Psychological separation, attachment security, vocational self-concept crystallization, and career indecision: A structural equation analysis.

Structural equation modeling was used to test theoretically based models in which psychological separation and attachment security variables were related to career indecision and those relations were mediated through vocational self-concept crystallization. In contrast to previous studies, which have found either weak or no support for a relation between separation or attachment security variables and career indecision, results based on a sample of 350 college students indicated that some components of separation and attachment security did relate to career indecision in a theoretically supportable direction. Results also revealed that regardless of whether global or component career indecision measures were used, separation and attachment security effects on indecision were at least partially mediated through vocational self-concept crystallization. The strongest mediated relations were observed for the effects of attachment anxiety and maternal separation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

压电陶瓷微位移器件迟滞模型的研究

在通过统计物理学角度分析压电陶瓷迟滞规律的基础上，结合数学建模方法，提出了一种简单实用的压电陶瓷迟滞数学模型。并设计了压电陶瓷实验控制系统，对迟滞数学模型进行了验证，实验结果表明，此模型可以有效减小压电陶瓷的迟滞非线性误差，提高压电陶瓷微位移的控制精度，本研究有助于实现基于压电陶瓷的高精度开环微位移控制。     

An inverse solution methodology for estimating the diffusion coefficient of gases in Athabasca bitumen from pressure-decay data

An inverse solution methodology is developed for the estimation of diffusion coefficient of gases in highly viscous, oil-sands bitumens from isothermal, pressure-decay measurements. The approach involves modeling the rate of change in pressure using the diffusion equation for the liquid phase coupled with a mass balance equation for the gas phase. The inverse solution framework is utilized to arrive at two graphical techniques for estimating the diffusion coefficient. Both techniques involve the determination of the slope of a straight line resulting from plotting the experimental data in accordance with the developed model. An advantage of the proposed techniques is that the diffusion coefficient is estimated directly, i.e. without making it an adjustable parameter. The novelty of the proposed method is in its simplicity as well as its ability to isolate portions of the pressure-decay data affected by experimental fluctuations. The effect of the initial pressure on the predicted diffusion coefficient and pressure-decay profile was also investigated. The diffusion coefficients of CO₂, CH₄, C₂H₆ and N₂ in Athabasca bitumen at 50–90 °C and about 8 MPa were estimated and compared with literature values.     

定轴转动与基础激励下梁的非线性动力学

采用Kane方程，建立了含耦合的几何及惯性非线性项的定轴转动与轴向基础激励联合作用下柔性梁的非线性动力学控制方程组，该方程组不仅包含二次及三次非线性项，而且体现了参数激励与外激励的联合作用。运用多尺度法，研究了匀转速，顺臂安装下悬臂梁的一阶模态主参激共振与外激励1/2次亚谐共振同时作用时梁的一阶近似稳态响应。结果表明，梁的一阶模态幅频特性将受到转速，旋转半径和激励幅值等参数变化的显著影响。     

Measuring and modeling the rheological data of diglycidylether of bisphenol‐A during polymerization for finite element analyses

Finite element analyses (FEA) of thermosets are often performed on the basis of rheological data for fully cured resin. For the FEA of thermosets during curing, a material model is established and a technique is demonstrated, which allows the rheological data of the linear viscoelastic material to be derived. As the moduli are sensitive to conversion, all measured properties are related to temperature and conversion. Therefore the basis for the rheological data has to be a suitable reaction kinetic. Based on the kinetics shear and compression properties are measured independently and modeled mathematically with the focus to gain a formulation, which is suitable for FEA. The considered time constants are in the range between one second and one month as these times are relevant for the investigated relaxation times. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1868–1872, 2003     

FLOW OF NEWTONIAN FLUIDS THROUGH SINUSOID ALLY CONSTRICTED TUBES. NUMERICAL AND EXPERIMENTAL RESULTS

Numerical and experimental predictions of pressure drops in the flow of Newtonian fluids through sinusoidally constricted tubes (SCT) are carried out. The numerical evaluations analyzed in this work are obtained from the following methods: Geometric Iteration (GJM), Geometric Iteration with First and Second Upwinds (GIM1, GIM2), Successive Over Relaxation by Line (SORBLM), Global Galerkin Spectral Method (GGSM), Collocation (CM) and Dufort-Frankel (DFM). The GIM1, GIM2 and SORBLM are applied to SCT and explained in this work. The other methods have been previously reported in the literature with the same purpose. Experiments are accomplished for constrictions of approximately 40,60 and 80% of the average tube diameter and results compare well with numerical predictions of the steady flow. It is concluded that special attention should be given to evaluations of the friction factor ƒ for Reynolds numbers Re between the onsets of flow separation and turbulence due to flow instability. Finally, the SCT as a model for porous media (PM) is discussed.     

Data fitting with a spline using a real-coded genetic algorithm

To obtain a good approximation for data fitting with a spline, frequently we have to deal with knots as variables. The problem to be solved then becomes a continuous nonlinear and multivariate optimization problem with many local optima. Therefore, it is difficult to obtain the global optimum. In this paper, we propose a method for solving this problem by using a real-coded genetic algorithm. Our method can treat not only data with a smooth underlying function, but also data with an underlying function having discontinuous points and/or cusps. We search for the best model among candidate models by using the Bayes Information Criterion (BIC). With this, we can appropriately determine the number and locations of knots automatically and simultaneously. Five examples of data fitting are given to show the performance of our method.     

Numerical Modeling of Silicon Photodiodes for High-Accuracy Applications Part I. Simulation Programs

The suitability of the semiconductor-device modeling program PC-1D for high-accuracy simulation of silicon photodiodes is discussed. A set of user interface programs optimized to support high-accuracy batch-mode operation of PC-1D for modeling the internal quantum efficiency of photodiodes is also described. The optimization includes correction for the dark current under reverse- and forward-bias conditions before calculating the quantum efficiency, and easy access to the highest numerical accuracy available from PC-1D, neither of which is conveniently available with PC-1D’s standard user interface.     

电磁铸造液柱高度数学模型的建立及应用

为了研究熔体金属电磁立柱成形能力并计算电磁作用下的液注高度,从电磁铸造立柱成形的基本原理出发,建立了电磁场作用下金属立柱成形时液柱高度数学模型,并试验验证了模型的准确性.利用液柱高度数学模型对铝、钢、锡铅合金等金属的电磁铸造可行性,以及电力参数对液柱高度的影响进行研究.结果表明:铝电磁无模成形能力最强,而钢及锡铅合金电磁无模成形能力则基本相同;钢及锡铅合金电磁立柱成形所需的磁感强度约为0.08～0.10 T,而铝则只需约0.04T.     

成组技术和造船模式的发展

本文论述了ＧＴ是造船模式进步的思想基础，并阐明了ＧＴ在ＳＣＩＭＳ中的作用．