Determination of gas dispersion in vapor extraction of heavy oil and bitumen

In this work, a mathematical model is developed and simulated to determine gas dispersion along with solubility during the vapor extraction (Vapex) of live oil from a laboratory scale physical model. The physical model is a rectangular block of homogenous porous medium saturated with heavy oil and bitumen. At a given temperature and pressure, the block is initially exposed on its side to a solvent gas, which diffuses into the medium and gets absorbed. The absorption of gas reduces the viscosity of heavy oil and bitumen causing it to drain under gravity. The low-viscosity “live oil” is produced at the bottom of the porous block. The production of live oil with time is accompanied by the shrinkage of oil in the block as well as its increased exposure to gas from top. These phenomena of Vapex are described by the mathematical model, which is used to calculate live oil production with various values of gas solubility and dispersion. Their optimal values are determined for the vapor extraction of Cold Lake bitumen with butane by matching calculated live oil production with its experimental values published earlier.     

金属材料中的稀土元素

本文论述了俄罗斯对稀土元素在高强度钢、高温合金、铝合金、镁合金、粉末冶金和磁性材料中的应用及其发展。     

Results from the monitoring of pesticide residues in fruit and vegetables on the Danish market, 2000-01

To check compliance with the maximum residue levels in foods and to monitor the residue levels to enable an evaluation of the exposure of the Danish population to pesticides, a monitoring programme for pesticides residues in fruit and vegetables was performed. Sampling plans were designed based on previous findings and on consumption data. Samples (n = 4404) of mainly fresh conventionally and organically grown fruit and vegetables were collected at wholesalers and importers and at food processing companies. Of the samples, 3% were frozen products and 5% organically grown. Of the samples, 34% were of Danish origin, with 66% from other countries. Two accredited laboratories performed analyses of the samples using capillary gas chromatography, liquid chromatography and a spectrophotometric method. Reporting levels were set at the lowest calibration level or at the limit of determination. Residues were found in 60% of the samples of fruit but in only 18% of the vegetable samples. Residues above the maximum residue levels were found in 6% of all samples of fruit and in 2% of the vegetable samples.     

Influence of the deposition atmosphere on the characteristics of Pd–Mg thin films prepared by pulsed laser deposition

Bilayered palladium (30 nm thick)–magnesium (350 nm thick) thin films were prepared using the pulsed laser deposition technique in the presence of various background gases (Ar, He and a mixture He + H₂) under different partial pressures (47 and 27 Pa). According to the deposition atmosphere, the Pd/Mg interface shows either a sharp or an extended transition. The electrochemical hydriding properties and the mechanical stability upon cycling of the Pd/Mg film are greatly improved when an extended «intermixing» zone between the Pd and Mg layers is present. The Pd–Mg films prepared under pure helium fulfill these conditions.     

Electrokinetic remediation of soils contaminated with heavy metals

This paper describes the results obtained from an electrokinetic treatment of a real soil polluted by lead acetate. Powdered soil samples were pressed with a consolidometer till 100 kPa to obtain cylindrical specimens with the same characteristics as a subsoil. Tests were carried out in a Perspex electrochemical cell where soil specimens were introduced with a hollow punch. A low intensity direct current was applied in order to remove contaminants, due to electrophoresis and electroosmosis phenomena. The water flow, conductivity, apparent electroosmotic coefficient, as well as other characteristic parameters, were measured throughout the test. The water content and degree of pore saturation were estimated at the beginning and end of the test. The soil slab was divided into four slices and the Pb concentration profile determined. The main factor governing the extraction of contaminant was found to be the pH in the acidic range. Indeed, under these conditions high removal efficiencies could be reached. These results could lead to the design of a new electrochemical treatment cell equipped with a cationic membrane to expand the region of favourable pH within the soil.     

Sequentially Enhanced Electrokinetic Remediation of Heavy Metals in Low Buffering Clayey Soils

This paper presents the results of an experimental investigation undertaken to evaluate different purging solutions to enhance the removal of multiple heavy metals, particularly chromium, nickel, and cadmium, from a low buffering clay, specifically kaolin, during electrokinetic remediation. Experiments were conducted on kaolin spiked with Cr(VI), Ni(II), and Cd(II) in concentrations of 1,000, 500, and 250 mg/kg, respectively, which simulate typical electroplating waste contamination. A total of five different tests were performed to investigate the effect of different electrode purging solutions on the electrokinetic remedial efficiency. A constant DC voltage gradient of 1 V/cm was applied for all the tests. The removal of heavy metals from the soil using tap water as the purging solution was very low. When 1 M acetic acid was used as the purging solution in the cathode, the removal of chromium, nickel, and cadmium was increased to 20, 19, and 13%, respectively. Using 0.1 M ethylene diamine tetraacetic acid as the purging solution in the cathode, 83% of the initial Cr was removed; however, the nickel and cadmium removal was very low. A sequentially enhanced electrokinetic remediation approach involving the use of water as a purging solution at both the anode and cathode initially, followed by the use of acetic acid as the cathode purging solution and a NaOH alkaline solution as the anode purging solution was tested. This sequential approach resulted in a maximum removal of chromium, nickel, and cadmium of 68–71, 71–73, and 87–94%, respectively. This study shows that the sequential use of appropriate electrode purging solutions, rather than a single electrode purging solution, is necessary to remediate multiple heavy metals in soils using electrokinetics.     

铁水喷镁脱硫技术的应用

简述了涟钢铁水喷镁脱硫技术的设备概况、工艺流程和试生产情况。重点介绍处理过程的反应机理和控制方法，通过调整和改造，解决了钢水回硫的问题，实现了铁水脱硫-转炉-RH精炼炉-CSP的匹配。     

柳钢混铁炉炉衬结构及运行管理的技改实践

针对混铁炉使用过程中出现的各种侵蚀状况，设计采用砖砌十浇注复合炉衬结构，特别对前墙拐角和后墙中段等侵蚀快的关键部位作了有针对性的技术改进；在运行管理上，制定推行全新的工艺操作规程，取得了显著的使用效果。     

Hydroprocessing peculiarities of Fischer–Tropsch syncrude

When catalysts developed for crude oil hydroprocessing are used for syncrude, there are syncrude-specific peculiarities to consider. These relate to differences in the nature and abundance of heteroatoms, olefins, metal species, waxes and aqueous products. Some important aspects are (a) heat release during naphtha and distillate hydroprocessing is very high, but wax hydrocracking is almost isothermal; (b) syncrude is sulphur-free and the use of sulphided base-metal hydroprocessing catalysts require the addition of sulphur-containing compounds to the syncrude; (c) oxygenates strongly adsorb on some catalytic surfaces to affect catalytic behaviour; (d) carbonyl–carboxylic acid interconversion and water produced by hydrodeoxygenation (HDO) may result in catalyst degradation by acid and hydrothermal attack; (e) carboxylic acids in syncrude result in equipment corrosion and catalyst leaching; (f) metal carboxylates are the main metal-containing species in syncrude and are not removed by hydrodemetallation (HDM) catalysis, but by thermal decomposition.