Physics-guided logistic classification for tool life modeling and process parameter optimization in machining

This paper describes a physics-guided logistic classification method for tool life modeling and process parameter optimization in machining. Tool life is modeled using a classification method since the exact tool life cannot be measured in a typical production environment where tool wear can only be directly measured when the tool is replaced. In this study, laboratory tool wear experiments are used to simulate tool wear data normally collected during part production. Two states are defined: tool not worn (class 0) and tool worn (class 1). The non-linear reduction in tool life with cutting speed is modeled by applying a logarithmic transformation to the inputs for the logistic classification model. A method for interpretability of the logistic model coefficients is provided by comparison with the empirical Taylor tool life model. The method is validated using tool wear experiments for milling. Results show that the physics-guided logistic classification method can predict tool life using limited datasets. A method for pre-process optimization of machining parameters using a probabilistic machining cost model is presented. The proposed method offers a robust and practical approach to tool life modeling and process parameter optimization in a production environment.     

A novel vision-based method for 3D profile extraction of wire harness in robotized assembly process

Automating stages for deformable objects in the production line, in which assembling a wire harness into a predefined position is a complex task owing to the specialized characteristics of the objects. Besides a few automatized systems proposed in the other studies to implement this task under simplified setup conditions, a significant portion of this process remains to be completed manually in industrial environments. To construct an automatic wire harness assembly system, the development of a method that can automatically detect the wire harness profile in a 3D environment and, consequently, guide robot arms to implement assembly tasks is indispensable. Therefore, this study presents an approach that satisfies this requirement, which not only proposes a deep learning-based system to detect the wire profile, but also improves the accuracy of the detected results through a correction method according to the depth values of contiguous areas. The verification of the approach in a robot system that highlights its usefulness and practicality demonstrates the potential of the proposed method to replace people and consequently, reduce labour costs in factory environments.     

非部分嵌套信息结构的LQG动态队决策问题的可解性（II）*

本文讨论非嵌套信息结构的递阶队决策问题和控制均享信息结构的LQG分散控制问题,文中首先证明这两类问题的信息结构都是“部分控制嵌入”的,进而给出最优策略(或控制)存在的充要条件和当此条件成立时最优策略(或控制)的表达式。     

Semantic analysis in XTRA,an English — Chinese machine translation system

This paper concerns the resolution of lexical ambiguity in a machine translation environment. We describe the integration of principles of selection restrictions. Preference Semantics, and intelligent relaxation of constraints in handling lexical ambiguity. The approach differs from many previous MT systems in that it is more powerful than brute force systems, while more realistic than systems that assume a large degree of coded encyclopedia information for full understanding.     

基于机器视觉的隔热条尺寸测量系统

针对当前隔热条的尺寸测量仍停留在产品离线后,工作人员用卡尺测量,劳动强度大,工作效率低、测量精度易受人为因素影响的现状,本文提出将机器视觉技术引入到隔热条自动化生产线的在线尺寸检测系统中,这种非接触式测量既可以避免在测量过程中对隔热条的损坏,又可以提高测量精度和测量速度,从而达到提高测量效能的目的。     

基于HCPN的发电企业项目管理工作流建模

如何对工程项目的成本、进度、质量情况进行控制和跟踪是发电企业的重要问题,应用工作流可通过对业务流程的整合及资源的合理分配解决这一问题。本文基于分层着色Petri网(HCPN),将工作流过程模型的逻辑结构和语义与HCPN中的网结构进行映射,进而利用CPN-TOOLS定义基于HCPN的项目管理工作流过程模型,并利用化简原则对工作流模型进行畅通性验证。     

Particular behavior of spindle thermal deformation by thermal bending

Thermally induced errors reduce the accuracy in precision machining, and a great deal of research has been presented on compensation for these errors in machine tools. However, during the transition period after commencing or stopping spindle rotation, thermal deformation behavior is very complex. In particular, the y-directional movement of the vertical machining center cannot be explained by thermal expansion alone because of the relationship between deformation and temperature. Thermal bending that is generated from the thermal gradient in the structure causes this movement. In the research described in this paper, a theoretical explanation and an experimental verification is given for the particular behavior of spindle thermal deformation. As it is not easy to map the relationship of the compensation model, separation of the steady from the non-steady state in the mapping process is strongly recommended.     

Facile Hydrothermal Synthesis of Hierarchical Sodium P Zeolite as a Nonphosphate Detergent Builder

This study reports the preparation of hierarchical NaP zeolite with the aim of obtaining a non-phosphate detergent builder as an alternative for environmental remediation from eutrophication phenomenon. Hierarchically structured NaP zeolite was easily synthesized hydrothermally and under different syntheses conditions. Samples were characterized using several standard techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, and N₂ adsorption–desorption analysis. Three powder detergents were prepared by mixing main components such as linear alkylbenzene sulfonate, sodium sulfate, sodium silicate, and sodium carbonate as well as different amounts of as-synthesized zeolite and sodium tripolyphosphate in the detergent formulation as potential detergency builders. Some different detergency tests as pH value, water insolubility, foam height, moisture content, alcohol insolubility, and surface tension measurement were carried out for all synthetic detergent samples and two commercial ones. The results demonstrated that the high cleaning performance of the powders was obtained as using eco-friendly zeolite builders in comparison with phosphate-based commercial and synthetic detergent samples.     

A review of machine learning applications in IoT-integrated modern power systems

This paper aims to provide a systematic and comprehensive survey of state-of-the-art machine learning techniques and their potential applications in IoT-integrated power systems.     

Machine-Learning based methods in short-term load forecasting

Short-term load forecasting is of great significance to the secure and efficient operation of power systems. However, loads can be affected by a variety of external impact factors and thus involve high levels of uncertainties. So it is a challenging task to achieve an accurate load forecast. This paper discusses three commonly-used machine-learning methods used for load forecasting, i.e., the support vector machine method, the random forest regression method, and the long short-term memory neural network method. The features and applications of these methods are analyzed and compared. By integrating the advantages of these methods, a fusion forecasting approach and a data preprocessing technique are proposed for improving the forecasting accuracy. A comparative study based on real load data is performed to verify that the proposed approach is capable of achieving a relatively higher forecasting accuracy.