Dynamic Survivability in WDM Mesh Networks Under Dynamic Traffic

Network survivability is a crucial requirement in WDM mesh networks. In this paper, we systematically consider the problem of dynamic survivability with dynamic single link failure in WDM networks under dynamic traffic demands. Specifically, we investigate various protection schemes, such as dedicated path protection (DPP), shared path protection (SPP), dedicated link protection (DLP), shared link protection (SLP), and two restoration schemes, path restoration (PR) and link restoration (LR). Moreover, two new shared protection methods are proposed, i.e., SRLG-based shared link protection (SRLG-SLP) and SRLG-based shared path protection (SRLG-SPP). The SRLG (shared risk link group) constraint defines the availability of protection resources to a working path, which requires that any two working paths sharing the same risk of failure (or in the same SRLG) cannot share the same protection resources. Furthermore, in our study, we consider a more practical dynamic single-link failure model, in which the link-failure-interarrival time and link-failure-holding time are considered as two independent parameters. Based on this link-failure model, extensive simulations are done to analyze and compare the dynamic survivable performance of various protection and restoration schemes. Resource utilization, protection efficiency, restoration efficiency, and service disruption ratio are employed as survivable performance metrics versus traffic load, link-failure frequency, and link-failure reparation time to evaluate the survivable performance. Many meaningful results are given. In addition, we show that the developed SRLG-SLP and SRLG-SPP protection schemes perform very well in terms of protection efficiency and service disruption ratio, while sacrificing some performance in terms of resource utilization.     

Sol-gel preparation of a di-ureasil electrolyte doped with lithium perchlorate

Solid polymer electrolytes (SPEs) synthesized by the sol-gel process and designated as di-ureasils have been prepared through the incorporation of lithium perchlorate, LiClO₄, into the d-U(2000) organic-inorganic hybrid network. Electrolytes with lithium salt compositions of n (where n indicates the number of oxyethylene units per Li⁺ ion) between ∞ and 0.5 were characterized by conductivity measurements, cyclic voltammetry at a gold microelectrode, thermal analysis and Fourier transform Raman (FT-Raman) spectroscopy. The conductivity results obtained suggest that this system offers a quite significant improvement over previously characterized analogues doped with lithium triflate [S.C. Nunes, V. de Zea Bermudez, D. Ostrovskii, M.M. Silva, S. Barros, M.J. Smith, R.A. Sá Ferreira, L.D. Carlos, J. Rocha, E. Morales, J. Electrochem. Soc. 152 (2) (2005), A429]. “Free” perchlorate ions, detected in all the samples examined, are identified as the main charge carriers in the sample that yields the highest room temperature conductivity (n = 20). In the di-ureasils with n ≤ 10 ionic association is favoured and the ionic conductivity drops.     

A Review of Wavelets for Digital Wireless Communication

Wavelets have been favorably applied in almost all aspects of digital wireless communication systems including data compression, source and channel coding, signal denoising, channel modeling and design of transceivers. The main property of wavelets in these applications is in their flexibility and ability to characterize signals accurately. In this paper recent trends and developments in the use of wavelets in wireless communications are reviewed. Major applications of wavelets in wireless channel modeling, interference mitigation, denoising, OFDM modulation, multiple access, Ultra Wideband communications, cognitive radio and wireless networks are surveyed. The confluence of information and communication technologies and the possibility of ubiquitous connectivity have posed a challenge to developing technologies and architectures capable of handling large volumes of data under severe resource constraints such as power and bandwidth. Wavelets are uniquely qualified to address this challenge. The flexibility and adaptation provided by wavelets have made wavelet technology a strong candidate for future wireless communication. Madan Kumar Lakshmanan was born in Chennai, India, in 1979. He received the B.E. (with distinction) in electrical engineering from the University of Madras, Chennai, India, in 2000. He joined the Indian Software firm, Polaris Software Labs Ltd., in 2000 where he wrote software for Telecommunication applications. At Polaris, he was awarded the “On The Spot Of Excellence Award” for his efforts. In 2003, he moved to the Indian Institute of Technology-Madras, to develop and establish a wireless communications network for rural connectivity. In 2004, he was awarded the Royal Dutch/Shell Chevning scholarship to pursue a Master degree in Telecommunications at the Delft University of Technology (TUDelft). At TUDelft he is affiliated to the International Research Center for Telecommunications-Transmission and Radar (IRCTR) where he is undertaking research in the field of wavelets applications in Wireless Communications. Homayoun Nikookar received his Ph.D. in Electrical Engineering from Delft University of Technology (TUDelft), The Netherlands, in 1995. From 1995 to 1998 he was a postdoc researcher at the International Research Center for Telecommunications-Transmission and Radar, TUDelft, where since 1999 he has been an Assistant Professor. Dr. Nikookar has done research on different areas of wireless communications, including wireless channel modeling, UWB, MIMO, multicarrier transmission, Wavelet-based OFDM and CDMA. He is a senior member of the IEEE.     

