Equivalent turbogenerator model for design of multivariable controllers in multimachine systems

The design of multivariable controllers for turbogenerators is usually based on single-machine infinite-bus representations, which are not valid for multimachine power systems. Alternatively, an overall control strategy may be sought for all the generators in the system, but this arrangement is not feasible in practice and involves major mathematical difficulties. The paper describes a method for designing physically-realizable multivariable controllers for individual turbogenerators in multimachine systems, without the assumption of an infinite bus. This employs an equivalent model for each generator, which includes the effects of interconnections with other units in the power system. The method has been used to design optimal state-space controllers for a three-machine system, and results obtained by nonlinear computer simulation show that good performance is achieved.     

One-step decomposition method for numerical integration of short- and long-term dynamics

A mathematical model is derived and disdussed that represents the structural properties of the alternative linearity and of the triangular block structural connectivity of the sets of differential equations, associated with the machines in the numerical integration of short- and long-term dynamics. In order to take into consideration the structural properties of the model, a one-step decomposition method for the numerical integration of short- and long-term dynamics is proposed. The method can be applied not only to the numerical integration of short- and long-term dynamics but also to all other cases when the model of the dynamic system is alternative-linear and triangular block connected. Numerical stability, accuracy and computation speed are the major advantages of this method, making it suitable for many applications, including the dynamic security analysis of power systems.     

Fabrication of boron doped diamond microband electrodes for electrochemical detection in a microfluidic channel

The manufacturing and electrochemical characterisation of an array of 20 boron doped nanocrystalline diamond (BNCD) microband electrodes for use in a poly(dimethylsiloxane) (PDMS) based microfluidic system are described. The electrodes were fabricated by plasma etching of a silicon oxide- and BNCD thin film coated silicon wafer and the resulting surface structured silicon wafer was subsequently bonded to the PDMS so that the BNCD microband electrodes were located within the PDMS microchannel. The electrochemical performance of the BNCD electrodes was studied and the electrodes were found to exhibit significantly better stability than previously employed gold microband arrays.     

Novel visible photoinitiators systems for free-radical/cationic hybrid photopolymerization

Free radical/cationic hybrid photopolymerization of acrylates and epoxides was induced using an initiator system comprised of the dye derivative 5,12-dihydroquinoxalino[2,3-b]quinoxaline or 5,12-dihydroquinoxalino[2,3-b]pyridopyrazine as the sensitizers and hexafluoroantimonate triarylsulfonium salt as the initiators. The curing experiments were carried out in the presence of air and the consumption of each monomer upon VIS-radiation was monitored in situ by real-time infrared spectroscopy. Hardness (H), elastic modulus (E) and the H/E ratio of the coatings obtained by visible-initiated acrylate/epoxide hybrid photopolymerization were determined using nanoindentation. DSC measurements show that the initiator system presented here may produce an interpenetrating polymer network. The pencil hardness of the obtained coatings indicates that the dye/hexafluoroantimonate triarylsulfonium salts systems studied here may have practical applications as visible-light hybrid initiators.     

A jet mixing study in two phase gas-liquid systems

All studies concerned with jet mixing have been focused on liquid phase systems and no studies have been found on jet mixing for gas-liquid two phase systems. In the present study the use of jet fluid as a mixer in gas-liquid systems was proposed. Further by installing an experimental setup, the mixing behavior of liquid phase was studied. Gas flow and jet flow are injected to the mixing vessel countercurrently. In this study, the effect of jet injection, location of the conductivity probe, aeration rate and jet Reynolds number on the mixing time are investigated. The created flow pattern was extracted for each condition and the results often analyzed on the basis of them. It is observed that, for low aeration rates, the injection of jet decreases the mixing time considerably. By increasing the aeration rate, the difference in mixing times between the two cases of jet injection and without jet is reduced. Results also show that the closer the probe is to encounter location of the jet and airflow, the lower the mixing time obtained. Dependence of mixing time on the probe location decreases by increasing the mixing intensity and eliminating dead zones. It is obtained, on the basis of Re_j and the amount of jet travelling in the vessel, increasing the aeration rate has different effects on the performance of mixing. Generally, four different trends for the variation of mixing time with increasing the aeration rate are observed.     

Discrete element analysis of experiments on mixing and stoking of monodisperse spheres on a grate

Understanding the details of the mixing and stoking process on grate firing systems is crucial for the optimization of the combustion process in waste or biomass incineration plants. The Discrete Element Method (DEM) can help to obtain further information on the mixing process within a bed of fuel particles. Especially the influence of a change in operational parameters can be examined avoiding large experimental effort. In the current paper five simulations for a generic grate are compared with the corresponding experiments. The experiments were carried out throughout an anterior parameter study on mixing and stoking on a grate [Sudbrock F.; Simsek E.; Wirtz S.; Scherer V.: “An experimental analysis of the influence of operational parameters on mixing and stoking of a monodisperse granulate on a grate”, Powder Technology 198, Issue 1, 29-37, 2010] [19]. The system considered is equipped with vertically moving bars which induce stoking. In a first approach monodisperse plastic spheres are used. The grate is encased by a transparent polycarbonate housing which provides optical access to the movement of the particles in the wall planes. The mixing process is measured and quantified by image analysis of the front wall of the grate. The mixing behaviour of the particle assembly observed in experiments and simulation appears to be very similar indicating that DEM is able to predict the particle mixing in the bed. In order to quantify the visual observations the mixing behaviour has been evaluated by different mixing parameters. They are compared in dependence of the number of strokes of the grate bars. A good agreement between measurements and simulations could be observed.     

Encapsulation of Drug Molecules by Cucurbiturils: Effects on their Chemical Properties in Aqueous Solution

The effects of the encapsulation of drugs and other molecules of biomedical interest by cucurbit[n]uril (n=5–8, 10) host molecules on the chemical properties of the drugs in aqueous solution are reviewed. The cucurbituril complexation of drug molecules has been shown to generally increase the guests’ pK_a values through preferential inclusion of the protonated species, modulate other equilibria involving the guest, improve the solubility in aqueous solution, reduce the toxicity and other side effects, as well as enhance the stability and targeted delivery of the drug molecule. These benefits have led to an increasing interest in the applications of cucurbit[n]urils in novel drug formulations.     

Ultrastable Host–Guest Complexes and Their Applications

This review describes monovalent synthetic receptor–ligand (or host–guest) pairs with extremely high binding affinity, comparable to that of the biotin–avidin pair, and their applications. Cucurbit[7]uril (CB[7]), a member of the host family cucurbit[n]uril (CB[n], n=5–8, 10), forms ultrastable host–guest complexes with ferrocene-, adamantane- or bicyclo[2.2.2]octane-based molecules having ammonium groups properly positioned to interact with the carbonyl oxygens at the portals of CB[7]. The extremely high affinity is achieved by a large enthalpic gain arising from the near perfect size/shape complementarity between the rigid CB cavity and the rigid core of the guest molecules, with the critical assistance of the positive entropy change due to the extensive dehydration of the host and guest. The high stability of the complexes allowed us and others to explore several biological applications such as immobilization of biomolecules on a solid surface, protein isolation, triggering intracellular events, and regulating enzymatic activities. These complexes with their exceptional affinity, chemical robustness, simple preparation, biocompatibility, and easy handling may replace the biotin–(strept)avidin system in diverse areas of research, including affinity chromatography, high throughput biochemical assays, imaging, and sensor technologies.