Surface chemistry and mechanical property changes of wood‐flour/high‐density‐polyethylene composites after accelerated weathering

Although wood–plastic composites have become more accepted and used in recent years and are promoted as low‐maintenance, high‐durability building products, they do experience a color change and a loss in mechanical properties with accelerated weathering. In this study, we attempted to characterize the modulus‐of‐elasticity (MOE) loss of photostabilized high‐density polyethylene (HDPE) and composites of wood flour and high‐density polyethylene (WF/HDPE) with accelerated weathering. We then examined how weathering changed the surface chemistry of the composites and looked at whether or not the surface changes were related to the MOE loss. By examining surface chemistry changes, we hoped to begin to understand what caused the weathering changes. The materials were left unstabilized or were stabilized with either an ultraviolet absorber or pigment. After 1000 and 2000 h of accelerated weathering, the samples were tested for MOE loss. Fourier transform infrared (FTIR) spectroscopy was employed to monitor carbonyl and vinyl group formation at the surface. Changes in the HDPE crystallinity were also determined with FTIR techniques. It was determined that structural changes in the samples (carbonyl group formation, terminal vinyl group formation, and crystallinity changes) could not be reliably used to predict changes in MOE with a simple linear relationship. This indicated that the effects of crosslinking, chain scission, and crystallinity changes due to ultraviolet exposure and interfacial degradation due to moisture exposure were interrelated factors for the weathering of HDPE and WF/HDPE composites. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2263–2273, 2004     

Characterization of ramie yarn treated with sodium hydroxide and crosslinked by 1,2,3,4‐butanetetracarboxylic acid

Ramie yarns were treated with various concentrations of NaOH at room temperature and subsequently crosslinked with 1,2,3,4‐butanetetracarboxylic acid (BTCA). The microstructure and tensile properties of the treated yarns were characterized. X‐ray diffraction (XRD) and FTIR were used to study the crystalline structure of the resultant ramie yarns. The results showed that the maximum change in the structure of the alkali‐modified ramie took place at 16% NaOH, which would completely transform cellulose I to cellulose II. At the same time, the crystallinity index and fiber orientation decreased to the minimum value while the absorption properties were enhanced. The average degree of polymerization (DP ) of the treated ramie yarns slightly decreased after NaOH treatment. Tensile properties including tenacity, breaking elongation, and modulus of the treated yarns were also investigated. Scanning electron microscopy (SEM) was used to investigate the breakage of the treated yarns. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1857–1864, 2004     

HEDP与Ge(IV)固体配合物的研究

在常规条件下合成了1-羟基乙叉-1,1-二膦酸(简称HEDP)与Ge(IV)的固体配合物。用元素分析和热分析确定了配合物的组成为:Ge2(OH)4L·3H2O(Ⅰ),L=CH3C(OH)(PO3)2。用红外光谱和热分析对配合物的结构及热稳定性作了较系统的研究。     

Alumina-, niobia-, and niobia/alumina-supported NiMoS catalysts: Surface properties and activities in the hydrodesulfurization of thiophene and hydrodenitrogenation of 2,6-dimethylaniline

The activity of NiMoS catalysts supported on niobia, alumina, and niobia/alumina was compared for the thiophene hydrodesulfurization (HDS) and 2,6-dimethylaniline (2,6-DMA) hydrodenitrogenation (HDN) reactions. To evaluate the acidity of the supports and identify the nature of the sulfide sites, adsorption of 2,6-dimethylpyridine, pyridine, and CO was performed and followed by IR spectroscopy. This study has shown that with niobia as a support, the activity of NiMoS catalysts in thiophene HDS and in HDN of 2,6-DMA was no longer promoted by the synergy between Ni and Mo. The absence of synergy between molybdenum and nickel on niobia can be explained by the strong interaction of each metal with niobia at the expense of interaction with each other. Moreover, it has been shown that on a niobia/alumina support, the formation of the NiMoS phase can be directly linked to the presence of alumina not covered by niobia. However, niobia is an interesting support for the HDN of 2,6-DMA, because it favors the formation of xylene through direct ammonia elimination involving low H₂ consumption. The activity for xylene formation on niobia is linked to the electron-deficient nature of the Mo sulfide site, as demonstrated by CO adsorption followed by IR.     