Transformations in machining. Part 1. enhancement of wavelet transformation neural network (WT-NN) combination with a preprocessor

Properly selected transformation methods obtain the most significant characteristics of metal cutting data efficiently and simplify the classification. Wavelet Transformation (WT) and Neural Networks (NN) combination was used to classify the experimental cutting force data of milling operations previously. Preprocessing (PreP) of the approximation coefficients of the WT is proposed just before the classification by using the Adaptive Resonance Theory (ART2) type NNs. Genetic Algorithm (GA) was used to estimate the weights of each coefficient of the PreP. The WT-PreP-NN (ART2) combination worked at lower vigilances by creating only a few meaningful categories without any errors. The WT-NN (ART2) combination could obtain the same error rate only if very high vigilances are used and many categories are allowed.     

基于概念网络的文本信息监控技术

由于网上信息的迅速增长,文本信息监控已经成为网上信息管理中的热点研究课题。本文在模糊集和语义网络的理论基础上,构建了模糊值动态约束性概念网络,介绍了该概念网络的基本构建方法,并提出了基于概念网络的文本分析算法。     

基于遗传算法的工作辊温度场参数优化模型

针对热连轧机工作辊热辊形计算中温度场模型的热交换等参数难以确定的问题 ,建立了基于遗传算法的参数优化模型 ,可以解决复杂条件下的热参数的求解问题。利用优化参数计算的轧辊温度场与实际测量结果一致。     

Empirical modelling of shear strength of RC deep beams by genetic programming

This paper investigates the feasibility of using genetic programming (GP) to create an empirical model for the complicated non-linear relationship between various input parameters associated with reinforced concrete (RC) deep beams and their ultimate shear strength. GP is a relatively new form of artificial intelligence, and is based on the ideas of Darwinian theory of evolution and genetics. The size and structural complexity of the empirical model are not specified in advance, but these characteristics evolve as part of the prediction. The engineering knowledge on RC deep beams is also included in the search process through the use of appropriate mathematical functions.The model produced by GP is constructed directly from a set of experimental results available in the literature. The validity of the obtained model is examined by comparing its response with the shear strength of the training and other additional datasets. The developed model is then used to study the relationships between the shear strength and different influencing parameters. The predictions obtained from GP agree well with experimental observations.     

Application of artificial neural networks to the analysis of two‐dimensional fluorescence spectra in recombinant E coli fermentation processes

A two‐dimensional (2D) spectrofluorometer was used to monitor various fermentation processes with recombinant E coli for the production of 5‐aminolevulinic acid (ALA). The whole fluorescence spectral data obtained during a process were analyzed using artificial neural networks, ie self‐organizing map (SOM) and feedforward backpropagation neural network (BPNN). The SOM‐based classification of the whole spectral data has made it possible to qualitatively associate some process parameters with the normalized weights and variances, and to select some useful combinations of excitation and emission wavelengths. Based on the classified fluorescence spectra a supervised BPNN algorithm was used to predict some of the process parameters. It was also shown that the BPNN models could elucidate some sections of the process's performance, eg forecasting the process's performance. Copyright © 2005 Society of Chemical Industry     

Linearly many faults in Cayley graphs generated by transposition trees

We prove that when linearly many vertices are deleted in a Cayley graph generated by a transposition tree, the resulting graph has a large connected component containing almost all remaining vertices.     

Genetically optimized fuzzy polynomial neural networks with fuzzy set-based polynomial neurons

In this paper, we propose and investigate a new category of neurofuzzy networks—fuzzy polynomial neural networks (FPNN) endowed with fuzzy set-based polynomial neurons (FSPNs) We develop a comprehensive design methodology involving mechanisms of genetic optimization, and genetic algorithms (GAs) in particular. The conventional FPNNs developed so far are based on the mechanisms of self-organization, fuzzy neurocomputing, and evolutionary optimization. The design of the network exploits the FSPNs as well as the extended group method of data handling (GMDH). Let us stress that in the previous development strategies some essential parameters of the networks (such as the number of input variables, the order of the polynomial, the number of membership functions, and a collection of the specific subset of input variables) being available within the network are provided by the designer in advance and kept fixed throughout the overall development process. This restriction may hamper a possibility of developing an optimal architecture of the model. The design proposed in this study addresses this issue. The augmented and genetically developed FPNN (gFPNN) results in a structurally optimized structure and comes with a higher level of flexibility in comparison to the one we encounter in the conventional FPNNs. The GA-based design procedure being applied at each layer of the FPNN leads to the selection of the most suitable nodes (or FSPNs) available within the FPNN. In the sequel, two general optimization mechanisms are explored. First, the structural optimization is realized via GAs whereas the ensuing detailed parametric optimization is carried out in the setting of a standard least square method-based learning. The performance of the gFPNN is quantified through experimentation in which we use a number of modeling benchmarks—synthetic and experimental data being commonly used in fuzzy or neurofuzzy modeling. The obtained results demonstrate the superiority of the proposed networks over the models existing in the references.