速度密度 10m/s住宅

本文通过一次参加日本《新建筑》国际住宅竞赛的经历，就未来高密度城市环境中住宅的生存状态进行了探讨。并试图用以速度来定义密度的方式探索当私密性与公共交往之间出现不可调和的矛盾时一种新的解决之道。     

PEO-b-PBA对天然橡胶/高吸水树脂共混体系增容作用的研究

通过扫描电子显微镜观察了天然橡胶和高吸水树脂共混体系的微观相态结构 ,研究了两亲性嵌段共聚物PEO b PBA结构本身的吸水能力对天然橡胶和高吸水性树脂共混体系吸水性能及力学性能的影响。结果表明 ,PEO b PBA结构本身的吸水强弱对共混体系的吸水能力贡献很小 ,但却可以显著提高共混体系的吸水膨胀能力和力学性能 ,对特殊的增容作用进行了探讨     

Mechanical and thermal properties of HVOF sprayed Ni based alloys with carbide

The objective of the present study is to develop multi-functioned coating to the components, which are made of copper with electroplated Ni and are widely used for steel making industry. In this paper, we report the mechanical and thermal properties of Ni based superalloys with carbide sprayed by high velocity oxygen fuel (HVOF), and the detailed effects of sprayed material, spraying conditions, and initial powder structure on these properties. It was found that, among commercial Ni self-fluxing alloys (without fusing treatment), coating with a carbon content of 0.58 mass% had the most preferable properties, with a good balance of the hardness, strength, and thermal shock resistance. The thermal shock resistance depended not only on the strength of the coating but also on the volume contraction when tested at high temperatures. For the several developed Ni based superalloys with carbide, Ni20Cr8Mo5Fe–WC and Ni16Cr15Mo3–WC demonstrated the prominent adhesion strength and thermal shock resistance with high Galvanic corrosion resistance through optimized spraying condition. Also, 20 mass% NiCr–Cr₃C₂ coating sprayed by using employed relatively small primary particle succeeded in achieving the multi-superior properties; high adhesion strength, high corrosion resistance and thermal shock resistance.     

载人航天高可靠伺服技术

回顾了载人航天高可靠伺服技术的研制道路，介绍了用于载人航天火箭推力矢量控制中的新型三余度伺服机构的技术特点，对载人航天伺服技术的未来发展进行了分析和展望。     

铝合金高速船船体建造工艺

简述了ＬＦ１５和ＬＦ１６两种新型船用耐蚀可焊铝合金及其配套焊接材料在实船建造中的应用情况。阐述了铝合金全焊结构船体建造的关键技术及我国铝船体建造的３种方法     

简易高性能纳秒脉冲发生器

为了实现电子散射飞行时间谱仪电子束的脉冲化及产生时一幅变换器的启动或停止信号。我们利用开关晶体管的雪崩特性研制了一个性能好，成本低的纳秒脉冲发生器。该发生器输出上升时间好于Ｉｎｓ，幅度达１０Ｖ的负尖脉冲，用作时一幅变换器的启动或停止信号；也输出上升时间约３ｎｓ，幅度５－３０Ｖ连续可调和宽度５－２３０ｎｓ可调的正脉冲，用作电子束脉冲化的调制信号，脉冲重复率为１５０×１０＾３ｓ＾－１。它可广泛用于类似     

高纯锗探测器的快定时性能及其应用

为了将高纯锗（ＨＰＧｅ）探测器用于快定时的物理实验中，本实验研究厂影响高纯锗探测器定时谱仪时间性能的各种因素，找出了获得谱仪最小时间分辨的各种最佳参数。并建立了分辨时间为４．１９ｎｓ，能量分辨率为２０ｋｅＶ，微分非线性好于±２．０％，计效率可承受１２０×１０￣３ｓ￣（－１）的时间微分扰动角关联谱仪。利用此谱仪，以￣（２０４）Ｂｉ为探针核，研究了Ｂｉ系高温超导的微观机理，取得了较好的结果。     

Systematic analysis of neutron yields from thick targets bombarded by heavy ions and protons with moving source model

A simple phenomenological analysis using the moving source model has been performed on the neutron energy spectra produced by bombarding thick targets with high energy heavy ions which have been systematically measured at the Heavy-Ion Medical Accelerator (HIMAC) facility (located in Chiba, Japan) of the National Institute of Radiological Sciences (NIRS). For the bombardment of both heavy ions and protons in the energy region of 100–500 MeV per nucleon, the moving source model incorporating the knock-on process could be generally successful in reproducing the measured neutron spectra within a factor of two margin of accuracy. This phenomenological analytical equation is expressed having several parameters as functions of atomic number Z_p, mass number A_p, energy per nucleon E_p for projectile, and atomic number Z_T, mass number A_T for target. By inputting these basic data for projectile and target into this equation we can easily estimate the secondary neutron energy spectra at an emission angle of 0–90° for bombardment with heavy ions and protons in the aforementioned energy region. This method will be quite useful to estimate the neutron source term in the neutron shielding design of high energy proton and heavy ion accelerators.     

甲醇蒸汽转化炉炉管损伤分析及修复

通过对乙烯厂甲醇车间蒸汽转化炉炉管的材料成分、力学性能、金相组织等的分析，确定定其失效模式为高温蠕变损伤，找到造成及影响炉管失效的主要因素。并对炉管的修复以及预防提出了有效的方法及建议。     

回火处理对高碳冷拔钢丝强度和塑性的影响

研究了６５钢冷拔钢丝在５００℃不同时间回火时的抗拉强度和延伸率的变化。试验结果发现，在回火初期，抗拉强度首先增长，然后随口火时间的延长连续降低，而延伸率始终在增长，增长速度是先快后慢。这种行为可归因于第一内应力的消除和ε－碳化物在形变铁素体中的析出以及后来再结晶的发生。