变形体温度场和位移场的计算

本文用热源法对简单热传导问题进行了解析解的计算，并应用PDE工具箱求解热传导偏微分方程得到数值解。通过两种温度场的计算结果求出相应的位移场结果，比较可知MATLAB中PDE工具箱对难以用解析法求解的热传导问题有一定的指导作用。     

硬质合金冷挤压凹模的热处理强化

本文叙述了ＷＣ－Ｃｏ硬质合金特别是ＹＧ２５牌号硬质合金的渗硼淬火热处理强化工艺和不同钴含量的合金的强化处理效果以及强化处理的合金应用效果，并对其强化机理进行了讨论。     

中空螺旋状不锈钢冷却水喷头的熔模精密铸造

采用熔模精密铸造工艺，生产中空螺旋状不锈钢冷却水喷头，其工艺要点是，采用热型重力浇注，在高温下进行自由浇注。同时采用先慢后快，流量由小到大的浇注方法。结果表明：铸件表面光洁，无砂眼、气孔等缺陷，铸件合格率高于90％；在实际使用中，雾化区域直径大于1．5m，雾化率大于90％，喷雾效果稳定良好；盐雾试验2000h没有锈蚀，具有优良的耐磨性和耐腐蚀性。     

拧紧力矩和热应力对螺纹插装阀的影响分析

在分析螺纹插装阀整体结构和工作原理的基础上,建立螺纹插装阀阀套与阀芯间隙变化量在拧紧力矩和热应力作用下的理论计算模型,通过理论计算分析其间隙的变化规律,同时结合有限元分析结果对计算模型进行初步验证。结果表明:该计算模型可以用于分析螺纹插装阀在热应力下的使用性能,对螺纹插装阀的设计使用具有一定的指导意义。     

SiCp/Cu包覆粉体及其热沉材料的制备

采用化学镀铜工艺制备了Cu包覆SiCp复合粉体,并对复合粉体的组成和形貌进行了分析.同时,利用制得的复合粉体,结合适当的热压烧结工艺制备了Cu-35SiCp热沉材料,并对热沉材料的微观组织和热物理性能进行了研究.结果表明,SiCp颗粒在热沉材料的基体中均匀分布,界面结合良好.在试验条件下,Cu-35SiCp热沉材料的导热系数为165.7 W/(m·K),30～200 ℃温度区间内的热膨胀系数为15.1×10-6/K.     

Heat capacity of liquid and undercooled liquid metals and alloys

Trends in the dependences on temperature and concentration of experimentally determined heat capacities of liquid and undercooled liquid metals and alloys are discussed. A new adiabatic calorimeter for determining the heat capacity of liquid alloys up to 1500 K is described. The ability of several approximations and models to describe the different characteristics of the heat capacity of liquid and supercooled liquid metals and alloys is demonstrated.     

High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs

High resolution XPS analysis of chemical functionalised multi-wall carbon nanotubes (MWCNTs) and single wall carbon nanotubes (SWCNT) was done with ESCA300 (overall instrument resolution of 0.35 eV). Information to the degree of functionalisation was ascertained by argon ion bombardment of the samples followed by XPS analysis to detect the functional groups, the percentage atomic concentration of various elements present and whether or not the detected functional groups imposed a chemical shift on the CNT atoms. The results show that true chemical functionalisation was achieved and by argon ion bombardment these functional groups can be altered relative to the C 1s carbon atoms of the CNT. The choice of chemicals used for functionalisation, the techniques employed and the types of nanotubes treated are important factors in chemical characterisation. The carbon atom on the nanotube ring to which the functional group (atom) is bonded, the chirality of the CNT, the electronegativity of the functional group, the bond type and whether the CNT is single-wall or multi-wall, or cut (short) could play a role in determining the chemical shift on the CNTs atoms. These investigations are relevant to chemical functionalisation of carbon nanotubes for various applications for example DNA sensors and other biomedical sensors.     

高温高压设备瞬态密封分析的三维力学与传热学模型

以大型加氢反应器的高压法兰密封结构为研究对象，建立了瞬态及稳态密封分析的三维力学与传热学模型，主要解决了螺栓载荷的动态模拟和螺栓孔内空气环层的传热计算问题。利用该模型对加氢反应器的瞬态及稳态密封状况进行了计算。     

HEAT TRANSFER BETWEEN ROUGH SURFACES IN CONTACT OVER A HIGHLY ELLIPTICAL CONTOUR AREA: COMPARISON OF EXPERIMENTAL AND NUMERICAL RESULTS

This paper describes experimental and numerical studies of heat transfer between surfaces in contact over a highly elliptical area in a gas or in vacuum. Measurements of the steady-state thermal resistance of a high aspect ratio contact formed between cylindrical steel surfaces with widely different radii of curvature (76 cm vs 0.95 cm) are reported for two levels of surface roughness (0.05 μm and 1.0 μm rms) and compared to 3-D numerical results obtained with the multigrid method. Theoretical results obtained by evaluating the contact conductance acting over each surface element within the contour area with a method developed previously for rough but nominally flat surfaces are shown to be in excellent agreement with the rough surface experimental data.     

HEAT TRANSFER IN PARTIALLY MISCIBLE TERNARY SYSTEMS

In the study of mass transfer between partially miscible liquids, temperature perturbations have been found to have an important effect in the generation of interfacial activity. Micro- and macro-generated interfacial convection usually occurs in combination with one another even in fairly simple heat or mass transfer events. These combinations are responsible for the enhancement of mass transfer rates. In an effort to acquire a better understanding of the heat transfer effects in ternary liquid-liquid systems, temperature difference profiles were measured when contacting two partially miscible phases. A vertical and a rotational transfer cell were designed to contact the partially miscible phases without inducing external disturbances. Five thermocouples were immersed in the bottom liquid phase at predetermined positions below the interface. In order to understand the influence of the convection generated, the vertical cell was designed to hinder convection in one phase, while the rotational cell permits convection in both phases. The experimental results showed larger temperature differences in the rotational cell after the contact of the phases. Also, systems which were initially unsaturated presented larger heat effects than those in which the partially miscible solvents were initially saturated. Several parameters indicating the importance of heat effects in the ternary systems studied are reported.