Evaluation of a proper controller performance for maximum-power point tracking of a stand-alone PV system

In this paper the implementation of a suggested stand-alone PV system, for maximum-power point tracking (MPPT), is carried out. Also, this paper presents a comparative study, through experimental work, between the conventional PI controller and the fuzzy logic controller (FLC) under different atmospheric conditions. The implemented system with both the PI controller and the FLC gives a good maximum-power operation of the PV array, but the tracking capability for different optimum operating points is better and faster for the case of using the FLC compared to the case of using the PI controller.     

A novel fuzzy clustering algorithm for the analysis of axillary lymph node tissue sections

Recently Fourier Transform Infrared (FTIR) spectroscopic imaging has been used as a tool to detect the changes in cellular composition that may reflect the onset of a disease. This approach has been investigated as a mean of monitoring the change of the biochemical composition of cells and providing a diagnostic tool for various human cancers and other diseases. The discrimination between different types of tissue based upon spectroscopic data is often achieved using various multivariate clustering techniques. However, the number of clusters is a common unknown feature for the clustering methods, such as hierarchical cluster analysis, k-means and fuzzy c-means. In this study, we apply a FCM based clustering algorithm to obtain the best number of clusters as given by the minimum validity index value. This often results in an excessive number of clusters being created due to the complexity of this biochemical system. A novel method to automatically merge clusters was developed to try to address this problem. Three lymph node tissue sections were examined to evaluate our new method. These results showed that this approach can merge the clusters which have similar biochemistry. Consequently, the overall algorithm automatically identifies clusters that accurately match the main tissue types that are independently determined by the clinician.     

数字移动电视的现状与发展前景

随着数字电视的普及推广,数字移动电视应运而生,并得到迅速发展。数字移动电视通常安装在交通工具上,兼具移动性和数字化的特点。它突破了传统电视固定收视的局限,带来了电视传播的新概念。同时,数字移动电视根据自身传播特性,不断探索新的运营模式,并带来一系列的产业链效应,蕴含着无限商机     

An analysis of the electrical conductivity in BaSO4-added Ag2SO4 solid electrolyte system

The compositions (1 −x)Ag₂SO₄−(x)BaSO₄, wherex=0·01 to 0·6, were prepared by slow cooling of the melt. The extent of the solid solubility of Ba²⁺ in Ag₂SO₄ was determined by X-ray powder diffraction and scanning electron microscopy. The bulk conductivity of each sample was obtained using a detailed impedance analysis. The partial substitution of Ba²⁺ results in the enhancement of conductivity in compliance with the classical aliovalent doping theory. A simplistic model based on lattice distortion (expansion) due to partial substitution of Ag⁺ by the bigger Ba²⁺ has been considered to explain enhanced conductivity. Beyond solid-solubility limit (5·27 mole%) the BaSO₄-dispersed Ag₂SO₄ conductivity follows the usual trend seen in binary systems. An increase in conductivity in this case is discussed in the light of interfacial reactions and surface defect chemistry. The maximum conductivity in 20 mole% BaSO₄ dispersed Ag₂SO₄ is due to percolation threshold.     

激光微焊接质量的模糊识别技术研究

讨论了激光微焊点焊接质量的模糊识别的概念，数学模型及其应用方法，并介绍了系统的硬件组成。     

几何造型的自由畸变方法

几何造型是计算机图形学的重要研究内容，ＣＡＤ／ＣＡＭ的核心技术，现行的许多造型系统仅限于造型二次曲面及旋转曲面，没有自由曲面造型能力，本文研究的自由畸变为法，很容易扩展这些系统的自由曲面造型功能，该方法已成功地用于扩展ＭＯＶＩＥ．ＢＹＵ系统的自由曲面造型功能。     

模糊数学在电视机故障诊断中的应用

本文介绍了应用模糊数学方法进行计算机辅助诊断电视机的故障原因,这种方法有效性在于建立模型的因果关系正确性和自动搜索范围及速度。     

A fuzzy diagnosis approach using dynamic fault trees

By incorporating digraph models, fault trees and fuzzy inference mechanisms in a unified framework, a novel approach for fault diagnosis is developed in this work. To relieve the on-line computation load, the fault origins considered in diagnosis are limited to the basic events in the cut sets of a given fault tree. The symptom occurrence order associated with each root cause is derived from system digraph with the qualitative simulation techniques. The implied candidate patterns are enumerated according to two proposed theorems and then encoded in the inference system with IF-THEN rules. The simulation results show that the proposed approach is not only feasible but also capable of identifying the most likely cause(s) of a hazardous event at the earliest possible time.     

Studies on nucleation kinetics of InxGa1−xN/GaN heterostructures

Nucleation kinetics during the growth of In_xGa_1−xN on a GaN substrate have been studied. The behavior of nonequilibrium between the In_xGa_1−xN and the GaN substrate has been analyzed, and hence, the expression derived for the stress-induced supercooling/superheating has been numerically evaluated. The maximum amount of stress-induced supercooling is found to be 1.017 K at x=0.12. These values are incorporated in the classical heterogeneous nucleation theory. Using the regular solution model, the interfacial tension between the nucleus and substrate and, hence, the interfacial tension between nucleus and mother phase and thermodynamical potential of the compounds have been calculated. The amount of driving force available for the nucleation has been determined for different compositions and degrees of supercooling. It has been shown that the value of the interaction parameter of InN-GaN plays a dominant role in nucleation and growth kinetics of In_xGa_1−xN on a GaN substrate. These values have been used to evaluate the nucleation parameters. It is shown that the nucleation barrier for the formation of a In_xGa_1−xN nucleus on a GaN substrate is minimum in the range of x=0.12 to x=0.17, and it has been qualitatively proved that good quality In_xGa_1−xN on GaN can be grown only in the range 0<x≤0.2.     

多判据模糊决策在工程爆破中的应用

本文介绍了多判据模糊决策的数学模型。该模型可广泛地用于工程爆破中的爆破方案比较,以及爆破试验中的最优爆破参数的决策。该模型的应用将有利于工程爆破试验及设计的计算机程序设计。