rate of each workstation in time to eliminate blockage and starvation, and increase the utilization of machines. Compared with three assembly lines without the proposed fuzzy control system, the assembly line with the fuzzy control system performs better, in terms of blockage ratio, starvation ratio and buffer level. Additionally, with the improvement of information transparency, the performance of an assembly line will be better. The research findings shed light on the smart control of the assembly process, and provide insights into the impacts of Industry 4.0 on assembly line balancing.     

Research on Circular Area Search algorithm of multi-robot service based on SOA cloud platform

Considering autonomous mobile robots with a variety of specific functions as a kind of service, when there are many types and quantities of services and the density of regional services is large, proposing an algorithm of Circular Area Search (CAS) because of the problem of multi-robot service scheduling in various areas. Firstly, Django is used as the web framework to build the Service-Oriented Architecture (SOA) multi-robot service cloud platform, which is the basic platform for multi-service combination. Then, the service type, the latitude and longitude and the scoring parameters of the service are selected as the service search metrics to design the CAS algorithm that based on the existing service information registered in MySQL and the Gaode Map for screening optimal service, and then providing the service applicant with the best service. Finally, the service applicant applies for the self-driving tour service as an example to perform performance simulation test on the proposed CAS algorithm. The results show that the CAS algorithm of the multi-robot service cloud platform proposed in this paper is practical compared to the global search. And compared with the Greedy Algorithm experiment, the service search time is reduced about 58% compared with the Greedy Algorithm, which verifies the efficiency of CAS algorithm.     

Chest X-ray enhancement to interpret pneumonia malformation based on fuzzy soft set and Dempster–Shafer theory of evidence

Image enhancement algorithms are commonly used to increase the contrast and visual quality of low-dose x-ray images. This paper proposes an automated enhancement method using soft fuzzy sets with a new decision-making scheme based on Dempster-Shafer theory of evidence for the visual interpretation of pneumonia malformation in low-dose x-ray images, called as XEFSDS. The XEFSDS model first generates an original source x-ray image into a complementary image, then each original and complement image is applied to the characterized image object and background areas of fuzzy space. The S-function is utilized to define fuzzy soft sets for the classification of gray level ambiguity in both images, and hence a decision criterion via Dempster-Shafer approach and fuzzy interval has been adapted to discriminate uncertainties on the pixel intensity and the spatial information. Modified membership grade operations have been performed on each object/background area, and Werner’s AND/OR operator (an aggregation operator) has been utilized to build a new membership function from two modified membership functions. Finally, an enhanced image is obtained from the new membership function via defuzzification. Experiments on different pneumonia X-ray images demonstrate that the XEFSDS scheme produces better results than the existing methods. To show the advantages of the XEFSDS scheme, we have executed a segmentation based examination on enhanced image for the detection of pneumonia malformation as well as abnormal lobe (lobar pneumonia) or bronchopneumonia.     

Learning fuzzy controllers in mobile robotics with embedded preprocessing

The automatic design of controllers for mobile robots usually requires two stages. In the first stage, sensorial data are preprocessed or transformed into high level and meaningful values of variables which are usually defined from expert knowledge. In the second stage, a machine learning technique is applied to obtain a controller that maps these high level variables to the control commands that are actually sent to the robot. This paper describes an algorithm that is able to embed the preprocessing stage into the learning stage in order to get controllers directly starting from sensorial raw data with no expert knowledge involved. Due to the high dimensionality of the sensorial data, this approach uses Quantified Fuzzy Rules (QFRs), that are able to transform low-level input variables into high-level input variables, reducing the dimensionality through summarization. The proposed learning algorithm, called Iterative Quantified Fuzzy Rule Learning (IQFRL), is based on genetic programming. IQFRL is able to learn rules with different structures, and can manage linguistic variables with multiple granularities. The algorithm has been tested with the implementation of the wall-following behavior both in several realistic simulated environments with different complexity and on a Pioneer 3-AT robot in two real environments. Results have been compared with several well-known learning algorithms combined with different data preprocessing techniques, showing that IQFRL exhibits a better and statistically significant performance. Moreover, three real world applications for which IQFRL plays a central role are also presented: path and object tracking with static and moving obstacles avoidance.     

Model Selection for Unsupervised Learning of Visual Context

This study addresses the problem of choosing the most suitable probabilistic model selection criterion for unsupervised learning of visual context of a dynamic scene using mixture models. A rectified Bayesian Information Criterion (BICr) and a Completed Likelihood Akaike’s Information Criterion (CL-AIC) are formulated to estimate the optimal model order (complexity) for a given visual scene. Both criteria are designed to overcome poor model selection by existing popular criteria when the data sample size varies from small to large and the true mixture distribution kernel functions differ from the assumed ones. Extensive experiments on learning visual context for dynamic scene modelling are carried out to demonstrate the effectiveness of BICr and CL-AIC, compared to that of existing popular model selection criteria including BIC, AIC and Integrated Completed Likelihood (ICL). Our study suggests that for learning visual context using a mixture model, BICr is the most appropriate criterion given sparse data, while CL-AIC should be chosen given moderate or large data sample sizes.