长管串井下分离器及尾管举升抽油工艺技术

针对常规防气工艺存在的防气效果不理想、适用范围小、无法使气体影响严重的油井正常生产等问题,研制了长管串井下分离器及尾管举升工艺技术,该工艺以套管和油管间的环形空间为沉降分离体,沉降分离空间大;解决了常规防气工艺适用范围小的工艺难题,并且该装置使混气液转向沉降分离流速降低,利于更细小的气泡分离,使气体分离更彻底,对油气比越高的井效果较明显。经现场对16口井的试验表明,可有效减少气体影响,提高油井泵效。该分离器的试用有效率高,取得了明显的经济效益。     

多掺炼新疆渣油的催化裂化工业生产技术

兰州石化公司以加工新疆原油为主，重油收率高，平均在37％左右，所生产的重油主要靠催化裂化装置来加工，多余部分以低附加值重油出厂。随着涩宁兰天然气工程的逐渐建成，低附加值重油出厂将受到严重威胁，因此，催化裂化装置加工重油显得尤为重要。兰州石化公司炼油厂1.2Mt/a重催装置通过采用先进技术进行改造，使重油掺炼比由41.52%提高到52.20%，提高了10.68个百分点，年多加工重油14.95万t，产品收率达到79.20%以上，能够灵活调节产品结构，创造了良好的经济效益。     

复合地基中优化设计参数的方法

本文给出了复合地基应力比置换率设计的优化方法,讨论了复合地基中应力比的基本概念和影响因素,可供工程应用时参考。     

土壤固化剂无侧限抗压强度试验研究

针对山西省长治市石子河河道处理问题 ,采用固化剂粘土进行了无侧限抗压强度试验 ,并与水泥土进行了比较。发现固化剂 2的无侧限抗压试验强度最佳 ,为工地现场试验及河道综合治理提供了更为有力的理论依据     

舞钢扁钢锭咬边参数的确定

本文根据我公司自产的11.7t及13.34t扁钢锭在4200mm轧机生产过程中,运用正交试验方法,合理应用咬边参数的轧制方案,以此降低金属消耗。此方案使“咬入返回轧制”及“留尾轧制”新技术进一步得到完善,板形更加矩形,使锭一材成材率提高2％左右。     

单齿圈牙轮钻头轮体速比的计算机仿真

为进行整个牙轮钻头轮体速比的仿真研究，先研究了单齿圈牙轮钻头轮体速比仿真。借助钻头几何学、运动学和已建立的岩石与牙齿互作用力学模型，在一定假设的基础上建立了牙齿运动和受力、牙轮扭矩、牙轮角速度和角加速度等的仿真模型。用计算机程序模拟单齿圈牙轮钻头在给定岩石中的钻进过程，得到了单齿圈牙轮转速与钻头体转速的比值（轮体速比）的变化规律。接着用软件试验探索岩石、钻压、移轴距对单齿圈牙轮钻头轮体速比的影响。仿真软件试验结果与台架实物试验结果的比较证明，这种仿真方法是可行的。     

Analysis and Optimization Laminar Viscous Flow Through a Channel

Optimizing of laminar viscous flow through a pipe by two dimensionless values is investigated analytically. Dimensionless entropy generation and pumping power to heat transfer rate ratio are used as basis for constant viscous and the temperature dependence on the viscosity. For this matter we calculate entropy generation and pumping power for a fully developed in a pipe subjected to constant wall temperature for either constant viscosity and the variable viscosity. The variation entropy generation increase along the pipe length for viscous fluid is drawn, either the variation summation dimensionless entropy generation and the pumping power to heat transfer rate ratio are varying the fluid inlet temperature for fixed pipe length and are varying pipe length for fixed fluid inlet temperature are drawn. For low heat transfer conditions the entropy generation due to viscosity friction becomes dominant and the dependence of viscosity with the temperature becomes essentially important to be considered.     

A new method of characterization for stratified thermal energy stores

A new method for characterization of stratified thermal energy stores (TES) that integrates both the first law and the second law concerns is presented here. The first law concern is incorporated into a quantity called energy response factor and the second law concern into an entropy generation ratio. A product of these two quantities is at the heart of the TES efficiency definitions. This approach removes the overemphasis of the existing methods either on the first or the second law of thermodynamics which often biases the characterization results. The information about the evolution of the temperature field of the system in time is the prerequisite of the new method. It may be obtained from experiments or from suitable numerical simulations. The current method can be easily integrated into computational fluid dynamic (CFD) simulations and thus facilitate CFD-based design analysis. As an example of such CFD-integrated analysis, a large-scale hot water seasonal heat store is numerically studied to identify the effects of aspect ratio, containment shape, internal structures, and containment size on their efficiency. The results suggest the effectiveness of the new method in deriving useful design insights.     

一种混沌信号去噪方法的研究

以Takens嵌入定理和影子定理为理论依据，提出一种能对混沌信号去噪的局部投影方法。该方法不需潜在动力学系统的先验知识，符合工程实用的要求。通过实验结果表明这种方法对混沌信号去噪很有效。     

EFFECT OF THE RATIO Th/U ON TL DATING ACCURACY

ＥＦＦＥＣＴＯＦＴＨＥＲＡＴＩＯＴｈ／ＵＯＮＴＬＤＡＴＩＮＧＡＣＣＵＲＡＣＹ￥Ｐ．Ｌ．Ｌｅｕｎｇ（梁宝鎏）；ＭｉｃｈａｅｌＪ．Ｓｔｏｋｅｓ（ＤｅｐａｒｔｍｅｎｔｏｆＰｈｙｓｉｃｓａｎｄＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅ，ＣｉｔｙＰｏｌｙｔｅｃｈｎｉｃｏ...