汽油机爆震强度的分析

分析了汽油机缸内气体爆震燃烧压力的频率特性并推导了爆震压力共振频率计算公式。研究表明：在爆震工况下，缸内压力在高频域中有几个共振峰，峰的大小表明了汽油机爆震强度。汽油机的表面振动在这些共振频率峰处也出现相应振动峰。表面振动峰与缸力压内峰值近似成正比。汽油机表面振动峰值可作为爆震强度的评价指标，该结论在ＣＡ１１０２汽油机上得到了证实。     

厚度伸缩压电陶瓷振子

对厚度伸缩压电陶瓷振子的振动状态进行了分析,并得到其等效电路.推导了振子的谐振频率、反谐振频率以及等效电路参数与振子尺寸、振子材料的介电、压电、弹性常数间的关系式.最后讨论了振子的一些特性和制作.     

高速列车浮式地板振动响应有限元分析

针对采用试验方法开发高速列车浮式地板耗时耗力,且试验规模小,不能反映整车的振动效果的问题,基于有限元法进行高速列车振动响应分析.对三明治夹芯理论、蜂窝板理论和等效板理论进行比较,确定采用等效板理论数值模拟某浮式地板中的蜂窝板;利用橡胶材料的超弹性理论拟合橡胶材料参数;建立完整模型模拟实际工况下浮式地板的振动响应,得到浮式地板的隔振效果.结果表明此浮式地板的隔振效果约为90%,满足设计要求.     

基于Shannon熵的飞机交流发电机振动分析

飞机交流发电机是飞机关键部件之一,监测其健康状况具有重要意义。通过设计实验数据获取平台采集交流发电机在转速上升(从6000转/分到8500转/分)、平稳运行(7500转/分)及转速下降(8500转/分到6000转/分)三个阶段的振动信号,利用符号序列Shannon熵的计算方法以及符号化方法设定合适参数对振动信号进行了处理,得出了交流发电机在三个阶段的振动信号的Shannon熵;通过初步的分析表明,交流发电机在正常状态下三个阶段的Shannon熵都比较有规律的在一定范围内变化,一旦发生振动异常将会引起Shannon熵突变;经过分析讨论,Shannon熵的突变与否是可以用来反映交流发电机在机械方面是否存在故障隐患的。     

CO2压缩机强烈振动的频谱诊断与治理对策

通过对安庆石化总厂化肥厂ＣＯ＿２压缩机多起强烈振动信号的频谱分析，找出了谱图上的一些规律性特征，并在理论上加以解释，文章还提出了现场应急处理的对策以及根治办法。     

Response of the seated human body to whole-body vertical vibration: biodynamic responses to sinusoidal and random vibration

The dependence of biodynamic responses of the seated human body on the frequency, magnitude and waveform of vertical vibration has been studied in 20 males and 20 females. With sinusoidal vibration (13 frequencies from 1 to 16 Hz) at five magnitudes (0.1–1.6 ms^? 2 r.m.s.) and with random vibration (1–16 Hz) at the same magnitudes, the apparent mass of the body was similar with random and sinusoidal vibration of the same overall magnitude. With increasing magnitude of vibration, the stiffness and damping of a model fitted to the apparent mass reduced and the resonance frequency decreased (from 6.5 to 4.5 Hz). Male and female subjects had similar apparent mass (after adjusting for subject weight) and a similar principal resonance frequency with both random and sinusoidal vibration. The change in biodynamic response with increasing vibration magnitude depends on the frequency of the vibration excitation, but is similar with sinusoidal and random excitation.     

Response of the seated human body to whole-body vertical vibration: discomfort caused by sinusoidal vibration

Frequency weightings for predicting vibration discomfort assume the same frequency-dependence at all magnitudes of vibration, whereas biodynamic studies show that the frequency-dependence of the human body depends on the magnitude of vibration. This study investigated how the frequency-dependence of vibration discomfort depends on the acceleration and the force at the subject–seat interface. Using magnitude estimation, 20 males and 20 females judged their discomfort caused by sinusoidal vertical acceleration at 13 frequencies (1–16 Hz) at magnitudes from 0.1 to 4.0 ms^? 2 r.m.s. The frequency-dependence of their equivalent comfort contours depended on the magnitude of vibration, but was less dependent on the magnitude of dynamic force than the magnitude of acceleration, consistent with the biodynamic non-linearity of the body causing some of the magnitude-dependence of equivalent comfort contours. There were significant associations between the biodynamic responses and subjective responses at all frequencies in the range 1–16 Hz.

Practitioner Summary: Vertical seat vibration causes discomfort in many forms of transport. This study provides the frequency-dependence of vibration discomfort over a range of vibration magnitudes and shows how the frequency weightings in the current standards can be improved.     

Validity and inter-observer reliability of subjective hand-arm vibration assessments

Exposure to mechanical vibrations at work (e.g., due to handling powered tools) is a potential occupational risk as it may cause upper extremity complaints. However, reliable and valid assessment methods for vibration exposure at work are lacking. Measuring hand-arm vibration objectively is often difficult and expensive, while often used information provided by manufacturers lacks detail. Therefore, a subjective hand-arm vibration assessment method was tested on validity and inter-observer reliability.     

电泵井振动监测及传输系统设计

潜油电泵机组是具有超细长转轴的复杂旋转机械,有复杂的生产及安装工艺,且采用了多级离心泵,在生产过程中会产生强大的振动源,测量并分析机组振动状况,是评估潜油电泵机组的运行状况、提高可靠性的重要手段。本文采用MMA3201振动加速度计监测振动状况,并采用4 mA²0 mA电流环将信号传输到井上MCU进行分析处理,根据监测和处理结果,适时提泵检修,采取合理的减振措施,延长潜油电泵的使用寿命。     

Heat capacities of polyethylene and linear fluoropolymers

Heat capacities at constant pressure, C_p, and at constant volume C_v, were calculated with the help of normal mode frequency spectra and compared to experimental data for crystalline or semicrystalline polyethylene, poly(vinyl fluoride), poly(vinylidene fluoride), polytrifluooroethylene and poly(tetrafluoroethylene). A calculation scheme using a Tarasov function for 2N skeletal vibrational modes and an approximation of the residual 7N normal modes from known data on polyethylene and polytetrafluoroethylene is developed for all homologous, linear fluoropolymers. N is the number of carbon backbone atoms of the repeating unit. Calculations can be carried out over the whole temperature range 0 K to melting. For the two theta temperatures and the constant A₀ used for C_v to C_p conversion, fluorine-concentration dependent curves are given. The relations are expected to hold also for copolymers and blends of intermediate fluorine contents. Recommended experimental (data bank) heat capacities agree to ±2.5% with the calculations.