一种小型动/静态双坐标感知系统结构设计

针对提高被动式热释电红外(PIR)传感器的探测距离和范围,提出动/静态双坐标感知系统理论,根据动/静态双坐标感知系统对动态目标实现一定距离内和全范围探测的要求,光学基准传递的要求,提出了小型动/静态双坐标感知系统的结构设计方案。该系统配用红外透镜作为其光学装置,在匀速转台的带动下,实现360°全范围探测红外信号,解决了PIR传感器探测距离和探测视场的矛盾,拓宽了PIR传感器的使用领域。经过实验验证,该系统结构设计合理。     

基于数字式红外传感器的姿态测量盲区补偿法

单轴红外姿态测量系统在测量小型无人机姿态角时存在盲区,通过增加一组与原轴线相垂直的红外传感器,形成双轴姿态测量系统,对盲区进行补偿。两组红外传感器一定有一组位于倾角可测区域,通过测试目标轴的输出温差的大小,判断位于可测区域的轴线,可实现对目标轴姿态角的解算。首次采用数字式输出红外热电堆传感器设计实现了180°无盲区的姿态角测量模块,经过测试,其静态误差小于2°。     

Electrochemical copolymerization of aniline with m-aminophenol and novel electrical properties of the copolymer in the wide pH range

A copolymer, poly(aniline-co-m-aminophenol), has been synthesized using repeated potential cycling. The monomer concentration ratio, acid concentration and applied potential strongly affect the copolymerization rate and the properties of the copolymer. The optimum conditions for the copolymerization are that the scan potential range is controlled between −0.10 and 0.95 V (vs.SCE), and a solution consists of 0.34 M aniline, 0.012 M m-aminophenol and 2 M H₂SO₄. The IR spectra of the copolymers demonstrate that the m-aminophenol units are included in the copolymer chains. The cyclic voltammograms of the copolymers in 0.3 M Na₂SO₄ solution with various pH values were performed at the potential ranges from −0.20 to 0.80 V and at a scan rate of 60 mV s⁻¹. The results indicate that the copolymer still hold 41.7% of the electrochemical activity when the copolymer electrode was transferred from a solution of pH 5.0 to a solution of pH 11.0 in the potential range of −0.20 to 0.80 V. An impedance plot of the copolymer in a solution with pH 12.0 and at 0.40 V is constructed of a semicircle and a Warburg line with a slope of 1. This means that the electrode reaction of the copolymer at pH 12.0 is also under mass transfer control. The conductivity of the copolymer prepared under the optimum conditions is 1.42 S cm⁻¹, and slightly depends on the pH value. Thus, the pH dependence of the electrical properties of the copolymer is improved compared with poly(aniline-co-o-aminophenol), and is much better than that of the parent polyaniline.     

Hydrogen adsorption and hydrogen evolution reaction on a polycrystalline Pt electrode studied by surface-enhanced infrared absorption spectroscopy

Hydrogen evolution reaction (HER) on a polycrystalline Pt electrode has been investigated in Ar-purged acids by surface-enhanced infrared absorption spectroscopy and electrochemical kinetic analysis (Tafel plot). A vibrational mode characteristic to H atom adsorbed at atop sites (terminal H) was observed at 2080-2095 cm⁻¹. This band appears at 0.1 V (RHE) and grows at more negative potentials in parallel to the increase in hydrogen evolution current. Good signal-to-noise ratio of the spectra enabled us to establish the quantitative relation between the band intensity (equivalently, coverage) of terminal H and the kinetics of HER, from which we conclude that terminal H atom is the reaction intermediate in HER and the recombination of two terminal H atoms is the rate-determining step. The quantitative analysis of the infrared data also revealed that the adsorption of terminal H follows the Frumkin isotherm with repulsive interaction.     

Peel Adhesion of Poly(Vinyl Chloride) to Nitrile Rubbers

In addition to molecular interaction and physical entanglement of the molecular chains across the interface in poly (vinyl chloride)-nitrile rubber joints, at high temperatures and long contact times interfacial chemical bonds may be formed which seem to couple the two adherends thereby resulting in cohesive failure of the rubber matrix on peeling. This is verified by performing the peel tests at high temperatures, low peel rates and under swollen conditions. Infrared spectroscopic studies of the PVC/NBR blend reveal the formation of chemical bonds at the contact temperatures studied. The peel fracture energy is found to depend on the acrylonitrile content and presence of carboxylic content in the NBR, and the presence of stabilizer and plasticizer in the PVC phase, in addition to the molding and testing conditions.     

苯乙烯类嵌段共聚物对IR/CR共混物形态结构的影响

考察了苯乙烯类嵌段共聚物对ＩＲ／ＣＲ二元共混物相态结构及粒子尺寸的影响。结果表明，加入苯乙烯类嵌段共聚物可有效改善ＩＲ／ＣＲ共混物的分散状态，在任何组成下均可降低分散相粒子尺寸，促进体系均匀分散，其中苯乙烯－异戊二烯共聚物的效果最为理想，其最佳用量为３～７份。